EN 14187-3:2003

Cold applied joint sealants - Part 3: Test method for the determination of self-levelling properties

This European Standard specifies a test method for determination of the self levelling properties for cold applied joint sealants for use in joints in roads, air fields and other exposed concrete pavements.

Kalt verarbeitbare Fugenmassen - Teil 3: Prüfverfahren zur Bestimmung der selbstverlaufenden Eigenschaften

Diese Europäische Norm legt ein Prüfverfahren für die Bestimmung der selbstverlaufenden Eigenschaften von kalt verarbeitbaren Fugenmassen fest, die für Fugen auf Straßen, Flugplätzen und anderen belasteten Betondecken verwendet werden.

Mastics pour joints appliqués à froid - Partie 3: Méthodes d'essai pour la détermination des propriétés d'auto-nivellement

La présente Norme européenne spécifie une méthode d'essai permettant de déterminer les propriétés d'auto-nivellement des mastics pour joints utilisés pour les routes, pistes d'aviation et autres chaussées en béton à nu.

Hladno nanosljive tesnilne mase za stike – 3. del: Preskusna metoda za ugotavljanje samoizravnalnih lastnosti

General Information

• Status: Withdrawn
• Publication Date: 17-Jun-2003
• Withdrawal Date: 28-Mar-2017
• ICS: 93.080.20 - Road construction materials
• Technical Committee: CEN/TC 227 - Road materials
• Drafting Committee: CEN/TC 227/WG 3 - Materials for concrete roads including joint fillers and sealants
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 29-Mar-2017
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/124 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on road construction products
• Ref Project: SIST EN 14187-3:2004 - Cold applied joint sealants - Part 3: Test method for the determination of self-levelling properties

Relations

• Replaced By: EN 14187-3:2017 - Cold applied joint sealants - Test methods - Part 3: Determination of self-levelling properties
• Effective Date: 04-Apr-2017

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Hladno nanosljive tesnilne mase za stike – 3. del: Preskusna metoda za ugotavljanje samoizravnalnih lastnostiKalt verarbeitbare Fugenmassen - Teil 3: Prüfverfahren zur Bestimmung der selbstverlaufenden EigenschaftenMastics pour joints appliqués a froid - Partie 3: Méthodes d'essai pour la détermination des propriétés d'auto-nivellementCold applied joint sealants - Part 3: Test method for the determination of self-levelling properties93.080.20Materiali za gradnjo cestRoad construction materials91.100.50Veziva. Tesnilni materialiBinders. Sealing materialsICS:Ta slovenski standard je istoveten z:EN 14187-3:2003SIST EN 14187-3:2004en01-junij-2004SIST EN 14187-3:2004SLOVENSKI
STANDARD



SIST EN 14187-3:2004



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14187-3April 2003ICS 93.080.20English versionCold applied joint sealants - Part 3: Test method for thedetermination of self-levelling propertiesMastics pour joints appliqués à froid - Partie 3: Méthodesd'essai pour la détermination des propriétés d'autonivellementKalt verarbeitbare Fugenmassen - Teil 3: Prüfverfahren zurBestimmung der selbstverlaufenden EigenschaftenThis European Standard was approved by CEN on 25 March 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14187-3:2003 ESIST EN 14187-3:2004



EN 14187-3:2003 (E)2ContentspageForeword.31Scope.32Normative references.33Terms and definitions.44Principle.45Apparatus and materials.46Conditioning.57Procedure.58Test report.6SIST EN 14187-3:2004



EN 14187-3:2003 (E)3ForewordThis document (EN 14187-3:2003) has been prepared by Technical Committee CEN/TC 227 "Road materials", thesecretariat of which is held by DIN.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by December 2003, and conflicting national standards shall be withdrawn at the latestby March 2005.This European Standard is one of a series of standards as listed below:EN 14187-1, Cold applied joint sealants — Part 1: Test method for the determination of the rate of cure.EN 14187-2, Cold applied joint sealants — Part 2: Test method for the determination of tack free time.EN 14187-3, Cold applied joint sealants — Part 3: Test method for the determination of self-levelling properties.EN 14187-4, Cold applied joint sealants — Part 4: Test method for the determination of the change in mass andvolume after immersion in test fuel.EN 14187-5, Cold applie
...