Concrete pavements - Part 6: Test method for the determination of the tensile strength of concrete on cylindrical discs

This document specifies a method for the determination of the tensile strength on cylindrical discs of concrete using cylindrical discs as test specimens, which can be separately manufactured or cut from cores of the finished concrete pavement.

Fahrbahnbefestigungen aus Beton - Teil 6: Prüfverfahren zur Bestimmung der Zugfestigkeit von Beton an Zylinderscheiben

Dieses Dokument legt ein Verfahren zur Bestimmung der Zugfestigkeit von Beton an Zylinderscheiben fest, wobei als Probekörper Zylinderscheiben verwendet werden, die entweder separat hergestellt oder aus Bohrkernen der fertigen Fahrbahnbefestigung aus Beton geschnitten werden können.

Chaussées en béton - Partie 6 : Méthodes d'essai pour la détermination de la résistance à la traction de béton sur disques cylindriques

Le présent document spécifie une méthode de détermination de la résistance à la traction de béton sur disques cylindriques, les disques cylindriques servant d’éprouvettes pouvant être
-   fabriqués séparément ou
-   obtenus à partir de coupes de carottes prélevées dans la chaussée en béton finie.

Betonska vozišča - 6. del: Preskusna metoda za določanje natezne trdnosti betona na cilindričnih ploščah

Ta dokument določa metodo za določanje natezne trdnosti betona na cilindričnih ploščah, ki se uporabljajo kot vzorci in so lahko:
–   izdelane ločeno ali
–   izrezane iz jeder končnega betonskega vozišča.

General Information

Status
Published
Publication Date
19-Mar-2024
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
20-Mar-2024
Due Date
27-Jan-2023
Completion Date
20-Mar-2024

Buy Standard

Standard
EN 13863-6:2024 - BARVE
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-junij-2024
Betonska vozišča - 6. del: Preskusna metoda za določanje natezne trdnosti betona
na cilindričnih ploščah
Concrete pavements - Part 6: Test method for the determination of the tensile strength of
concrete on cylindrical discs
Fahrbahnbefestigungen aus Beton - Teil 6: Prüfverfahren zur Bestimmung der
Zugfestigkeit von Beton an Zylinderscheiben
Chaussées en béton - Partie 6 : Méthodes d'essai pour la détermination de la résistance
à la traction de béton sur disques cylindriques
Ta slovenski standard je istoveten z: EN 13863-6:2024
ICS:
91.100.30 Beton in betonski izdelki Concrete and concrete
products
93.080.20 Materiali za gradnjo cest Road construction materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 13863-6
EUROPEAN STANDARD
NORME EUROPÉENNE
March 2024
EUROPÄISCHE NORM
ICS 93.080.20
English Version
Concrete pavements - Part 6: Test method for the
determination of the tensile strength of concrete on
cylindrical discs
Chaussées en béton - Partie 6 : Méthodes d'essai pour Fahrbahnbefestigungen aus Beton - Teil 6:
la détermination de la résistance à la traction de béton Prüfverfahren zur Bestimmung der Zugfestigkeit von
sur disques cylindriques Beton an Zylinderscheiben
This European Standard was approved by CEN on 12 February 2024.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13863-6:2024 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions and symbols . 4
3.1 Terms and definitions . 4
3.2 Symbols . 5
4 Principle . 5
5 Apparatus . 6
5.1 Apparatus for production of the test specimens . 6
5.2 Load equipment . 6
6 Test specimen . 8
6.1 General. 8
6.2 Sampling/production, preparation and storage of test specimens . 8
6.2.1 Separately manufactured test specimens . 8
6.2.2 Test specimens made of cores . 8
7 Procedure . 9
8 Calculation and presentation of the test result . 9
8.1 Test result . 9
8.2 Precision . 9
9 Report . 10
Annex A (informative) Typical fracture patterns . 12

European foreword
This document (EN 13863-6:2024) has been prepared by Technical Committee CEN/TC 227 “Road
materials”, the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2024, and conflicting national standards shall
be withdrawn at the latest by September 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
EN 13863, Concrete pavements, is currently composed with the following parts:
— Part 1: Test method for the determination of the thickness of a concrete pavement by survey method
— Part 2: Test method for the determination of the bond between two layers
— Part 3: Test methods for the determination of the thickness of a concrete pavement from cores
— Part 4: Test methods for the determination of wear resistance of concrete pavements to studded
tyres
— Part 5: Determination of the bond stress of dowels to be used in concrete pavements
— Part 6: Test method for the determination of the tensile strength of concrete on cylindrical discs
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,
Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North
Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the United
Kingdom.
1 Scope
This document specifies a method for the determination of the tensile strength on cylindrical discs of
concrete using cylindrical discs as test specimens, which can be separately manufactured or cut from
cores of the finished concrete pavement.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 12390-1, Testing hardened concrete — Part 1: Shape, dimensions and other requirements for specimens
and moulds
EN 12390-2, Testing hardened concrete — Part 2: Making and curing specimens for strength tests
EN 12390-4, Testing hardened concrete — Part 4: Compressive strength — Specification for testing
machines
EN 12390-7, Testing hardened concrete — Part 7: Density of hardened concrete
3 Terms and definitions and symbols
For the purposes of this document, the following terms, definitions and symbols apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— IEC Electropedia: available at https://www.electropedia.org/
— ISO Online browsing platform: available at https://www.iso.org/obp
3.1 Terms and definitions
3.1.1
tensile strength on cylindrical discs
maximum stress determined by a controlled uniaxial, radial load on a test specimen until failure
3.1.2
test specimen
cylindrical disc prepared from a separately manufactured cylinder or core
3.2 Symbols
The signification of the sy
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.