Explosives for civil uses - Detonators and detonating cord relays - Part 11: Determination of resistance to damage by dropping of detonators and relays

This document specifies methods for determination of resistance to damage by dropping unto a hard surface for non-electric detonators, electric detonators, electronic detonators, plain detonators, detonating cord relays or surface connectors.  
This document is applicable to explosives for civil uses.

Explosivstoffe für zivile Zwecke - Zünder und Sprengschnurverbinder - Teil 11: Bestimmung der Widerstandsfähigkeit von Zündern und Verzögerungselementen gegen Fall

Dieses Dokument legt Verfahren für die Bestimmung der Widerstandsfähigkeit von nichtelektrischen Zündern, elektrischen Zündern, elektronischen Zündern, Sprengkapseln, Sprengschnurverbinder oder Oberflächenverbindern gegen Beschädigung fest, wenn sie auf einen harten Untergrund fallen gelassen werden.
Dieses Dokument gilt für Explosivstoffe für zivile Zwecke.

Explosifs à usage civil - Détonateurs et relais pour cordeau détonant - Partie 11 : Détermination de la résistance des détonateurs et relais à la chute

Le présent document précise les méthodes de détermination de la résistance aux dommages en cas de chute sur une surface dure pour les détonateurs non électriques, les détonateurs électriques, les détonateurs électroniques, les détonateurs pyrotechniques, les relais pour cordeau détonant ou les connecteurs de surface.
Le présent document s’applique aux explosifs à usage civil.

Eksplozivi za civilno uporabo - Detonatorji in zakasnilniki - 11. del: Ugotavljanje odpornosti detonatorjev in zakasnilnikov proti padu

General Information

Status
Not Published
Publication Date
29-May-2023
Current Stage
4599 - Dispatch of FV draft to CMC - Finalization for Vote
Start Date
15-Dec-2023
Completion Date
15-Dec-2023

Relations

Buy Standard

Draft
prEN 13763-11:2021
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 13763-11:2021
01-april-2021
Eksplozivi za civilno uporabo - Detonatorji in zakasnilniki - 11. del: Ugotavljanje
odpornosti detonatorjev in zakasnilnikov proti padu
Explosives for civil uses - Detonators and relays - Part 11: Determination of resistance to
damage by dropping of detonators and relays
Explosivstoffe für zivile Zwecke - Zünder und Verzögerungselemente - Teil 11:
Bestimmung der Widerstandsfähigkeit von Zündern und Verzögerungselementen gegen
Fall
Explosifs à usage civil - Détonateurs et relais - Partie 11: Détermination de la résistance
des détonateurs et relais à la chute
Ta slovenski standard je istoveten z: prEN 13763-11
ICS:
71.100.30 Eksplozivi. Pirotehnika in Explosives. Pyrotechnics and
ognjemeti fireworks
oSIST prEN 13763-11:2021 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 13763-11:2021

---------------------- Page: 2 ----------------------
oSIST prEN 13763-11:2021


DRAFT
EUROPEAN STANDARD
prEN 13763-11
NORME EUROPÉENNE

EUROPÄISCHE NORM

April 2021
ICS 71.100.30 Will supersede EN 13763-11:2003
English Version

Explosives for civil uses - Detonators and detonating cord
relays - Part 11: Determination of resistance to damage by
dropping of detonators and relays
Explosifs à usage civil - Détonateurs et relais pour Explosivstoffe für zivile Zwecke - Zünder und
cordeau détonant - Partie 11: Détermination de la Sprengschnurverbinder - Teil 11: Bestimmung der
résistance des détonateurs et relais à la chute Widerstandsfähigkeit von Zündern und
Verzögerungselementen gegen Fall
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 321.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 13763-11:2021 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 13763-11:2021
prEN 13763-11:2021 (E)
Contents Page
European foreword . 3
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Principle . 6
5 Apparatus . 6
5.1 Free-fall drop test . 6
5.2 Guided drop test .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.