EN ISO 19440:2007
(Main)Enterprise integration - Constructs for enterprise modelling (ISO 19440:2007)
Enterprise integration - Constructs for enterprise modelling (ISO 19440:2007)
ISO 19440:2007 specifies the characteristics of the core constructs necessary for computer-supported modelling of enterprises conforming to ISO 19439.
ISO 19440:2007 focuses on, but is not restricted to, the computer integration of the information aspects of manufacturing, including the management and control technology and the required human tasks. It does not specify how these core constructs for model-based operations are to be implemented and, in particular, it does not include the control language needed to specify and execute (internal) activity behaviour, nor the mapping between functional operations and capabilities.
Unternehmensintegration - Konstrukte zur Unternehmensmodellierung (ISO 19440:2007)
Diese Europäische/Internationale Norm legt die Merkmale der für die rechnerunterstützte Modellierung von Unternehmen erforderlichen Schlüsselkonstrukte fest.
ANMERKUNG Die rechnerunterstützte Modellierung von Unternehmen kann eine Vorstufe bei der Rechnerintegration oder ein Zwischenglied bei der Mensch-System-Vermittlung darstellen.
Sie hat ihren Schwerpunkt auf der Rechnerintegration der Informationsaspekte der Fertigung, einschließlich des Managements, der Steuerungstechnologie und der durch den Menschen auszuführenden Aufgaben, wobei sie jedoch nicht darauf beschränkt ist.
Entreprise intégrée - Constructions pour la modélisation d'entreprise (ISO 19440:2007)
L'ISO 19440:2007 spécifie les caractéristiques du noyau de constructs nécessaires pour la modélisation d'entreprise assistée par ordinateur en conformité avec l'ISO 19439.
L'ISO 19440:2007 privilégie, mais ne se limite pas à l'intégration par ordinateur de l'aspect informationnel de la fabrication, y compris la gestion et le contrôle technologique et les tâches humaines. Elle ne spécifie pas la manière dont ce noyau de constructs destinés à des opérations basées sur des modèles, doivent être mis en place et, en particulier, elle n'inclut pas le langage de contrôle nécessaire pour spécifier et concrétiser un comportement (interne) d'activité, ni la mise en correspondance entre opérations fonctionnelles et aptitudes.
Integracija podjetij - Konstrukti za podjetniško modeliranje (ISO 19440:2007)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-februar-2008
1DGRPHãþD
SIST ENV 12204:2003
Integracija podjetij - Konstrukti za podjetniško modeliranje (ISO 19440:2007)
Enterprise integration - Constructs for enterprise modelling (ISO 19440:2007)
Unternehmensintegration - Konstrukte für die Unternehmensmodellierung (ISO
19440:2007)
Entreprise intégrée - Constructions pour la modélisation d'entreprise (ISO 19440:2007)
Ta slovenski standard je istoveten z: EN ISO 19440:2007
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.240.50 Uporabniške rešitve IT v IT applications in industry
industriji
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 19440
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2007
ICS 25.040.40 Supersedes ENV 12204:1996
English Version
Enterprise integration - Constructs for enterprise modelling (ISO
19440:2007)
Entreprise intégrée - Constructions pour la modélisation Unternehmensintegration - Konstrukte zur
d'entreprise (ISO 19440:2007) Unternehmensmodellierung (ISO 19440:2007)
This European Standard was approved by CEN on 27 August 2007.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2007 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 19440:2007: E
worldwide for CEN national Members.
Contents Page
Foreword.3
Foreword
This document (EN ISO 19440:2007) has been prepared by Technical Committee CEN/TC 310 "Advanced
Manufacturing Technologies", the secretariat of which is held by BSI, in collaboration with Technical
Committee ISO/TC 184 "Industrial automation systems and integration".
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by June 2008, and conflicting national standards shall be withdrawn at
the latest by June 2008.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes ENV 12204:1996.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
INTERNATIONAL ISO
STANDARD 19440
First edition
2007-12-01
Enterprise integration — Constructs
for enterprise modelling
Entreprise intégrée — Constructions pour la modélisation d'entreprise
Reference number
ISO 19440:2007(E)
©
ISO 2007
ISO19440:2007(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2007
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2007 – All rights reserved
ISO 19440:2007(E)
Contents Page
Foreword. iv
Introduction . v
1 Scope . 1
2 Normative references . 1
3 Terms, definitions and abbreviated terms . 1
3.1 Terms and definitions. 1
3.2 Abbreviated terms . 10
4 Common characteristics of modelling language constructs. 11
5 Representations, relationships, roles and complementary concepts . 12
5.1 Range of representation . 12
5.2 Common structure and template for modelling language constructs . 13
5.3 Representation of attributes. 14
5.4 Representation of relationships. 14
5.5 Specializations . 15
5.6 Roles . 15
5.7 Complementary concepts. 16
6 The modelling language constructs . 16
6.1 Overview of constructs . 16
6.2 Domain. 19
6.3 Business Process. 21
6.4 Enterprise Activity . 23
6.5 Event . 26
6.6 Enterprise Object. 28
6.7 Enterprise Object View (Object View). 30
6.8 Product . 31
6.9 Order . 32
6.10 Resource. 34
6.11 Capability. 36
6.12 Functional Entity. 37
6.13 Organizational Unit. 39
6.14 Decision Centre. 41
6.15 Person Profile. 43
6.16 Organizational Role . 44
6.17 Operational Role . 45
7 Compliance principles. 47
Annex A (normative) Behavioural rules — Detailed description and syntax. 48
Annex B (informative) Rationale . 58
Annex C (informative) Overview of modelling language constructs and relationships . 62
Annex D (informative) Demonstration of applicability of this International Standard to other
initiatives . 69
Annex E (informative) Example usages of constructs and complementary concepts . 89
Bibliography . 111
ISO 19440:2007(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 19440 was prepared by the European Committee for Standardization (CEN) Technical Committee
CEN/TC 310, Advanced manufacturing technologies, in collaboration with Technical Committee ISO/TC 184,
Industrial automation systems and integration, Subcommittee SC 5, Architecture, communications and
integration frameworks, in accordance with the Agreement on technical cooperation between ISO and CEN
(Vienna Agreement).
iv © ISO 2007 – All rights reserved
ISO 19440:2007(E)
Introduction
0.1 Background
This International Standard defines the generic concepts that are required to enable the creation of enterprise
models for industrial businesses and to provide support for the use of frameworks by industrial enterprises.
This International Standard builds upon ISO 19439 by defining and detailing a set of conformant user-oriented
modelling language constructs, which provide common semantics and enable the unification of models
developed by different stakeholders in the various phases of model development. Such models are aimed at
model-based support of operational decision-making and can be employed for model-based operation
monitoring and control
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.