iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 14093:2002

(Main)

Space project management - Organization and conduct of reviews

Space project management - Organization and conduct of reviews

This European Standard provides means for identifying and structuring all of the activities and information required in a project review. It identifies the information outputs and follow­up activities necessary to complete the review process. It also provides a check­list of activities and information required for each of the major project reviews identified in the European space management standards.
This standard does not prescribe a particular review procedure or organizational structure to be applied, in order to respect the customer's own rules and regulations.
When viewed from the perspective of a specific project context, the requirements defined in this standard should be tailored to match the genuine requirements of a particular profile and circumstances of a project.
NOTE   Tailoring is a process by which individual requirements of specifications, standards and related documents are evaluated and made applicable to a specific project by selection, and in some exceptional cases, modification of existing or addition of new requirements.

Raumfahrtprojektmanagement - Organisation und Durchführung von Reviews

Diese Norm liefert die Mittel zur Bestimmung und Strukturierung der Informationen und Tätigkeiten, die bei einem Projektreview erforderlich sind. Sie legt die Ziele der Information und Tätigkeiten fest, die für die Durchführung des Reviews erforderlich sind. Weiterhin gibt sie in Form einer Checkliste die Informationen und Tätigkeiten an, die für die bei den ECSS-Normen zum Projektmanagement genannten wichtigen Reviews erforderlich sind.
Diese Norm schreibt kein bestimmtes Verfahren für die Durchführung von Reviews oder die entsprechende Organisationsstruktur vor, soweit die internen Richtlinien und Vorschriften des Kunden betroffen sind.
Unter projektspezifischen Gesichtspunkten sollten die in dieser Norm definierten Anforderungen angepasst werden, um dem jeweiligen Projektprofil und Projektumständen Rechnung zu tragen.
ANMERKUNG   Anpassung ist ein Prozess, in dem einzelne Anforderungen oder Spezifikationen, Normen und ähnliche Dokumente nach Bewertung für ein bestimmtes Projekt ausgewählt werden. Die einzelnen Vertragsbedingungen können eine Streichung, Ergänzung oder Modifikation der Anforderungen dieser Norm erforderlich machen.

Management des projets spatiaux - Organisation et conduite de revues

La présente Norme européenne donne les moyens d'identifier et de structurer toutes les activités et informations indispensables aux revues de projet. Elle identifie les informations à produire et les activités de suivi nécessaires pour compléter le processus de revue. Elle fournit également une liste de vérification des activités et informations requises pour chacune des principales revues de projet identifiées dans les normes de management de l'ECSS.
La présente norme ne prescrit aucune procédure de revue ou structure organisationnelle particulière afin de respecter les règles et réglementations propres au client.
Dans le contexte d'un projet donné, il convient d'adapter les exigences définies dans la présente norme pour qu'elles correspondent aux exigences initiales d'un profil particulier et des circonstances d'un projet.
NOTE   L'adaptation est un processus par lequel des exigences individuelles relatives aux spécifications, normes et documents associés sont évaluées et rendues applicables à un projet spécifique par sélection et, dans des cas exceptionnels, par modification de l'existant ou ajout de nouvelles exigences.

Space project management - Organization and conduct of reviews

General Information

Status
Withdrawn
Publication Date
19-Feb-2002
Withdrawal Date
19-Aug-2014
ICS
49.140 - Space systems and operations
Technical Committee
CEN/SS T02 - Aerospace
Drafting Committee
CEN/SS T02 - Aerospace
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
20-Aug-2014
Mandate
M/237 - Mandate to CEN, CENELEC and ETSI for standardization in the field of equipment for the space industry
Ref Project
SIST EN 14093:2004 - Space project management - Organization and conduct of reviews

Relations

Replaced By
EN 16601-10-01:2014 - Space project management - Part 10-01: Organization and conduct of reviews
Effective Date
29-May-2013

Buy Standard

EN 14093:2004EN 14093:2004
PreviousNext
Standard
EN 14093:2004
English language
25 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Space project management - Organization and conduct of reviewsRaumfahrtprojektmanagement - Organisation und Durchführung von ReviewsManagement des projets spatiaux - Organisation et conduite de revuesSpace project management - Organization and conduct of reviews49.140Vesoljski sistemi in operacijeSpace systems and operationsICS:Ta slovenski standard je istoveten z:EN 14093:2002SIST EN 14093:2004en01-maj-2004SIST EN 14093:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14093February 2002ICS 49.140English versionSpace project management - Organization and conduct ofreviewsManagement des projets spatiaux - Organisation etconduite de revuesRaumfahrtprojektmanagement - Organisation undDurchführung von ReviewsThis European Standard was approved by CEN on 22 December 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14093:2002 ESIST EN 14093:2004

Review tools.20A.1General.20A.2Template for review plan.20A.3Supporting documentation.21A.3.1General.21A.3.2Mission definition review.21A.3.3Preliminary requirements review.22A.3.4System requirements review.22A.3.5Preliminary design review.22A.3.6Critical design review.22A.3.7Qualification review.23A.3.8Acceptance review.23A.3.9Flight readiness review.23A.3.10Operational readiness review.24A.3.11Launch readiness review.24A.3.12Flight qualification review.24A.3.13End-of-life review.24A.4Review item discrepancy (RID).24 FiguresFigure 1 — Schematic presentation of interfaces and interactions between review participants.13Figure 2 — Logic diagram for RID processing.18 TablesTable 1 — Stage of achievement versus review reference - Progressive definition of requirements.9Table 2 — Stage of achievement versus review reference - Progressive verification.10Table 3 — Stage of achievement versus review reference - Progressive readiness and utilization.11SIST EN 14093:2004

1 ECSS-M-30-01ASIST EN 14093:2004
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 16091:2002(Main)
Space systems - Integrated logistic support (ISO 16091:2002)
SIST EN ISO 16091:2004

ISO 16091:2002 describes the set of management requirements needed to identify and provide logistic support, so the customer can operate and maintain a product in its operational environment for the expected lifetime.
These requirements also aim, throughout the product life cycle, at implementing everything pertinent to the control of the risks considered as critical regarding the operational objectives.
The management requirements are applicable to those activities necessary to design, develop, deliver, deploy and manage an organized and structured set of materials and software, services, processes and information dedicated to support the system throughout its life cycle.
ISO 16091:2002 specifies management, studies, production activities, information management processes and tasks to meet the customer's need for logistic support.
When viewed from the perspective of a specific programme or project context, the requirements defined in ISO 16091:2002 should be tailored to match the genuine requirements of a particular profile and circumstances of a programme or project.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN ISO 17666(Main)
Space systems - Risk management (ISO/DIS 17666:2015)
oSIST prEN ISO 17666:2016
  • Draft
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16603-20-40:2023(Main)
Space engineering - ASIC, FPGA and IP Core engineering
SIST EN 16603-20-40:2024

This activity w ill be the parallel development of EN 16603-20-40 and ECSS-E-ST-20-40C.
The scope shall cover the areas of existing ASIC and FPGA engineering chapter 5 of ECSS-Q-ST-60-02C, but w ith w ider breadth and greater depth, covering engineering requirements of end-to-end development flow s, from specification of requirements to validation of prototypes, of the follow ing monolithic devices for its use in space:
• ASICs (distinguishing digital, analogue and mixed-signal development flow s)
• FPGAs (distinguishing three technology families: SRAM, FLASH and anti-fuse technologies)
• ASIC and FPGA System-on-Chip embedding processor cores w hich have external “softw are programme” dependencies to be addressed during the SoC development, resulting in SW-HW co-design requirements.

  • Standard
    139 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16604-10:2023(Main)
Space sustainability - Space debris mitigation requirements (ISO 24113:2023, modified)
SIST EN 16604-10:2024

This document defines the primary space debris mitigation requirements applicable to all elements of unmanned systems launched into, or passing through, near-Earth space, including launch vehicle orbital stages, operating spacecraft and any objects released as part of normal operations.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16603-20:2023(Main)
Space engineering - Electrical and electronic
SIST EN 16603-20:2024

Scope remains unchanged.
This Standard establishes the basic rules and general principles applicable to the electrical, electronic, electromagnetic, microwave and engineering processes. It specifies the tasks of these engineering processes and the basic performance and design requirements in each discipline.
It defines the terminology for the activities within these areas.
It defines the specific requirements for electrical subsystems and payloads, deriving from the system engineering requirements laid out in EN 16603-10 (equivalent of ECSS-E-ST-10 "Space engineering - System engineering general requirements".)

  • Standard
    135 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16603-20-08:2023(Main)
Space engineering - Photovoltaic assemblies and components
SIST EN 16603-20-08:2023

This Standard specifies the general requirements for the qualification, procurement, storage and delivery of photovoltaic assemblies, solar cell assemblies, bare solar cells, coverglasses and protection diodes suitable for space applications.
This standard does not cover the particular qualification requirements for a specific mission.
This Standard primarily applies to qualification approval for photovoltaic assemblies, solar cell assemblies, bare solar cells, coverglasses and protection diodes, and to the procurement of these items.
This standard is limited to crystaline Silicon and single and multi-junction GaAs solar cells with a thickness of more than 50 m and does not include thin film solar cell technologies and poly-crystaline solar cells.
This Standard does not cover the concentration technology, and especially the requirements related to the optical components of a concentrator (e.g. reflector and lens) and their verification (e.g. collimated light source).
This Standard does not apply to qualification of the solar array subsystem, solar panels, structure and solar array mechanisms.

  • Standard
    230 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16602-60:2023(Main)
Space product assurance - Electrical, electronic and electromechanical (EEE) components
SIST EN 16602-60:2023

The Scope of the Standard remains unchanged.
This standard defines the requirements for selection, control, procurement and usage of EEE components for space projects.
This standard differentiates between three classes of components through three different sets of standardization requirements (clauses) to be met.
The three classes provide for three levels of trade-off between assurance and risk. The highest assurance and lowest risk is provided by class 1 and the lowest assurance and highest risk by class 3. Procurement costs are typically highest for class 1 and lowest for class 3. Mitigation and other engineering measures may decrease the total cost of ownership differences between the three classes. The project objectives, definition and constraints determine which class or classes of components are appropriate to be utilised within the system and subsystems.
a.   Class 1 components are described in Clause 4.
b.   Class 2 components are described in Clause 5
c.   Class 3 components are described in Clause 6.
The requirements of this document apply to all parties involved at all levels in the integration of EEE components into space segment hardware and launchers.

  • Standard
    103 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16602-70-40:2023(Main)
Space product assurance - Processing and quality assurance requirements for hard brazing of metallic materials for flight hardware
SIST EN 16602-70-40:2023

2021-04-21: This EN is based on ECSS-Q-ST-70-40C

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16602-60-13:2023(Main)
Space product assurance - Commercial electrical, electronic and electromechanical (EEE) components
SIST EN 16602-60-13:2023

2021-04-21: This EN is based on ECSS-Q-ST-60-13C Rev.1

  • Standard
    106 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16602-70-61:2022(Main)
Space product assurance - High-reliability soldering for surface mount, mixed technology and hand-mounted electrical connections
SIST EN 16602-70-61:2022

This standard defines:
- the basic requirements for the verification and approval of automatic machine w ave soldering for use in spacecraft hardware. The process requirements for w ave soldering of doublesided and multilayer boards are also defined.
- the technical requirements and quality assurance provisions for the manufacture and verification of manuallysoldered, high-reliability electrical connections.
- the technical requirements and quality assurance provisions for the manufacture and verification of high-reliability electronic circuits based on surface mounted device (SMD) and mixed technology.
- the acceptance and rejection criteria for high reliability manufacture of manually-soldered electrical connections intended to w ithstand normal terrestrial conditions and the vibrational g-loads and environment imposed by space flight.
- the proper tools, correct materials, design and w orkmanshipt. Workmanship standards are included to permit discrimination betw een proper and improper work.
SCOPE
This Standard defines the technical requirements and quality assurance provisions for the manufacture and verification of high-reliability electronic circuits of surface mount, through hole and solderless assemblies.
The Standard defines w orkmanship requirements, the acceptance and rejection criteria for high-reliability assemblies intended to withstand normal terrestrial conditions and the environment imposed by space flight.
The mounting and supporting of components, terminals and conductors specified in this standard applies only to assemblies designed to continuously operate over the mission w ithin the temperature limits of -55 °C to +85 °C at solder joint level.
Requirements related to printed circuit boards are contained in ECSS-Q-ST-70-60 (equivalent to EN 16602-70-60) and ECSS-Q-ST-70-12 (equivalent to EN 16602-70-12).
This Standard does not cover the qualification and acceptance of the EQM and FM equipment w ith high-reliability electronic circuits of surface mount, through hole and solderless assemblies.
This Standard does not cover verification of thermal properties for component assembly.
This Standard does not cover pressfit connectors.
The qualification and acceptance tests of equipment manufactured in accordance w ith this Standard are covered by ECSS-EST-10-03 (equivalent to EN 16603-10-03).

  • Standard
    253 pages
    English language
    sale 10% off
    e-Library read for
    1 day