iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 1793-2:1997

(Main)

Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 2: Intrinsic characteristics of airborne sound insulation

Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 2: Intrinsic characteristics of airborne sound insulation

This part of prEN 1973 specifies the laboratory method for measuring the airborne sound insulation performance of roadside noise barriers. It covers assessment of the intrinsic performance of barriers which can reasonably be assembled inside the testing facility described in EN ISO 140-3.

Lärmschutzeinrichtungen an Straßen - Prüfverfahren zur Bestimmung der akustischen Eigenschaften - Teil 2: Produktspezifische Merkmale der Luftschalldämmung

Dieser Teil der prEN 1793 legt das Laborprüfverfahren zur Ermittlung der Luftschalldämm-Eigenschaften von Lärmschutzwänden an Straßen fest. Er ist bei der Beurteilung der produktspezifischen Eigenschaften derjenigen Lärmsschutzeinrichtungen an Straßen anzuwenden, die für den Einbau in die EN ISO 140-3 beschrieben Prüfeinrichtung geeignet sind.

Dispositifs de réduction du bruit du trafic routier - Méthode d'essai pour la détermination de la performance acoustique - Partie 2: Caractéristiques intrinsèques relatives à l'isolation aux bruits aériens

La présente partie du prEN 1793 spécifie une méthode de laboratoire permettant de mesurer la performance d'isolation aux bruits aériens des écrans antibruit routiers. Elle traite de l'évaluation de la performance intrinsèque des écrans antibruit qui peuvent raisonnablement être assemblés à l'intérieur de l'installation d'essai décrite dans l'EN ISO 140-3.

Protihrupne ovire za cestni promet – Preskusna metoda za ugotavljanje akustičnih lastnosti - 2. del: Karakteristike, značilne za izolacijo pred zvokom v zraku

General Information

Status
Withdrawn
Publication Date
16-Sep-1997
Withdrawal Date
13-Nov-2012
ICS
17.140.30 - Noise emitted by means of transport
93.080.30 - Road equipment and installations
Technical Committee
CEN/TC 226 - Road equipment
Drafting Committee
CEN/TC 226/WG 6 - Noise reducing devices
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
14-Nov-2012
Completion Date
14-Nov-2012
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
89/106/EEC - Construction products
Mandate
M/111 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on circulation fixtures
Ref Project
SIST EN 1793-2:1999 - Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 2: Intrinsic characteristics of airborne sound insulation

Relations

Replaced By
EN 1793-2:2012 - Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 2: Intrinsic characteristics of airborne sound insulation under diffuse sound field conditions
Effective Date
08-Jun-2022
Parent
EN 1793-1:1997 - Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 1: Intrinsic characteristics of sound absorption
Effective Date
22-Dec-2008

Buy Standard

EN 1793-2:1999EN 1793-2:1999
PreviousNext
Standard
EN 1793-2:1999
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Lärmschutzeinrichtungen an Straßen - Prüfverfahren zur Bestimmung der akustischen Eigenschaften - Teil 2: Produktspezifische Merkmale der LuftschalldämmungDispositifs de réduction du bruit du trafic routier - Méthode d'essai pour la détermination de la performance acoustique - Partie 2: Caractéristiques intrinseques relatives a l'isolation aux bruits aériensRoad traffic noise reducing devices - Test method for determining the acoustic performance - Part 2
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
CEN/TS 17812:2022(Main)
Determination of the acoustic properties of markings - The CPX measurement method
SIST-TS CEN/TS 17812:2022

This document outlines a method to measure the typical external noise emission produced when tyres of passenger car roll over a structured road marking. The result is a measure for the noise perceived in the surroundings of the road, hence not for interior noise in the car.
This method can be used for three purposes:
- determination of initial acoustic properties of a road marking, yielding a noise label for a given system;
- testing of the acoustic conformity of a particular marking to the noise label determined during the determination of initial acoustic properties;
- monitoring of the acoustic properties in the course of its lifetime.
The test result allows the road owner to make an assessment of the risk of nuisance when s/he considers a particular road marking system for application on a road in a noise sensitive area, e.g. built up areas. The method is also applicable to measurements on milled rumble strips.

  • Technical specification
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1793-6:2018+A1:2021(Main)
Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 6: Intrinsic characteristics - In situ values of airborne sound insulation under direct sound field conditions
SIST EN 1793-6:2018+A1:2021

This document describes a test method for measuring a quantity representative of the intrinsic characteristics of airborne sound insulation for traffic noise reducing devices: the sound insulation index.
The test method is intended for the following applications:
-   determination of the intrinsic characteristics of airborne sound insulation of noise reducing devices to be installed along roads, to be measured either in situ or in laboratory conditions;
-   determination of the in situ intrinsic characteristics of airborne sound insulation of noise reducing devices in actual use;
-   comparison of design specifications with actual performance data after the completion of the construction work;
-   verification of the long term performance of noise reducing devices (with a repeated application of the method);
-   interactive design process of new products, including the formulation of installation manuals.
The test method is not intended for the determination of the intrinsic characteristics of airborne sound insulation of noise reducing devices to be installed in reverberant conditions, e.g. inside tunnels or deep trenches or under covers.
Results are expressed as a function of frequency in one-third octave bands, where possible, between 100 Hz and 5 kHz. If it is not possible to get valid measurement results over the whole frequency range indicated, the results will be given in a restricted frequency range and the reasons for the restriction(s) will be clearly reported.

  • Standard
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1793-5:2016/AC:2018(Corrigendum)
Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 5: Intrinsic characteristics - In situ values of sound reflection under direct sound field conditions
SIST EN 1793-5:2016/AC:2018

TC - Modification to Formula (4) in all three language versions.

  • Corrigendum
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1793-2:2018(Main)
Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 2: Intrinsic characteristics of airborne sound insulation under diffuse sound field conditions
SIST EN 1793-2:2018

This document specifies the laboratory method for measuring the airborne sound insulation performance of road traffic noise reducing devices in reverberant conditions. It covers the assessment of the intrinsic performance of barriers that can reasonably be assembled inside the testing facility described in EN ISO 10140-2 and EN ISO 10140-4.
This method is not intended for the determination of the intrinsic characteristics of airborne sound insulation of noise reducing devices to be installed on roads in non-reverberant conditions.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1793-1:2017(Main)
Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 1: Intrinsic characteristics of sound absorption under diffuse sound field conditions
SIST EN 1793-1:2017

This European Standard specifies the laboratory method for measuring the sound absorption performance of road traffic noise reducing devices in reverberant conditions. It covers the assessment of the intrinsic sound absorption performance of devices that can reasonably be assembled inside the testing facility described in EN ISO 354.
This method is not intended for the determination of the intrinsic characteristics of sound absorption of noise reducing devices to be installed on roads in non-reverberant conditions.
The test method in EN ISO 354 referred to in this European Standard excludes devices that act as weakly damped resonators. Some devices will depart significantly from these requirements and in these cases, care is needed in interpreting the results.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1793-5:2016(Main)
Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 5: Intrinsic characteristics - In situ values of sound reflection under direct sound field conditions
SIST EN 1793-5:2016

This European Standard describes a test method for measuring a quantity representative of the intrinsic characteristics of sound reflection from road noise reducing devices: the reflection index.
The test method is intended for the following applications:
- determination of the intrinsic characteristics of sound reflection of noise reducing devices to be installed along roads, to be measured either on typical installations alongside roads or on a relevant sample section;
- determination of the in situ intrinsic characteristics of sound reflection of noise reducing devices in actual use;
- comparison of design specifications with actual performance data after the completion of the construction work;
- verification of the long-term performance of noise reducing devices (with a repeated application of the method).
The test method is not intended for the following applications:
- determination of the intrinsic characteristics of sound reflection of noise reducing devices to be installed in reverberant conditions, e.g. inside tunnels or deep trenches.
Results are expressed as a function of frequency, in one-third octave bands between 100 Hz and 5 kHz. If it is not possible to get valid measurements results over the whole frequency range indicated, the results shall be given in a restricted frequency range and the reasons of the restriction(s) shall be clearly reported.

  • Standard
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1793-4:2015(Main)
Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 4: Intrinsic characteristics - In situ values of sound diffraction
SIST EN 1793-4:2015

This European Standard describes a test method for determining the intrinsic characteristics of sound diffraction of added devices installed on the top of traffic noise reducing devices. The test method prescribes measurements of the sound pressure level at several reference points near the top edge of a noise reducing device with and without the added device installed on its top. The effectiveness of the added device is calculated as the difference between the measured values with and without the added devices, correcting for any change in height (the method described gives the acoustic benefit over a simple barrier of the same height; however, in practice the added device can raise the height and this could provide additional screening depending on the source and receiver positions).
The test method is intended for the following applications:
•   preliminary qualification, outdoors or indoors, of added devices to be installed on noise reducing devices;
•   determination of sound diffraction index difference of added devices in actual use;
•   comparison of design specifications with actual performance data after the completion of the construction work;
•   verification of the long term performance of added devices (with a repeated application of the method);
•   interactive design process of new products, including the formulation of installation manuals.
The test method can be applied both in situ and on samples purposely built to be tested using the method described here.
Results are expressed as a function of frequency, in one-third octave bands between 100 Hz and 5 kHz. If it is not possible to get valid measurements results over the whole frequency range indicated, the results shall be given in the restricted frequency range and the reasons of the restriction(s) shall be clearly reported. A single-number rating is calculated from frequency data.
For indoors measurements see Annex A.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1793-3:1997(Main)
Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 3: Normalized traffic noise spectrum
SIST EN 1793-3:1999

This part of prEN 1793 gives a normalized traffic noise spectrum for the evaluation and assessment of the acoustic performance of devices designed to reduce traffic noise near roads.

  • Standard
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 1793-6(Main)
Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 6: Intrinsic characteristics - In situ values of airborne sound insulation under direct sound field conditions
oSIST prEN 1793-6:2023

This document describes a test method for measuring a quantity representative of the intrinsic characteristics of airborne sound insulation for traffic noise reducing devices: the sound insulation index.
The test method is intended for the following applications:
-   determination of the intrinsic characteristics of airborne sound insulation of noise reducing devices to be installed along roads, to be measured either in situ or in laboratory conditions;
-   determination of the in situ intrinsic characteristics of airborne sound insulation of noise reducing devices in actual use;
-   comparison of design specifications with actual performance data after the completion of the construction work;
-   verification of the long term performance of noise reducing devices (with a repeated application of the method);
-   interactive design process of new products, including the formulation of installation manuals.
The test method is not intended for the determination of the intrinsic characteristics of airborne sound insulation of noise reducing devices to be installed in reverberant conditions, e.g. inside tunnels or deep trenches or under covers.
Results are expressed as a function of frequency in one-third octave bands, where possible, between 100 Hz and 5 kHz. If it is not possible to get valid measurement results over the whole frequency range indicated, the results will be given in a restricted frequency range and the reasons for the restriction(s) will be clearly reported.

  • Draft
    61 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 1793-1(Main)
Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 1: Intrinsic characteristics of sound absorption under diffuse sound field conditions
oSIST prEN 1793-1:2023

This European Standard specifies the laboratory method for measuring the sound absorption performance of road traffic noise reducing devices in reverberant conditions. It covers the assessment of the intrinsic sound absorption performance of devices that can reasonably be assembled inside the testing facility described in EN ISO 354.
This method is not intended for the determination of the intrinsic characteristics of sound absorption of noise reducing devices to be installed on roads in non-reverberant conditions.
The test method in EN ISO 354 referred to in this European Standard excludes devices that act as weakly damped resonators. Some devices will depart significantly from these requirements and in these cases, care is needed in interpreting the results.

  • Draft
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day