EN 1873:2014/FprA1:2015
(Amendment)Prefabricated accessories for roofing - Individual rooflights of plastics - Product specification and test methods
Prefabricated accessories for roofing - Individual rooflights of plastics - Product specification and test methods
This European Standard specifies requirements for rooflights made of plastic materials (e.g. GF-UP, PC, PMMA, PVC) and rooflights with upstands made of e.g. GF-UP, PVC, steel, aluminium or wood for installation in roofs. These rooflights serve the purpose of introducing daylight.
This European Standard applies to rooflights with a rectangular or circular ground plan (see Figures 1 and 2), with an opening span (width) or diameter not larger than 2,5 m and an opening length not larger than 3,0 m in roof pitches up to 25°. This document does not cover rooflights which contribute to the load-bearing or stiffness of the roof itself.
This European Standard applies to rooflights and rooflights with upstand, where a single manufacturer provides all components of the rooflight with upstand, which are bought in a single purchase.
This European Standard applies to rooflights with one or several translucent parts.
Rooflights may be opened by means of opening devices in one or more parts for ventilation.
The possible additional functions of day to day ventilation, smoke and heat ventilation e.g. in case of fire in accordance with EN 12101 2, roof access, and/ or slinging point e.g. in accordance with EN 795 are outside the scope of this document.
This European Standard does not include calculations with regard to construction, design requirements and installation techniques.
NOTE Guidelines for safety, application, use and maintenance of individual rooflights are presented in Annex A.
Vorgefertigte Zubehörteile für Dachdeckungen - Lichtkuppeln aus Kunststoff - Produktspezifikation und Prüfverfahren
Accessoires préfabriqués pour couverture - Lanterneaux ponctuels en matière plastique - Spécifications des produits et méthodes d'essais
Predizdelani dodatki za ostrešja - Plastični svetlobniki - Specifikacija izdelka in preskusne metode
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-oktober-2015
3UHGL]GHODQLGRGDWNL]DRVWUHãMD3ODVWLþQLVYHWOREQLNL6SHFLILNDFLMDL]GHONDLQ
SUHVNXVQHPHWRGH
Prefabricated accessories for roofing - Individual rooflights of plastics - Product
specification and test methods
Vorgefertigte Zubehörteile für Dachdeckungen - Lichtkuppeln aus Kunststoff -
Produktspezifikation und Prüfverfahren
Accessoires préfabriqués pour couverture - Lanterneaux ponctuels en matière plastique -
Spécifications des produits et méthodes d'essais
Ta slovenski standard je istoveten z: EN 1873:2014/FprA1:2015
ICS:
91.060.20 Strehe Roofs
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
FINAL DRAFT
EN 1873:2014
NORME EUROPÉENNE
EUROPÄISCHE NORM
FprA1
August 2015
ICS 91.060.20
English Version
Prefabricated accessories for roofing - Individual rooflights of
plastics - Product specification and test methods
Accessoires préfabriqués pour couverture - Lanterneaux Vorgefertigte Zubehörteile für Dachdeckungen -
ponctuels en matière plastique - Spécifications des produits Lichtkuppeln aus Kunststoff - Produktspezifikation und
et méthodes d'essais Prüfverfahren
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 128.
This draft amendment A1, if approved, will modify the European Standard EN 1873:2014. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has
the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 1873:2014/FprA1:2015:2015 E
worldwide for CEN national Members.
Contents
Page
Foreword .3
1 Modification to Annex D "Determ
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.