EN ISO 13567-1:2002
(Main)Technical product documentation - Organization and naming of layers for CAD - Part 1: Overview and principles (ISO 13567-1:1998)
Technical product documentation - Organization and naming of layers for CAD - Part 1: Overview and principles (ISO 13567-1:1998)
Technische Produktdokumentation - Gliederung und Benennung von Layern für CAD - Teil 1: Übersicht und Grundlagen (ISO 13567-1:1998)
Dieser Teil von ISO 13567 legt allgemeine Grundlagen der Strukturierung von Layern in CAD-Dateien fest. Layer dienen zur Steuerung der Übersichtlichkeit, Verwaltung und Übertragung von CAD-Datei-Daten. Die Namen der Layer dienen der Darstellung dieser Struktur.
Die Empfehlungen gelten für alle Bereiche, die an der Vorbereitung und Anwendung von technischen Dokumenten auf Computersystemen beteiligt sind. Obwohl diese Grundlagen primär für Anwender vorgesehen sind, wird von CAD-System-Entwicklern erwartet, dass sie Software-Werkzeuge, die zur Implementierung und Unterstützung dieses Teiles der ISO 13567 fähig sind, bereitstellen. Ein weiterer wichtiger Anwendungsbereich ist die Struktur von Daten in Teilbibliotheken, die von Dritten produziert werden.
Documentation technique de produits - Organisation et dénomination des couches de CAO - Partie 1: Vue d'ensemble et principes (ISO 13567-1:1998)
La présente partie de l'ISO 13567 établit les principes généraux de la structuration en couches au sein des fichers de CAO. Les couches sont utilisées dans le but de contrôler la visibilité, de gérer et de communiquer les données d'un fichier de CAO. Les noms des couches sont utilisés pour représenter cette structure. Ces recommandations sont applicables à toutes les parties impliquées dans la préparation et l'utilisation de documentation technique sur ordinateur. Bien que ces recommandations soient essentiellement destinées aux utilisateurs, les développeurs de système de CAO sont supposés fournir des outils logiciels capables d'implanter et de supporter la présente partie de l'ISO 13567. Une autre utilisation importante est la structuration des données dans des bibliothèques de composants produites par des tiers.
Tehnična dokumentacija izdelkov - Organizacija in poimenovanje plasti pri računalniškem projektiranju (CAD) - 1. del: Pregled in načela (ISO 13567-1:1998)
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Technische Produktdokumentation - Gliederung und Benennung von Layern für CAD - Teil 1: Übersicht und Grundlagen (ISO 13567-1:1998)Documentation technique de produits - Organisation et dénomination des couches de CAO - Partie 1: Vue d'ensemble et principes (ISO 13567-1:1998)Technical product documentation - Organization and naming of layers for CAD - Part 1: Overview and principles (ISO 13567-1:1998)35.240.10Computer-aided design (CAD)01.110L]GHONHTechnical product documentationICS:Ta slovenski standard je istoveten z:EN ISO 13567-1:2002SIST EN ISO 13567-1:2003en01-april-2003SIST EN ISO 13567-1:2003SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN ISO 13567-1January 2002ICS 01.110; 35.240.10English versionTechnical product documentation - Organization and naming oflayers for CAD - Part 1: Overview and principles (ISO 13567-1:1998)Documentation technique de produits - Organisation etdénomination des couches de CAO - Partie 1: Vued'ensemble et principes (ISO 13567-1:1998)Technische Produktdokumentation - Gliederung undBenennung von Layern für CAD - Teil 1: Übersicht undGrundlagen (ISO 13567-1:1998)This European Standard was approved by CEN on 27 December 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN ISO 13567-1:2002 ESIST EN ISO 13567-1:2003
2002-03-27ForewordThe text of the International Standard from Technical Committee ISO/TC 10 "Technicaldrawings, product definition and related documentation" of the International Organization forStandardization (ISO) has been taken over as a European Standard by CMC.This European Standard shall be given the status of a national standard, either by publication ofan identical text or by endorsement, at the latest by July 2002, and conflicting national standardsshall be withdrawn at the latest by July 2002.According to the CEN/CENELEC Internal Regulations, the national standards organizations ofthe following countries are bound to implement this European Standard: Austria, Belgium, CzechRepublic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg,Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom.Endorsement noticeThe text of the International Standard ISO 13567-1:1998 has been approved by CEN as aEuropean Standard without any modifications.SIST EN ISO 13567-1:2003
AReference numberISO 13567-1:1998(E)INTERNATIONALSTANDARDISO13567-1First edition1998-03-01Technical product documentation —Organization and naming of layers forCAD —Part 1:Overview and principlesDocumentation technique de produits — Organisation et dénominationdes couches de CAO —Partie 1: Vue d'ensemble et principesSIST EN ISO 13567-1:2003
ISO 13567-1:1998(E)©
ISO 1998All rights reserved. Unless otherwise specified, no part of this publication may be reproducedor utilized in any form or by any means, electronic or mechanical, including photocopying andmicrofilm, without permission in writing from the publisher.International Organization for StandardizationCase postale 56 · CH-1211 Genève 20 · SwitzerlandInternetcentral@iso.chX.400c=ch; a=400net; p=iso; o=isocs; s=centralPrinted in SwitzerlandiiForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISOmember bodies). The work of preparing International Standards is normally carried out through ISO technicalcommittees. Each member body interested in a subject for which a technical committee has been established hasthe right to be represented on that committee. International organizations, governmental and non-governmental, inliaison with ISO, also take part in the work. ISO collaborates closely with the International ElectrotechnicalCommission (IEC) on all matters of electrotechnical standardization.Draft International Standards adopted by the technical committees are circulated to the member bodies for voting.Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.International Standard ISO 13567-1 was prepared by Technical Committee ISO/TC 10, Technical drawings, productdefinition and related documentation, Subcommittee SC 8, Construction documentation.ISO 13567 consists of the following parts, under the general title Technical product documentation — Organizationand naming of layers for CAD:—Part 1: Overview and principles—Part 2: Concepts, format and codes used in construction documentation—Part 3: [under study]Annex A of this part of ISO 13567 is for information only.SIST EN ISO 13567-1:2003
© ISOISO 13567-1:1998(E)iiiIntroductionISO 13567 consists of three parts which deal with CAD layer organization and naming. ISO 13567-1 has a generalapplication whereas ISO 13567-2 and ISO 13567-3 (under study) are applicable to construction projects.The purpose of ISO 13567 is to establish a common international basis for organizing data in CAD systems thatcovers the structuring of data into layers.SIST EN ISO 13567-1:2003
INTERNATIONAL STANDARD
© ISOISO 13567-1:1998(E)1Technical product documentation — Organization and naming oflayers for CAD —Part 1:Overview and principles1 ScopeThis part of ISO 13567 establishes the general principles of layer struct
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.