EN ISO 16946:2015
(Main)Non-destructive testing - Ultrasonic testing - Specification for step wedge calibration block (ISO 16946:2015)
Non-destructive testing - Ultrasonic testing - Specification for step wedge calibration block (ISO 16946:2015)
ISO 16946:2015 specifies the dimensions, material, and manufacture of a step wedge steel block for the calibration of ultrasonic instruments.
Zerstörungsfreie Prüfung - Ultraschallprüfung - Beschreibung des Stufenkeil-Kalibrierkörpers (ISO 16946:2015)
Diese Internationale Norm legt die Maße, den Werkstoff und die Herstellung eines Stufenkeil-Kalibrierkörpers für die Kalibrierung von Ultraschallprüfgeräten fest.
Essais non destructifs - Essais par ultrasons - Spécifications relatives aux blocs d'étalonnage à gradins (ISO 16946:2015)
L'ISO 16946:2015 spécifie les dimensions, le matériau constitutif et la fabrication des blocs à gradins en acier pour l'étalonnage des appareils de contrôle par ultrasons.
Neporušitveno preskušanje - Ultrazvočne preiskave - Specifikacija za kalibracijo stopničastega klinastega bloka (ISO 16946:2015)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-julij-2015
1HSRUXãLWYHQRSUHVNXãDQMH8OWUD]YRþQHSUHLVNDYH6SHFLILNDFLMD]DNDOLEUDFLMR
VWRSQLþDVWHJDNOLQDVWHJDEORND ,62
Non-destructive testing - Ultrasonic testing - Specification for step wedge calibration
block (ISO 16946:2015)
Zerstörungsfreie Prüfung - Ultraschallprüfung - Beschreibung des Stufenkeil-
Kalibrierkörpers (ISO 16946:2015)
Essais non destructifs - Essais par ultrasons - Spécifications relatives aux blocs
d'étalonnage à gradins (ISO 16946:2015)
Ta slovenski standard je istoveten z: EN ISO 16946:2015
ICS:
19.100 Neporušitveno preskušanje Non-destructive testing
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 16946
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2015
ICS 19.100
English Version
Non-destructive testing - Ultrasonic testing - Specification for
step wedge calibration block (ISO 16946:2015)
Essais non destructifs - Essais par ultrasons - Zerstörungsfreie Prüfung - Ultraschallprüfung -
Spécifications relatives aux blocs d'étalonnage à gradins Beschreibung des Stufenkeil-Kalibrierkörpers (ISO
(ISO 16946:2015) 16946:2015)
This European Standard was approved by CEN on 7 February 2015.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 16946:2015 E
worldwide for CEN national Members.
Contents Page
Foreword .3
Foreword
This document (EN ISO 16946:2015) has been prepared by Technical Committee CEN/TC 138
“Non-destructive testing” the secretariat of which is held by AFNOR, in collaboration with Technical Committee
ISO/TC 135 “Non-destructive testing”.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by October 2015, and conflicting national standards shall be withdrawn at
the latest by October 2015.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 16946:2015 has been approved by CEN as EN ISO 16946:2015 without any modification.
INTERNATIONAL ISO
STANDARD 16946
First edition
2015-04-15
Non-destructive testing — Ultrasonic
testing — Specification for step wedge
calibration block
Essais non destructifs — Essais par ultrasons — Spécifications
relatives aux blocs d’étalonnage à gradins
Reference number
ISO 16946:2015(E)
©
ISO 2015
ISO 16946:2015(E)
© ISO 2015
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2015 – All rights reserved
ISO 16946:2015(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Dimensions . 1
5 Alternative dimensions . 2
6 Material . 2
7 Preparation . 2
8 Marking . 3
9 Declaration of conformity .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.