EN 9133:2004
(Main)Aerospace series - Quality management systems - Qualification procedure for aerospace standard parts
Aerospace series - Quality management systems - Qualification procedure for aerospace standard parts
This document provides a basic uniform method for ensuring that aerospace standard parts (products) conform with the requirements of technical specifications referring to qualified parts and for a manufacturer of such parts to have a qualified management system at least equivalent to EN 9100.
EN 9100 and EN 9103 apply when called out in the aerospace standard part standard.
Luft- und Raumfahrt - Qualitätsmanagementsystem - Qualifizierungsverfahren für genormte Teile der Luft- und Raumfahrt
Dieses Dokument liefert eine grundlegende einheitliche Methode, mit der sichergestellt werden kann, dass Normteile für Luft- und Raumfahrt mit den Anforderungen der technischer Spezifikationen, die sich auf quali¬fizierte Teile beziehen, übereinstimmen, und dass die Hersteller dieser Teile über ein qualifiziertes Qualitätsmanagementsystem verfügen, das zumindest der EN 9100 gleichkommt.
EN 9100 und EN 9103 kommen dann zur Anwendung, wenn dies in der Norm über Normteile für die Luft- und Raumfahrt ausgewiesen ist.
Série aérospatiale - Systèmes de management de la qualité - Procédure de qualification pour pièces aérospatiales normalisées
Le présent document fournit une méthode de base uniforme pour assurer que les pièces aérospatiales
normalisées (produits) satisfont aux exigences des spécifications techniques relatives à la qualification des
pièces et pour un fabricant de telles pièces de disposer d�un système de management qualifié au moins
équivalent à EN 9100.
Les EN 9100 et EN 9103 s�appliquent lorsqu�elles sont citées dans la norme relative aux pièces aérospatiales
normalisées.
Aeronavtika - Sistemi vodenja kakovosti - Postopek za razvrščanje standardiziranih delov v aeronavtiki
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 9133:2005
01-april-2005
$HURQDYWLND6LVWHPLYRGHQMDNDNRYRVWL3RVWRSHN]DUD]YUãþDQMH
VWDQGDUGL]LUDQLKGHORYYDHURQDYWLNL
Aerospace series - Quality management systems - Qualification procedure for aerospace
standard parts
Luft- und Raumfahrt - Qualitätsmanagementsystem - Qualifikationsverfahren für
genormte Teile der Luft- und Raumfahrt
Série aérospatiale - Systemes de management de la qualité - Procédure de qualification
pour pieces aérospatiales normalisées
Ta slovenski standard je istoveten z: EN 9133:2004
ICS:
03.120.10 Vodenje in zagotavljanje Quality management and
kakovosti quality assurance
49.020 Letala in vesoljska vozila na Aircraft and space vehicles in
splošno general
SIST EN 9133:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 9133:2005
---------------------- Page: 2 ----------------------
SIST EN 9133:2005
EUROPEAN STANDARD
EN 9133
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2004
ICS 49.020; 03.120.10 Supersedes EN 3042:1991
English version
Aerospace series - Quality management systems - Qualification
procedure for aerospace standard parts
Série aérospatiale - Systèmes de management de la Luft- und Raumfahrt - Qualitätsmanagementsystem -
qualité - Procédure de qualification pour pièces Qualifikationsverfahren für genormte Teile der Luft- und
aérospatiales normalisées Raumfahrt
This European Standard was approved by CEN on 4 June 2004.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2004 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 9133:2004: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 9133:2005
EN 9133:2004 (E)
Contents Page
Foreword.3
1 Scope .4
2 Normative references .4
3 Terms, definitions and abbreviated terms .4
4 Application process .5
5 Qualification procedure .5
6 Certification procedure .6
7 Maintenance .7
2
---------------------- Page: 4 ----------------------
SIST EN 9133:2005
EN 9133:2004 (E)
Foreword
This document (EN 9133:2004) has been prepared by the European Association of Aerospace Manufacturers
– Standardization (AECMA-STAN).
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by May 2005, and conflicting national standards shall be withdrawn at the
latest by May 2005.
This document supersedes EN 3042:1991.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic,
Denmark, Estonia, Finland, France, Germany,
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.