EN ISO 28706-2:2011

Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 2: Determination of resistance to chemical corrosion by boiling acids, boiling neutral liquids and/or their vapours (ISO 28706-2:2008)

ISO 28706-2:2008 describes a test method for the determination of the resistance of flat surfaces of vitreous and porcelain enamels to boiling acids, boiling neutral liquids and/or their vapours.
The method allows the determination of the resistance of vitreous and porcelain enamels to the liquid and vapour phases of the corrosive medium simultaneously.

Emails und Emaillierungen - Bestimmung der Beständigkeit gegen chemische Korrosion - Teil 2: Bestimmung der Beständigkeit gegen chemische Korrosion durch kochende Säuren, kochende neutrale Flüssigkeiten und/oder deren Dämpfe (ISO 28706-2:2008)

Dieser Teil von ISO 28706 legt ein Prüfverfahren zur Bestimmung der Beständigkeit von ebenen Email-
Oberflächen gegen kochende Säuren, neutrale Flüssigkeiten und/oder deren Dämpfe fest.
Dieses Verfahren erlaubt die gleichzeitige Bestimmung der Beständigkeit von Emails gegen die flüssige und
dampfförmige Phase des Korrosionsmittels.

Émaux vitrifiés - Détermination de la résistance à la corrosion chimique - Partie 2: Détermination de la résistance à la corrosion chimique par des acides bouillants ou des liquides neutres bouillants, et/ou leurs vapeurs (ISO 28706-2:2008)

L'ISO 28706-2:2008 spécifie une méthode d'essai permettant de déterminer la résistance de surfaces planes en émail vitrifié à des acides bouillants, des liquides neutres bouillants, et/ou leurs vapeurs.
La présente méthode permet de déterminer simultanément la résistance des émaux vitrifiés aux phases liquide et vapeur du milieu corrosif.

Steklasti in porcelanski emajli - Ugotavljanje odpornosti proti kemični koroziji - 2. del: Ugotavljanje odpornosti proti kemični koroziji s kislinami, ki vrejo, z nevtralnimi tekočinami in/ali njihovimi parami (ISO 28706-2:2008)

Ta del ISO 28706 opisuje preskusno metodo za ugotavljanje odpornosti ploščatih površin steklastih in porcelanskih emajlov proti kislinam, ki vrejo, proti nevtralnim tekočinam, ki vrejo, in/ali njihovim param. Ta metoda omogoča istočasno ugotavljanje odpornosti steklastih in porcelanskih emajlov proti tekočim in hlapnim fazam korozivnega medija.

General Information

• Status: Withdrawn
• Publication Date: 17-May-2011
• Withdrawal Date: 14-Mar-2017
• ICS: 25.220.50 - Enamels
• Technical Committee: CEN/TC 262 - Metallic and other inorganic coatings
• Drafting Committee: CEN/TC 262 - Metallic and other inorganic coatings
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 15-Mar-2017
• Ref Project: SIST EN ISO 28706-2:2012 - Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 2: Determination of resistance to chemical corrosion by boiling acids, boiling neutral liquids and/or their vapours (ISO 28706-2:2008)

Relations

• Replaces: EN 14483-2:2004 - Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 2: Determination of resistance to chemical corrosion by boiling acids, neutral liquids and/or their vapours
• Effective Date: 21-May-2011
• Replaced By: EN ISO 28706-2:2017 - Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 2: Determination of resistance to chemical corrosion by boiling acids, boiling neutral liquids, alkaline liquids and/or their vapours (ISO 28706-2:2017)
• Effective Date: 22-Mar-2017

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 28706-2:2012
01-januar-2012
1DGRPHãþD
SIST EN 14483-2:2004
6WHNODVWLLQSRUFHODQVNLHPDMOL8JRWDYOMDQMHRGSRUQRVWLSURWLNHPLþQLNRUR]LML
GHO8JRWDYOMDQMHRGSRUQRVWLSURWLNHPLþQLNRUR]LMLVNLVOLQDPLNLYUHMR]
QHYWUDOQLPLWHNRþLQDPLLQDOLQMLKRYLPLSDUDPL,62
Vitreous and porcelain enamels - Determination of resistance to chemical corrosion -
Part 2: Determination of resistance to chemical corrosion by boiling acids, boiling neutral
liquids and/or their vapours (ISO 28706-2:2008)
Emails und Emaillierungen - Bestimmung der Beständigkeit gegen chemische Korrosion
- Teil 2: Bestimmung der Beständigkeit gegen chemische Korrosion durch kochende
Säuren, kochende neutrale Flüssigkeiten und/oder deren Dämpfe (ISO 28706-2:2008)
Émaux vitrifiés - Détermination de la résistance à la corrosion chimique - Partie 2:
Détermination de la résistance à la corrosion chimique par des acides bouillants ou des
liquides neutres bouillants, et/ou leurs vapeurs (ISO 28706-2:2008)
Ta slovenski standard je istoveten z: EN ISO 28706-2:2011
ICS:
25.220.50 Emajlne prevleke Enamels
SIST EN ISO 28706-2:2012 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 28706-2:2012

---------------------- Page: 2 ----------------------

SIST EN ISO 28706-2:2012


EUROPEAN STANDARD
EN ISO 28706-2

NORME EUROPÉENNE

EUROPÄISCHE NORM
May 2011
ICS 25.220.50 Supersedes EN 14483-2:2004
English Version
Vitreous and porcelain enamels - Determination of resistance to
chemical corrosion - Part 2: Determination of resistance to
chemical corrosion by boiling acids, boiling neutral liquids and/or
their vapours (ISO 28706-2:2008)
Émaux vitrifiés - Détermination de la résistance à la Emails und Emaillierungen - Bestimmung der Beständigkeit
corrosion chimique - Partie 2: Détermination de la gegen chemische Korrosion - Teil 2: Bestimmung der
résistance à la corrosion chimique par des acides bouillants Beständigkeit gegen chemische Korrosion durch kochende
ou des liquides neutres bouillants, et/ou leurs vapeurs (ISO Säuren, kochende neutrale Flüssigkeiten und/oder deren
28706-2:2008) Dämpfe (ISO 28706-2:2008)
This European Standard was approved by CEN on 15 April 2011.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 28706-2:2011: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 28706-2:2012
EN ISO 28706-2:2011 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 28706-2:2012
EN ISO 28706-2:2011 (E)
Foreword
The text of ISO 28706-2:2008 has been prepared by Technical Committee ISO/TC 107 “Metallic and other
inorganic coatings” of the International Organization for Standardization (ISO) and has been taken over as EN
ISO 28706-2:2011 by Technical Committee CEN/TC 262 “Metallic and other inorganic coatings” the
secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by November 2011, and conflicting national standards shall be withdrawn
at the latest by November 2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes
...