25.220.50 - Enamels

EN-ISO 8289-1 specifies two low voltage tests for detecting and locating defects that extend to the basis metal in vitreous and porcelain enamel coatings.Method A (electrical) is applicable to the rapid detection and determination of the general location of defects. Method B (optical), based on colour effects, is applicable to the more precise detection of defects and their exact locations. Both methods are commonly applied to flat surfaces. For more intricate shapes, such as undulated and/or co...view more

This document specifies two low voltage tests for detecting and locating defects that extend to the basis metal in vitreous and porcelain enamel coatings.
Method A (electrical) is applicable to the rapid detection and determination of the general location of defects. Method B (optical), based on colour effects, is applicable to the more precise detection of defects and their exact locations. Both methods are commonly applied to flat surfaces. For more intricate shapes, such as undulated and/or ...view more

This document specifies two low voltage tests for detecting and locating defects that extend to the basis metal in vitreous and porcelain enamel coatings. Method A (electrical) is applicable to the rapid detection and determination of the general location of defects. Method B (optical), based on colour effects, is applicable to the more precise detection of defects and their exact locations. Both methods are commonly applied to flat surfaces. For more intricate shapes, such as undulated and/or c...view more

This document specifies a test method for determining the resistance of vitreous and porcelain enamel coatings to abrasion by rubbing, grinding or other mechanical effects.

This document specifies the quality requirements for apparatus, components, appliances and accessories of glass-lined steel (including semi-crystallized enamel coatings) and glass-lined steel castings used for process plants. It specifies the quality requirements and the tests to be carried out by the manufacturer as well as the actions to be taken to repair defects. It is also applicable to glass-lined pumps, pump components and fittings. It does not apply to glass-lined flanged steel pipes or ...view more

This document specifies the minimum requirements and the functional characteristics of enamel coatings applied by any process, such as wet dipping, wet flow-coating, wet spraying, wet electrostatic spraying, wet electrodeposition or dry-powder electrostatic spraying, to profiled steel heat exchanger panels in regenerative heat exchangers, before and after packing in baskets. For very severe service conditions, or to obtain extended operational life, more stringent limits can be agreed between cu...view more

This document specifies the quality requirements for apparatus, components, appliances and accessories of glass-lined steel (including semi-crystallized enamel coatings) and glass-lined steel castings used for process plants. It specifies the quality requirements and the tests to be carried out by the manufacturer as well as the actions to be taken to repair defects.
It is also applicable to glass-lined pumps, pump components and fittings.
It does not apply to glass-lined flanged steel pipes o...view more

This document specifies the minimum requirements and the functional characteristics of enamel coatings applied by any process, such as wet dipping, wet flow-coating, wet spraying, wet electrostatic spraying, wet electrodeposition or dry-powder electrostatic spraying, to profiled steel heat exchanger panels in regenerative heat exchangers, before and after packing in baskets.
For very severe service conditions, or to obtain extended operational life, more stringent limits can be agreed between c...view more

This document specifies the quality requirements for apparatus, components, appliances and accessories of glass-lined steel (including semi-crystallized enamel coatings) and glass-lined steel castings used for process plants. It specifies the quality requirements and the tests to be carried out by the manufacturer as well as the actions to be taken to repair defects. It is also applicable to glass-lined pumps, pump components and fittings. It does not apply to glass-lined flanged steel pipes or ...view more

This document specifies the minimum requirements and the functional characteristics of enamel coatings applied by any process, such as wet dipping, wet flow-coating, wet spraying, wet electrostatic spraying, wet electrodeposition or dry-powder electrostatic spraying, to profiled steel heat exchanger panels in regenerative heat exchangers, before and after packing in baskets. For very severe service conditions, or to obtain extended operational life, more stringent limits can be agreed between cu...view more

This standard specifies a low-voltage test method for detecting and locating defects (pores, cracks or pop-offs) which occur in enamel coatings of corrugated and/or undulated profiles and which extend down to the metal base.

This document specifies the requirements for product quality and product testing of enamelled valves
and pressure pipe fittings for untreated and potable water supply.
It does not apply to chemical service glass-enamel and apparatus enamel.

This document specifies the requirements for product quality and product testing of enamelled valves and pressure pipe fittings for untreated and potable water supply.
It does not apply to chemical service glass-enamel and apparatus enamel.

This document specifies a low-voltage test method for detecting and locating defects (pores, cracks or pop-offs) that occur in enamel coatings of corrugated and/or undulated profiles and that extend down to the metal base.
The method is based on colour effects (optical method) and is applicable to the precise detection of defects and their exact position. It can be used for non-flat, more profiled shapes such as corrugated or undulated surfaces.
NOTE The low-voltage test is a non-destructive t...view more

This document specifies the requirements for product quality and product testing of enamelled valves and pressure pipe fittings for untreated and potable water supply. It does not apply to chemical service glass-enamel and apparatus enamel.

This document specifies a low-voltage test method for detecting and locating defects (pores, cracks or pop-offs) that occur in enamel coatings of corrugated and/or undulated profiles and that extend down to the metal base. The method is based on colour effects (optical method) and is applicable to the precise detection of defects and their exact position. It can be used for non-flat, more profiled shapes such as corrugated or undulated surfaces. NOTE The low-voltage test is a non-destructive tes...view more

ISO 4531 specifies a simulating method of test for determination of the release of metal-ions from enamelled ware, which are intended to come into contact with food (including drinks).
ISO 4531 also specifies permissible limits for the release of metal-ions from enamelled ware, which are intended to come into contact with food (including drinks).
ISO 4531 is applicable to enamelled ware, including tanks and vessels, which are intended to be used for the preparation, cooking, serving and storage ...view more

This document specifies a simulating method of test for determination of the release of metal-ions from enamelled articles, which are intended to come into contact with food.
It also specifies limits for the release of metal-ions from enamelled articles, which are intended to come into contact with food.
It is applicable to enamelled articles, including tanks and vessels, which are intended to be used for the preparation, cooking, serving and storage of food.

This document specifies a simulating method of test for determination of the release of metal-ions from enamelled articles, which are intended to come into contact with food. It also specifies limits for the release of metal-ions from enamelled articles, which are intended to come into contact with food. It is applicable to enamelled articles, including tanks and vessels, which are intended to be used for the preparation, cooking, serving and storage of food.

This document describes a test method for the determination of the resistance of vitreous and porcelain
enamelled articles to attack by alkaline liquids at temperatures between 25 °C and 95 °C. The apparatus
used is a hexagonal vessel in which six enamelled specimens or a tetragonal glass bottle in which four
enamelled specimens are simultaneously tested.
NOTE 1 The resistance to any alkaline liquid can be determined. However, the test method was originally used
for the determination of the...view more