EN ISO 16120-1:2011
(Main)Non-alloy steel wire rod for conversion to wire - Part 1: General requirements (ISO 16120-1:2011)
Non-alloy steel wire rod for conversion to wire - Part 1: General requirements (ISO 16120-1:2011)
ISO 16120:2011 is applicable to wire rod of non-alloy steel intended for wire drawing and/or cold rolling. The cross-section can be circular, oval, square, rectangular, hexagonal, octagonal, half-round or another shape, generally with at least 5 mm nominal dimension, and with a smooth surface.
ISO 16120-1:2011 covers general requirements and is not applicable to products for which standards exist or are in development, for example:
steel wire rod intended for heat treatment;
free-cutting steel wire rod;
steel wire rod for cold heading and cold extrusion;
steel wire rod intended for the production of electrodes and products for welding;
steel wire rod for welded fabric for reinforcement for concrete;
steel wire rod for ball and roller bearings (see ISO 683-17);
steel wire rod for wire for high fatigue strength mechanical springs, such as valve springs.
In addition to the requirements of ISO 16120-1:2011, the general technical delivery requirements specified in ISO 404 apply.
Walzdraht aus unlegiertem Stahl zum Ziehen - Teil 1: Allgemeine Anforderungen (ISO 16120-1:2011)
Die ISO 16120 gilt für Walzdraht aus unlegiertem Stahl zum Ziehen und/oder Kaltwalzen. Der
Querschnitt des Walzdrahtes ist rund, oval, vierkant, rechteckig, sechseckig, achteckig, halbrund oder von
anderer Form, und sein Nennmaß beträgt im allgemeinen mindestens 5 mm; seine Oberfläche ist glatt.
1.2 Dieser Teil der ISO 16120 stellt allgemeine Anforderungen dar und gilt nicht für die folgenden
Erzeugnisse, für die spezielle Normen bestehen oder in Vorbereitung sind:
Für eine Wärmebehandlung bestimmter Walzdraht aus Stahl;
⎯ Walzdraht aus Automatenstählen;
⎯ Walzdraht zum Kaltstauch- und Kaltfließpressen;
⎯ Walzdraht zur Herstellung von Elektroden und Schweißzusätzen;
⎯ Walzdraht für geschweißte Matten und zur Betonbewehrung;
⎯ Walzdraht für Wälzlager (siehe ISO 683-17);
⎯ Walzdraht für die Herstellung von Draht für Federn mit hoher Dauerschwingfestigkeit, wie Ventilfedern.
1.3 Zusätzlich zu den Anforderungen nach diesem Teil der ISO 16120 gelten die in ISO 404 festgelegten
allgemeinen technischen Lieferbedingungen.
Fil-machine en acier non allié destiné à la fabrication de fils - Partie 1: Exigences générales (ISO 16120-1:2011)
L'ISO 16120:2011 est applicable au fil-machine en acier non allié destiné au tréfilage et/ou au laminage à froid. La section droite du fil-machine peut être circulaire, ovale, carrée, rectangulaire, hexagonale, octogonale, demi-ronde ou autre, et en règle générale, de dimension nominale supérieure ou égale à 5 mm, et avec une surface lisse.
L'ISO 16120-1:2011 couvre les exigences générales et n'est pas applicable aux produits suivants, pour lesquels il existe des normes spécifiques ou des études en cours:
le fil-machine en acier destiné aux traitements thermiques;
le fil-machine en acier pour décolletage;
le fil-machine en acier pour frappe et extrusion à froid;
le fil-machine en acier destiné à la fabrication d'électrodes et de produits pour soudage;
le fil-machine en acier pour treillis soudés pour béton armé;
le fil-machine en acier pour les roulements à billes et à rouleaux (voir l'ISO 683‑17);
le fil-machine en acier pour fil à ressort à résistance élevée à la fatigue tels que les ressorts de soupapes.
En plus des exigences de l'ISO 16120-1:2011, les exigences techniques générales de livraison de l'ISO 404 s'appliquent.
Vroče valjana žica iz nelegiranega jekla za vlečenje in/ali hladno valjanje - 1. del: Splošne zahteve (ISO 16120-1:2011)
ISO 16120 velja za valjano žico iz nelegiranega jekla, ki se uporablja za vlečenje in/ali hladno valjanje žic. Prečni prerez je lahko krožen, ovalen, kvadraten, pravokoten, šestkoten, osmerokoten, polkrožen ali druge oblike, v splošnem z nazivno dimenzijo vsaj 5 mm in z gladko površino. Ta del ISO 16120 zajema splošne zahteve in ne velja za izdelke, za katere standardi obstajajo ali se pripravljajo, na primer za: - jekleno valjano žico za toplotno obdelavo; - jekleno valjano žico za prosto rezanje; - jekleno valjano žico za hladno preoblikovanje in hladno ekstruzijo; - jekleno valjano žico za proizvodnjo elektrod in izdelkov za varjenje; - jekleno valjano žico za varjeno blago za ojačitev betona; - jekleno valjano žico za kroglične in kotalne ležaje (glej ISO 683-17); - jekleno valjano žico za žice za mehanske vzmeti z visoko dinamično trdnostjo, kot so ventilske vzmeti. Poleg zahtev v tem delu ISO 16120 veljajo tudi splošne tehnične zahteve za dostavo, opredeljene v ISO 404.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-oktober-2011
1DGRPHãþD
SIST EN 10016-1:1997
9URþHYDOMDQDåLFDL]QHOHJLUDQHJDMHNOD]DYOHþHQMHLQDOLKODGQRYDOMDQMHGHO
6SORãQH]DKWHYH ,62
Non-alloy steel wire rod for conversion to wire - Part 1: General requirements (ISO 16120
-1:2011)
Walzdraht aus unlegiertem Stahl zum Ziehen - Teil 1: Allgemeine Anforderungen (ISO
16120-1:2011)
Fil-machine en acier non allié destiné à la fabrication de fils - Partie 1: Exigences
générales (ISO 16120-1:2011)
Ta slovenski standard je istoveten z: EN ISO 16120-1:2011
ICS:
77.140.65 Jeklene žice, jeklene vrvi in Steel wire, wire ropes and
verige link chains
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 16120-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2011
ICS 77.140.60 Supersedes EN 10016-1:1994
English Version
Non-alloy steel wire rod for conversion to wire - Part 1: General
requirements (ISO 16120-1:2011)
Fil-machine en acier non allié destiné à la fabrication de fils Walzdraht aus unlegiertem Stahl zum Ziehen - Teil 1:
- Partie 1: Exigences générales (ISO 16120-1:2011) Allgemeine Anforderungen (ISO 16120-1:2011)
This European Standard was approved by CEN on 30 June 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 16120-1:2011: E
worldwide for CEN national Members.
Contents Page
Foreword .3
Foreword
This document (EN ISO 16120-1:2011) has been prepared by Technical Committee ISO/TC 17 "Steel" in
collaboration with Technical Committee ECISS/TC 106 “Wire rod and wires” the secretariat of which is held by
AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by January 2012, and conflicting national standards shall be withdrawn at
the latest by January 2012.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 10016-1:1994.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 16120-1:2011 has been approved by CEN as a EN ISO 16120-1:2011 without any
modification.
INTERNATIONAL ISO
STANDARD 16120-1
Second edition
2011-07-01
Non-alloy steel wire rod for conversion to
wire —
Part 1:
General requirements
Fil-machine en acier non allié destiné à la fabrication de fils —
Partie 1: Exigences générales
Reference number
ISO 16120-1:2011(E)
©
ISO 2011
ISO 16120-1:2011(E)
© ISO 2011
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2011 – All rights reserved
ISO 16120-1:2011(E)
Contents Page
Foreword .iv
1 Scope.1
2 Normative references.1
3 Terms and definitions .2
4 Classification .2
5 Ordering information to be supplied by the purchaser.3
6 Production process.4
7 Requirements.4
7.1 General .4
7.2 Quality system .4
7.3 Method of delivery.4
7.4 Delivery condition .4
8 Dimensions, mass and tolerances .4
9 Inspection.4
9.1 Inspection and inspection documents.4
9.2 Extension of inspection.5
9.3 Acceptance unit, number of samples and test pieces .5
9.4 Sampling and preparation of samples and test pieces .6
9.5 Test methods .6
9.6 Retest.7
10 Marking.7
11 Disputes.7
Annex A (normative) Determination of core segregation.8
Annex B (informative) Measurement of surface discontinuities.11
Annex C (informative) Mechanical damage.14
Annex D (normative) Determining the percentage of resolvable pearlite.19
Bibliography.21
ISO 16120-1:2011(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 16120-1 was prepared by Technical Committee ISO/TC 17, Steel, Subcommittee SC 17, Steel wire rod
and wire products.
This second edition cancels and replaces the first edition (ISO 16120-1:2001), which has been technically
revised.
ISO 16120 consists of the following parts, under the general title Non-alloy steel wire rod for conversion to
wire:
⎯ Part 1: General requirements
⎯ Part 2: Specific requirements for general-purpose wire rod
⎯ Part 3: Specific requirements for rimmed and rimmed substitute, low-carbon steel wire rod
⎯ Part 4: Specific requirements for wire rod for special applications
iv © ISO 2011 – All rights reserved
INTERNATIONAL STANDARD ISO 16120-1:2011(E)
Non-alloy steel wire rod for conversion to wire —
Part 1:
General requirements
1 Scope
1.1 ISO 16120 is applicable to wire rod of non-alloy steel intended for wire drawing and/or cold rolling. The
cross-section can be circular, oval, square, rectangular, hexagonal, octagonal, half-round or another shape,
generally with at least 5 mm nominal dimension, and with a smooth surface.
1.2 This part of ISO 16120 covers general requirements and is not applicable to products for which
standards exist or are in development, for example:
⎯ steel wire rod intended for heat treatment;
⎯ free-cutting steel wire rod;
⎯ steel wire rod for cold heading and cold extrusion;
⎯ steel wire rod intended for the production of electrodes and products for welding;
⎯ steel wire rod for welded fabric for reinforcement for concrete;
⎯ steel wire rod for ball and roller bearings (see ISO 683-17);
⎯ steel wire rod for wire for high fatigue strength mechanical springs, such as valve springs.
1.3 In addition to the requirements of this part of ISO 16120, the general technical delivery requirements
specified in ISO 404 apply.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
ISO 377, Steel and steel products — Location and preparation of samples and test pieces for mechanical
testing
ISO 404:1992, Steel and steel products — General technical delivery requirements
ISO 3887, Steels — Determination of depth of decarburization
ISO 4885, Ferrous products — Heat treatments — Vocabulary
ISO 4948-1, Steels — Classification — Part 1: Classification of steels into unalloyed and alloy steels based on
chemical composition
ISO 16120-1:2011(E)
ISO 4948-2, Steels — Classification — Part 2: Classification of unalloyed and alloy steels according to main
quality classes and main property or application characteristics
ISO 6892-1, Metallic materials — Tensile testing — Part 1: Method of test at room temperature
ISO 6929, Steel products — Definitions and classification
ISO/TR 9769, Steel and iron — Review of available methods of analysis
ISO 10474, Steel and steel products — Inspection documents
ISO 14284, Steel and iron — Sampling and preparation of samples for the determination of chemical
composition
ISO 16120-2:2011, Non-alloy steel wire rod for conversion to wire — Part 2: Specific requirements for general-
purpose wire rod
ISO 16120-3:2011, Non-alloy steel wire rod for conversion to wire — Part 3: Specific requirements for rimmed
and rimmed substitute, low-carbon steel wire rod
ISO 161
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.