This document specifies the requirements relating to: Steel X5CrNoMoCuNb14-5 (1.4594) 930 MPa ≤ Rm ≤ 1 080 MPa Bars De ≤ 150 mm.

    • sale 10% off
    • Standard
      8 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies the nominal dimensions and the tolerances on dimensions and shape of hot-rolled steel flat bars and steel wide flats for general purposes.
This standard is not applicable to spring leaves, see EN 10092-1.

    • sale 10% off
    • Standard
      9 pages
      English language
    • e-Library read for
      1 day

This document specifies the nominal dimensions and the tolerances on dimensions and shape of hot-rolled steel flat bars and steel wide flats for general purposes.
This document is not applicable to spring leaves, see EN 10092-1.

    • sale 10% off
    • Standard
      9 pages
      English language
    • e-Library read for
      1 day

This International Standard specifies technical delivery requirements for the surface quality of round bars, squares, hexagons and wire rod in the hot rolled condition with nominal diameters dN from 5 mm to 200 mm. By agreement between manufacturer and purchaser, this International Standard may also be applied to other special profiles. This International Standard applies particularly to steels for engineering and structural applications and, by agreement, may also be applied to tool steels.

    • sale 10% off
    • Standard
      14 pages
      English language
    • e-Library read for
      1 day

This document specifies technical delivery requirements for the surface quality of round bars, squares, hexagons and wire rod in the hot rolled condition with nominal dimensions dN from 5 mm to 200 mm. This document is applicable to bright products and tool steels, if agreed at the time of enquiry and order between manufacturer and purchaser.
By agreement between manufacturer and purchaser, this document can also be applied to other special profiles.
This document is particularly applicable to...
view more

    • sale 10% off
    • Standard
      14 pages
      English language
    • e-Library read for
      1 day

This document specifies the technical delivery requirements for bright steel bars in the drawn, peeled/turned or ground condition and they are intended for mechanical purposes, for example for machine parts. The bright bars are subdivided into the following steel types:
a)   non-alloy general engineering steels;
b)   non-alloy free-cutting steels;
c)   non-alloy and alloy case-hardening steels;
d)   non-alloy and alloy steels for quenching and tempering.
This document lists the mechanical character...
view more

    • sale 10% off
    • Draft
      60 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      53 pages
      English language
    • e-Library read for
      1 day

This document specifies technical delivery requirements for the surface quality of round bars, squares, hexagons and wire rod in the hot rolled condition with nominal dimensions dN from 5 mm to 200 mm. This document is applicable to bright products and tool steels, if agreed at the time of enquiry and order between manufacturer and purchaser. By agreement between manufacturer and purchaser, this document can also be applied to other special profiles. This document is particularly applicable to s...view more

    • sale 15% off
    • Standard
      8 pages
      French language
    • sale 15% off
    • Standard
      7 pages
      English language

1.1   This Part of EN 10263 is applicable to round rod and bars and wire with a diameter up to and including 100 mm, of non-alloy and alloy steel, intended for cold heading and cold extrusion without subsequent heat treatment on the final components.
1.2   prEN 10263-1:2013 is indispensable for this Part of EN 10263.

    • sale 10% off
    • Standard
      10 pages
      English language
    • e-Library read for
      1 day

1.1   This Part of EN 10263 specifies the general technical delivery conditions for round rod, round bars and wire for cold heading and cold extrusion made of:
a)   non alloy steels not intended for heat treatment after cold working, as specified in prEN 10263-2:2013;
b)   non alloy and alloy steels for case hardening, as specified in prEN 10263-3:2013;
c)   non alloy and alloy steels for quenching and tempering, as specified in prEN 10263-4:2013;
d)   stainless steels, as specified in prEN 10263-5:20...
view more

    • sale 10% off
    • Standard
      26 pages
      English language
    • e-Library read for
      1 day

1.1   This Part of EN 10263 is applicable to round rod, round bars and wire with a diameter up to and including 100 mm, of non-alloy and alloy steel, intended for cold heading and cold extrusion and subsequent case hardening treatment.
1.2   prEN 10263-1:2013 is indispensable for this Part of EN 10263.

    • sale 10% off
    • Standard
      18 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies the dimensions, tolerances and physical constants of drawn hexagonal
steel bars used in aerospace construction.

    • sale 10% off
    • Standard
      7 pages
      English language
    • e-Library read for
      1 day

1.1   This Part of EN 10263 is applicable to round rod, round bars and wire made of stainless steels intended for cold heading and cold extrusion having a diameter up to and including:
   25 mm for ferritic and austenitic-ferritic steels;
   50 mm for austenitic steels;
   100 mm for martensitic steels
1.2   prEN 10263-1:2013 is indispensable for the application of this part of EN 10263.

    • sale 10% off
    • Standard
      14 pages
      English language
    • e-Library read for
      1 day

1.1   This Part of EN 10263 is applicable to round rod and round bars and wire with a diameter up to and including 100 mm, of non-alloy and alloy steel, intended for cold heading, cold extrusion, subsequent quenching and tempering and induction hardening or flame hardening.
1.2   prEN 10263-1:2013 is indispensable for this Part of EN 10263.

    • sale 10% off
    • Standard
      21 pages
      English language
    • e-Library read for
      1 day

1.1   This European Standard is applicable to round rod, round bars and wire made of stainless steels intended for cold heading and cold extrusion having a diameter up to and including:
-   25 mm for ferritic and austenitic-ferritic steels;
-   50 mm for austenitic steels;
-   100 mm for martensitic steels.
1.2   EN 10263 1 is indispensable for the application of this part of EN 10263.

    • sale 10% off
    • Standard
      14 pages
      English language
    • e-Library read for
      1 day

1.1   This Part of EN 10263 is applicable to round rod and round bars and wire with a diameter up to and including 100 mm, of non-alloy and alloy steel, intended for cold heading, cold extrusion, subsequent quenching and tempering and induction hardening or flame hardening.
1.2   prEN 10263-1:2013 is indispensable for this Part of EN 10263.

    • sale 10% off
    • Standard
      21 pages
      English language
    • e-Library read for
      1 day

1.1   This Part of EN 10263 is applicable to round rod and bars and wire with a diameter up to and including 100 mm, of non-alloy and alloy steel, intended for cold heading and cold extrusion without subsequent heat treatment on the final components.
1.2   prEN 10263-1:2013 is indispensable for this Part of EN 10263.

    • sale 10% off
    • Standard
      10 pages
      English language
    • e-Library read for
      1 day

1.1   This Part of EN 10263 specifies the general technical delivery conditions for round rod, round bars and wire for cold heading and cold extrusion made of:
a)   non alloy steels not intended for heat treatment after cold working, as specified in prEN 10263-2:2013;
b)   non alloy and alloy steels for case hardening, as specified in prEN 10263-3:2013;
c)   non alloy and alloy steels for quenching and tempering, as specified in prEN 10263-4:2013;
d)   stainless steels, as specified in prEN 10263-5:20...
view more

    • sale 10% off
    • Standard
      26 pages
      English language
    • e-Library read for
      1 day

1.1   This Part of EN 10263 is applicable to round rod, round bars and wire with a diameter up to and including 100 mm, of non-alloy and alloy steel, intended for cold heading and cold extrusion and subsequent case hardening treatment.
1.2   prEN 10263-1:2013 is indispensable for this Part of EN 10263.

    • sale 10% off
    • Standard
      18 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies the dimensions, tolerances and physical constants of rolled rectangular
steel bars, used in aerospace construction.

    • sale 10% off
    • Standard
      10 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies the dimensions, tolerances and physical constants of drawn and/or descaled round steel bars used in aerospace construction.

    • sale 10% off
    • Standard
      6 pages
      English language
    • e-Library read for
      1 day