Determination of the influence of the corrosion protection coating on the anchorage capacity of the transverse anchorage bars in prefabricated reinforced components of autoclaved aerated concrete

This document specifies a pull-out test method for the verification of the applicability of the declared outer diameter of the transverse bars with corrosion protection coating tot,g in the calculation of the anchorage capacity of transverse anchorage bars (see A.10.3 in prEN 12602:2006) in prefabricated reinforced components of autoclaved aerated concrete (AAC).

Bestimmung des Einflusses des Korrosionsschutzüberzugs auf die aufnehmbare Verankerungskraft der zur Verankerung benutzten Querstäbe in vorgefertigten bewehrten Bauteilen aus dampfgehärtetem Porenbeton

Détermination de l'influence de la protection contre la corrosion sur la capacité d'ancrage des barres d'ancrage transversales dans les composants préfabriqués en béton cellulaire autoclavé armé

Le présent document spécifie une méthode d’essai par arrachement permettant de vérifier l’applicabilité du diamètre extérieur déclaré d’une barre transversale avec revêtement de protection contre la corrosion ftot,g dans le calcul de la capacité d’ancrage de barres d’ancrage transversales préfabriquées (voir article A.10.3 du prEN 12602) dans des éléments préfabriqués armés en béton cellulaire autoclavé (BCA).

Določanje vpliva zaščite proti koroziji na sidrno sposobnost prečnih sidrnih palic

General Information

Status
Published
Publication Date
03-Apr-2007
Withdrawal Date
30-Oct-2007
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
05-Sep-2022

Buy Standard

Standard
EN 15361:2008
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Bestimmung des Einflusses des Korrosionsschutzüberzugs auf die aufnehmbare Verankerungskraft der zur Verankerung benutzten Querstäbe in vorgefertigten bewehrten Bauteilen aus dampfgehärtetem PorenbetonDétermination de l'influence de la protection contre la corrosion sur la capacité d'ancrage des barres d'ancrage transversales dans les composants préfabriqués en béton cellulaire autoclavé arméDetermination of the influence of the corrosion protection on the anchorage capacity of the transverse anchorage bars91.100.30Beton in betonski izdelkiConcrete and concrete productsICS:Ta slovenski standard je istoveten z:EN 15361:2007SIST EN 15361:2008en,fr,de01-november-2008SIST EN 15361:2008SLOVENSKI
STANDARD



SIST EN 15361:2008



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 15361April 2007ICS 91.100.30 English VersionDetermination of the influence of the corrosion protectioncoating on the anchorage capacity of the transverse anchoragebars in prefabricated reinforced components of autoclavedaerated concreteDétermination de l'influence de la protection contre lacorrosion sur la capacité d'ancrage des barres d'ancragetransversales dans les composants préfabriqués en bétoncellulaire autoclavé arméBestimmung des Einflusses des Korrosionsschutzüberzugsauf die aufnehmbare Verankerungskraft der zurVerankerung benutzten Querstäbe in vorgefertigtenbewehrten Bauteilen aus dampfgehärtetem PorenbetonThis European Standard was approved by CEN on 24 February 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2007 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 15361:2007: ESIST EN 15361:2008



EN 15361:2007 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Principle.4 4 Apparatus.4 5 Test specimens.5 5.1 General.5 5.2 Measurement of the mean outer diameter of the transverse bar with the corrosion protection coating.5 5.3 Shape, size and preparation of test specimens.5 5.4 Conditioning of test specimens.10 6 Procedure.10 6.1 Pull out test.10 6.2 Determination of dry density and compressive strength of AAC.11 7 Evaluation of test results.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.