EN 679:2005

Determination of the compressive strength of autoclaved aerated concrete

This European Standard specifies the procedure for the determination of the compressive strength of autoclaved aerated concrete.

Bestimmung der Druckfestigkeit von dampfgehärtetem Porenbeton

Diese Europäische Norm legt das Verfahren zur Bestimmung der Druckfestigkeit von dampfgehärtetem
Porenbeton fest.

Détermination de la résistance à la compression du béton cellulaire autoclavé

La présente Norme européenne spécifie le mode opératoire de détermination de la résistance à la
compression du béton cellulaire autoclavé.

Ugotavljanje tlačne trdnosti avtoklaviranega celičastega betona

General Information

• Status: Published
• Publication Date: 05-Jul-2005
• Withdrawal Date: 30-Jan-2006
• ICS: 91.100.30 - Concrete and concrete products
• Technical Committee: CEN/TC 177 - Prefabricated reinforced components of autoclaved aerated concrete or light-weight aggregate concret
• Drafting Committee: CEN/TC 177 - Prefabricated reinforced components of autoclaved aerated concrete or light-weight aggregate concret
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 04-Mar-2020
• Ref Project: SIST EN 679:2005 - Determination of the compressive strength of autoclaved aerated concrete

Relations

• Replaces: EN 679:1993 - Determination of the compressive strength of autoclaved aerated concrete
• Effective Date: 22-Dec-2008

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 679:2005
01-december-2005
1DGRPHãþD
SIST EN 679:2001
8JRWDYOMDQMHWODþQHWUGQRVWLDYWRNODYLUDQHJDFHOLþDVWHJDEHWRQD
Determination of the compressive strength of autoclaved aerated concrete
Bestimmung der Druckfestigkeit von dampfgehärtetem Porenbeton
Détermination de la résistance a la compression du béton cellulaire autoclavé
Ta slovenski standard je istoveten z: EN 679:2005
ICS:
91.100.30 Beton in betonski izdelki Concrete and concrete
products
SIST EN 679:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 679:2005

---------------------- Page: 2 ----------------------

SIST EN 679:2005



EUROPEAN STANDARD
EN 679

NORME EUROPÉENNE

EUROPÄISCHE NORM
July 2005
ICS 91.100.30 Supersedes EN 679:1993
English version
Determination of the compressive strength of autoclaved
aerated concrete
Détermination de la résistance à la compression du béton Bestimmung der Druckfestigkeit von dampfgehärtetem
cellulaire autoclavé Porenbeton
This European Standard was approved by CEN on 3 June 2005.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.

CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.




EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 679:2005: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 679:2005
EN 679:2005 (E)
Contents page
Foreword.3
1 Scope .4
2 Normative references .4
3 Principle.4
4 Apparatus .4
5 Test specimens.4
6 Testing procedure.6
7 Test results.7
8 Test report .7

2

---------------------- Page: 4 ----------------------

SIST EN 679:2005
EN 679:2005 (E)
Foreword
This European Standard (EN 679:2005) has been prepared by Technical Committee CEN/TC 177
“Prefabricated reinforced components of autoclaved aerated concrete or light-weight aggregate concrete with
open structure”, the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by January 2006, and conflicting national standards shall be withdrawn at
the latest by January 2006.
This document supersedes EN 679:1993.
In order to meet the performance requirements as laid down in the product standard for prefabricated
components of autoclaved aerated concrete, a number of standardized test methods are necessary.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bou
...