EN ISO 8367-1:1996

Packaging - Dimensional tolerances for general purpose sacks - Part 1: Paper sacks (ISO 8367-1:1993)

The tolerances of the following dimensions of paper sacks as defined in ISO 6590-1 are specified: ply grammage, length of sack, width of sack, width of gusset, circumference of sack with gussets, width of bottom, width of valve, position of the leading edge of the valve sleeve, print position on sack.

Verpackung - Maßtoleranzen für Säcke für die allgemeine Verwendung - Teil 1: Papiersäcke (ISO 8367-1:1993)

Dieser Teil von ISO 8367 beschreibt eine Reihe von Toleranzen, die für die Herstellung von den in ISO 6590-1 festgelegten Papiersäcken gelten.

Emballages - Tolérances dimensionnelles des sacs d'usage général - Partie 1: Sacs en papier (ISO 8367-1:1993)

La présente partie de l'ISO 8367 prescrit un ensemble de tolérances applicables à la fabrication de sacs en papier tels que définis dans l'ISO 6590-1.

Embalaža - Dovoljena odstopanja mer večnamenskih vreč - 1. del: Papirnate vreče (ISO 8367-1:1993)

General Information

• Status: Published
• Publication Date: 20-Aug-1996
• ICS: 55.080 - Sacks. Bags
• Technical Committee: CEN/TC 261 - Packaging
• Drafting Committee: CEN/TC 261/SC 2/WG 3 - Paper and paperboard packaging for primary, transport and distribution packaging
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Start Date: 31-Mar-2006
• Completion Date: 31-Mar-2006
• Directive: 80/232/EEC - Ranges of nominal quantities and nominal capacities permitted for certain pre-packaged products
• Directive: 87/356/EEC - Ranges of nominal quantities and nominal capacities permitted for certain pre-packged products (Dir. 80/232/EEC amendment)
• Ref Project: SIST EN ISO 8367-1:1997 - Packaging - Dimensional tolerances for general purpose sacks - Part 1: Paper sacks (ISO 8367-1:1993)

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Verpackung - Maßtoleranzen für Säcke für die allgemeine Verwendung - Teil 1: Papiersäcke (ISO 8367-1:1993)Emballages - Tolérances dimensionnelles des sacs d'usage général - Partie 1: Sacs en papier (ISO 8367-1:1993)Packaging - Dimensional tolerances for general purpose sacks - Part 1: Paper sacks (ISO 8367-1:1993)55.080Sacks. BagsICS:Ta slovenski standard je istoveten z:EN ISO 8367-1:1996SIST EN ISO 8367-1:1997en01-maj-1997SIST EN ISO 8367-1:1997SLOVENSKI
STANDARD
INTERNATIONAL STANDARD IS0 8367-l First edition 1993-12-15 Packaging - Dimensional tolerances for general purpose sacks - Part 1: Paper sacks Emballages - Tohances dimensionnelles des sacs d’usage g6nhal - Partie 1: Sacs en papier Reference number IS0 8367-1:1993(E) SIST EN ISO 8367-1:1997

IS0 8367-l : 1993(E) Foreword IS0 (the International Organization for Standardization) is a worldwide federation of national standards bodies (IS0 member bodies). The work of preparing International Standards is normally carried out through IS0 technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. IS0 collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. International Standard IS0 8367-l was prepared by Technical Committee ISO/lC 122, Packaging, Sub-Committee SC 2, Sacks. IS0 8367 consists of the following parts, under the ge - Dimensional tolerances for general purpose sacks: neral title Packaging - Part I: Paper sacks - Part 2: Sacks made from thermoplastic flexible film CD IS0 1993 All rights reserved. No part of this publication may be reproduced or utilized in any form or by any means, electroni
...