Leak detection systems - Part 7: General requirements and test methods for interstitial spaces, leak protecting linings and leak protecting jackets

This standard specifies the type test of the interstitial space and the general requirements and test methods for leak protecting linings and leak protecting jackets which are parts of leak detection systems.

Leckanzeigesysteme - Teil 7: Allgemeine Anforderungen und Prüfverfahren für Überwachungsräume, Leckschutzauskleidung und Leckschutzummantelungen

Diese Europäische Norm legt die Typprüfung des Überwachungsraums und die allgemeinen Anforderungen und Prüfverfahren für Leckschutzauskleidungen und Leckschutzummantelungen, die Teile von Leckanzeigesystemen sind, fest.

Systèmes de détection de fuites - Partie 7: Exigences générales et méthodes d'essais pour les espaces interstitiels, pour revêements intérieurs et revêtements extérieurs protecteurs de fuites

La présente norme spécifie l'essai de type de l'espace interstitiel ainsi que les prescriptions générales et les méthodes d'essai relatives aux inhibiteurs de propulseurs et aux revêtements protecteurs de fuites qui font partie intégrante des systèmes de détection de fuites.

Sistemi za kontrolo tesnosti - 7. del: Splošne zahteve in metode za kontrolo vmesnih prostorov, notranjih in zunanjih tesnih oblog

General Information

Status
Withdrawn
Publication Date
27-May-2003
Withdrawal Date
05-Jul-2016
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
06-Jul-2016

Relations

Buy Standard

Standard
EN 13160-7:2003
English language
25 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Sistemi za kontrolo tesnosti - 7. del: Splošne zahteve in metode za kontrolo vmesnih prostorov, notranjih in zunanjih tesnih oblogLeckanzeigesysteme - Teil 7: Allgemeine Anforderungen und Prüfverfahren für Überwachungsräume, Leckschutzauskleidung und LeckschutzummantelungenSystemes de détection de fuites - Partie 7: Exigences générales et méthodes d'essais pour les espaces interstitiels, pour reveements intérieurs et revetements extérieurs protecteurs de fuitesLeak detection systems - Part 7: General requirements and test methods for interstitial spaces, leak protecting linings and leak protecting jackets23.020.01Fluid storage devices in generalICS:Ta slovenski standard je istoveten z:EN 13160-7:2003SIST EN 13160-7:2003en01-december-2003SIST EN 13160-7:2003SLOVENSKI
STANDARD



SIST EN 13160-7:2003



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13160-7May 2003ICS 23.020.01; 23.040.99; 29.260.20English versionLeak detection systems - Part 7: General requirements and testmethods for interstitial spaces, leak protecting linings and leakprotecting jacketsSystèmes de détection de fuites - Partie 7: Exigencesgénérales et méthodes d'essais pour les espacesinterstitiels, pour revêements intérieurs et revêtementsextérieurs protecteurs de fuitesLeckanzeigesysteme - Teil 7: Allgemeine Anforderungenund Prüfverfahren für Überwachungsräume,Leckschutzauskleidung und LeckschutzummantelungenThis European Standard was approved by CEN on 11 March 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13160-7:2003 ESIST EN 13160-7:2003



EN 13160-7:2003 (E)2ContentspageForeword.31Scope.32Normative references.33Terms and definitions.44Material.45Type test of the interstitial space.55.1General.55.2Abbreviations and symbols.55.3Test equipment.55.4Proof of the tightness and the strength of the interstitial space.65.5Test of the free passage of liquid (only for vacuum systems).65.6Test of the free passage of air.75.7Flow rate test of the intermediate layer.75.8Determination of the flow resistance.95.9Determination of the interst
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.