EN 1343:2001

Kerbs of natural stone for external paving - Requirements and test methods

This European Standard specifies the performance requirements and the corresponding test methods for natural stone kerbs, for external use. It provides for product marking and for the evaluation of conformity of the product to this European Standard. This European Standard covers also characteristics that are of importance to the trade. It does not cover the effect of de-icing salts.

Bordsteine aus Naturstein für Außenbereiche - Anforderungen und Prüfverfahren

Diese Europäische Norm enthält die Leistungsanforderungen an Bordsteine aus Naturstein für Außenbe-
reiche sowie die entsprechenden Prüfverfahren.
Sie ermöglicht die Produktkennzeichnung und Konformitätsbewertung des Produktes nach dieser Euro-
päischen Norm.
Diese Europäische Norm behandelt außerdem charakteristische Merkmale, die für den Handel von
Bedeutung sind.
Die Wirkung von Tausalzen wird nicht behandelt.

Bordures de pierre naturelle pour le pavage extérieur - Exigences et méthodes d'essai

La présente Norme européenne spécifie les exigences de performances et les méthodes d'essais correspondantes, pour les bordures de pierre naturelle en emploi extérieur.
Il spécifie le marquage et l'évaluation de conformité du produit au présent document européenne.
La présente Norme européenne précise également des caractéristiques importantes sur le plan commercial.
Il ne couvre pas les effets des sels de déverglaçage.

Robniki iz naravnega kamna za zunanje tlakovanje - Zahteve in preskusne metode

General Information

• Status: Withdrawn
• Publication Date: 11-Dec-2001
• Withdrawal Date: 27-Nov-2012
• ICS: 93.080.20 - Road construction materials
• Technical Committee: CEN/TC 178 - Paving units and kerbs
• Drafting Committee: CEN/TC 178/WG 2 - Natural stone products
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 28-Nov-2012
• Completion Date: 28-Nov-2012
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/119 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on floorings
• Mandate: M/122 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on roof coverings, rooflights, roof windows and ancillary products
• Ref Project: SIST EN 1343:2002 - Kerbs of natural stone for external paving - Requirements and test methods

Relations

• Replaces: EN 1343:2000 - Kerbs of natural stone for external paving - Requirements and test methods
• Effective Date: 22-Dec-2008
• Replaced By: EN 1343:2012 - Kerbs of natural stone for external paving - Requirements and test methods
• Effective Date: 05-Dec-2012

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Robniki iz naravnega kamna za zunanje tlakovanje - Zahteve in preskusne metodeBordsteine aus Naturstein für Außenbereiche - Anforderungen und PrüfverfahrenBordures de pierre naturelle pour le pavage extérieur - Exigences et méthodes d'essaiKerbs of natural stone for external paving - Requirements and test methods93.080.20Materiali za gradnjo cestRoad construction materials91.100.15Mineralni materiali in izdelkiMineral materials and productsICS:Ta slovenski standard je istoveten z:EN 1343:2001SIST EN 1343:2002en01-september-2002SIST EN 1343:2002SLOVENSKI
STANDARDSIST EN 1343:20011DGRPHãþD



SIST EN 1343:2002



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 1343December 2001ICS 93.080.20Supersedes EN 1343:2000English versionKerbs of natural stone for external paving - Requirements andtest methodsBordures de pierre naturelle pour le pavage extérieur -Exigences et méthodes d'essaiBordsteine aus Naturstein für Außenbereiche -Anforderungen und PrüfverfahrenThis European Standard was approved by CEN on 14 October 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2001 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 1343:2001 ESIST EN 1343:2002



EN 1343:20012ContentspageForeword.31Scope.42Normative references.43Terms and definitions.44Requirements.74.1General.74.2Permissible deviations.84.3Freeze/thaw resistance.114.4Flexural strength.114.5Aspects.114.6Water absorption.124.7Petrographical description.124.8Chemical surface treatment.125Evaluation of conformity.125.1General.125.2Initial type tests.125.3Factory production control.136Acceptance criteria.136.1Sampling.136.2Conformity criteria.
...