Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 4: System H - Safety

This European Standard specifies the requirements and test methods for the construction, safety, classification and marking of non-domestic gas-fired overhead radiant tube systems incorporating two or more burner units with each burner under the control of an automatic burner control system, and operated by a single fan providing a single flue outlet, called system H and referred to in the body of the text as the “system”.
This standard is applicable to Type B52 systems (see 4.3) intended for use in other than domestic dwellings, in which the supply of combustion air and the evacuation of the products of combustion is achieved by mechanical means. This standard is applicable only to such systems that have fully pre-mixed gas/air burners.
This standard is not applicable to:
a)   systems designed for use in domestic dwellings;
b)   outdoor systems;
c)   systems of heat input in excess of 120 kW (based on the net calorific value of the appropriate reference test gas);
d)   systems having a draught diverter;
e)   systems that are designed for continuous condensation within the flue system under normal operating conditions;
f)   systems having combustion products evacuation ducts that are non-metallic.
This standard is applicable to systems which are intended to be type tested. It also includes requirements concerning the evaluation of conformity, including factory production control, but these requirements only apply to POCEDs and their associated terminals.
NOTE   Requirements for systems which are not intended to be type tested would need to be subject to further consideration.
Requirements concerning the rational use of energy have not been included in this European Standard.

Dunkelstrahlersysteme mit mehreren Brennern mit Gebläse für gewerbliche und industrielle Anwendung - Teil 4: System H - Sicherheit

Diese Europäische Norm enthält die Anforderungen und Prüfmethoden für Bauausführung, Sicherheit, Klassifizierung und Kennzeichnung für Dunkelstrahler als Bestandteil eines Systems mit mehreren Brennern (genannt System H und im folgenden Text als System bezeichnet), wobei jede einzelne Brennereinheit von einem Gasfeuerungsautomaten überwacht wird.
Diese Europäische Norm gilt für Systeme der Arten B52 (siehe 4.3), die für gewerbliche und industrielle Anwendung vorgesehen sind und bei denen die Zufuhr der Verbrennungsluft und/oder die Abführung der Verbrennungsprodukte mit mechanischen Mitteln erfolgt. Diese Norm gilt nur für Systeme mit Brennern mit kompletter Gas- und Luftvormischung.
Diese Europäische Norm gilt nicht für:
a)   Systeme, die für eine Verwendung in Wohnungen gedacht sind;
b)   Systeme, die für eine Verwendung im Freien gedacht sind;
c)   Systeme mit einer Wärmebelastung über 120 kW (bezogen auf den Heizwert des jeweiligen Normprüfgases);
d)   Systeme mit einer Strömungssicherung;
e)   Systeme, die für kontinuierliche Kondensation im Abgassystem bei normalen Betriebsbedingungen ausgelegt sind;
f)   Systeme mit Abgassystem aus nichtmetallenen Werkstoffen.
Diese Norm ist anwendbar für Systeme, die für eine Typprüfung vorgesehen sind. Sie enthält auch Anforderungen an die Entwicklung von Übereinstimmung einschließlich Fertigungskontrolle, aber diese Anforderungen gelten nur für POCEDs und deren dazugehörende Windschutzeinrichtungen.
ANMERKUNG   Anforderungen an Systeme, die nicht für eine Typprüfung vorgesehen sind, benötigen weitere Überlegungen.
Anforderungen an die rationelle Verwendung von Energie sind in dieser Europäischen Norm nicht enthalten.

Tubes radiants suspendus à multi-brûleurs utilisant les combustibles gazeux à usage non-domestique - Partie 4 : Système H - Sécurité

La présente Norme européenne définit les exigences et les méthodes d'essai relatives à la construction, la
sécurité, la classification et le marquage des tubes radiants suspendus utilisant les combustibles gazeux, à
usage non domestique, intégrés dans un système à multi-brûleurs, chaque brûleur élémentaire étant équipé
d'un système automatique de commande et de sécurité, comprenant un seul ventilateur et une évacuation
unique des produits de combustion, appelé système H et désigné dans le corps du texte par le "système".
La présente norme s'applique aux systèmes de Type B52 (voir 4.3), destinés à un usage autre que dans des
locaux domestiques où l'arrivée en air comburant et l'évacuation des produits de combustion sont assurées
par des moyens mécaniques. Cette norme ne s’applique qu’aux systèmes avec brûleurs à prémélange total.
La présente norme ne s'applique pas :
a) aux systèmes conçus pour des locaux domestiques ;
b) aux systèmes utilisés en plein air ;
c) aux systèmes dont le débit calorifique d'un brûleur élémentaire dépasse 120 kW (sur le pouvoir
calorifique inférieur du gaz de référence approprié) ;
d) aux systèmes disposant d'un coupe-tirage antirefouleur ;
e) aux systèmes conçus pour une condensation continue dans le système d'évacuation dans des conditions
de fonctionnement normales ;
f) aux systèmes équipés de conduits d'évacuation des produits de combustion non métalliques.
La présente norme est applicable aux systèmes qui sont destinés à subir des essais de type. Elle comprend
également des exigences relatives à l’évaluation de la conformité, y compris le contrôle de fabrication en
usine, ces dernières exigences ne s’appliquant toutefois exclusivement qu’aux POCED et leurs terminaux
associés.
NOTE Les exigences pour les systèmes qui ne sont pas destinés à subir des essais de type doivent faire l'objet
d'une attention particulière.

Stropna cevna sevala z več plinskimi gorilniki za nestanovanjske prostore - 4. del: Sistem H - Varnost

General Information

Status
Withdrawn
Publication Date
10-Mar-2009
Withdrawal Date
08-Oct-2019
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
09-Oct-2019

Relations

Buy Standard

Standard
EN 777-4:2009
English language
111 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 777-4:2009
01-julij-2009
1DGRPHãþD
SIST EN 777-4:1999
SIST EN 777-4:1999/A1:2002
SIST EN 777-4:1999/A2:2002
SIST EN 777-4:1999/A3:2003
6WURSQDFHYQDVHYDOD]YHþSOLQVNLPLJRULOQLNL]DQHVWDQRYDQMVNHSURVWRUHGHO
6LVWHP+9DUQRVW
Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part
4: System H - Safety
Gas-Systeme-Heizstrahler - Dunkelstrahlersysteme mit mehreren Brennern mit Gebläse
für gewerbliche und industrielle Anwendung - Teil 4: System H - Sicherheit
Tubes radiants suspendus a multi-bruleurs utilisant les combustibles gazeux a usage
non-domestique - Partie 4 : Systeme H - Sécurité
Ta slovenski standard je istoveten z: EN 777-4:2009
ICS:
97.100.20 Plinski grelniki Gas heaters
SIST EN 777-4:2009 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 777-4:2009

---------------------- Page: 2 ----------------------

SIST EN 777-4:2009
EUROPEAN STANDARD
EN 777-4
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2009
ICS 91.140.40 Supersedes EN 777-4:1999
English Version
Multi-burner gas-fired overhead radiant tube heater systems for
non-domestic use - Part 4: System H - Safety
Tubes radiants suspendus à multi-brûleurs utilisant les Gasgeräte-Heizstrahler Dunkelstrahlersysteme mit
combustibles gazeux à usage non-domestique - Partie 4 : mehreren Brennern mit Gebläse für gewerbliche und
Système H - Sécurité industrielle Anwendung - Teil 4: System H - Sicherheit
This European Standard was approved by CEN on 24 January 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 777-4:2009: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 777-4:2009
EN 777-4:2009 (E)
Contents Page
Foreword . 4
1 Scope. 5
2 Normative references . 5
3 Terms and definitions . 6
3.1 System and its constituent parts . 6
3.2 Combustion circuit . 8
3.3 Adjusting, control and safety devices . 9
3.4 System operation . 10
3.5 Gases. 13
3.6 Conditions of operation and measurement. 14
3.7 Country of destination . 14
4 Classification of systems . 15
4.1 Classification according to the nature of the gases used (categories) . 15
4.2 C
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.