EN ISO 10426-2:2003

Petroleum and natural gas industries - Cements and materials for well cementing - Part 2: Testing of well cements (ISO 10426-2:2003)

ISO 10426-2:2003 specifies requirements and gives recommendations for the testing of cement slurries and related materials under simulated well conditions.

Erdöl- und Erdgasindustrie - Zement Bohrlochmaterialien - Teil 2: Prüfempfehlungen für Bohrloch-Zemente (ISO 10426-2:2003)

Industries du pétrole et du gaz naturel - Ciments et matériaux pour la cimentation des puits - Partie 2: Essais de ciments pour puits (ISO 10426-2:2003)

L'ISO 10426-2:2003 spécifie les exigences et donne des recommandations pour les essais de laitier de ciment et matériaux associés dans des conditions de puits simulé.

Industrija za predelavo nafte in zemeljskega plina – Cementi in materiali za cementiranje vrtin – 2. del: Preskušanje cementov za vrtine (ISO 10426-2:2003)

General Information

• Status: Published
• Publication Date: 14-Oct-2003
• Withdrawal Date: 29-Apr-2004
• ICS: 91.100.10 - Cement. Gypsum. Lime. Mortar
• Technical Committee: CEN/TC 12 - Materials, equipment and offshore structures for petroleum and natural gas industries
• Drafting Committee: CEN/TC 12 - Materials, equipment and offshore structures for petroleum and natural gas industries
• Current Stage: 9092 - Decision on results of review/2YR ENQ - revise - Review Enquiry
• Start Date: 26-Apr-2007
• Completion Date: 26-Apr-2007
• Ref Project: SIST EN ISO 10426-2:2004 - Petroleum and natural gas industries - Cements and materials for well cementing - Part 2: Testing of well cements (ISO 10426-2:2003)

Relations

• Amended By: EN ISO 10426-2:2003/A1:2005 - Petroleum and natural gas industries - Cements and materials for well cementing - Part 2: Testing of well cements - Amendment 1: Water-wetting capability testing (ISO 10426-2:2003/A1:2005)
• Effective Date: 22-Dec-2008
• Corrected By: EN ISO 10426-2:2003/AC:2007 - Petroleum and natural gas industries - Cements and materials for well cementing - Part 2: Testing of well cements (ISO 10426-2:2003/Cor 1:2006)
• Effective Date: 22-Dec-2008
• Revised: prEN ISO 10426-2 - Petroleum and natural gas industries - Cements and materials for well cementing - Part 2: Testing of well cements (ISO/DIS 10426-2:2010)
• Effective Date: 22-Dec-2008

Standards Content (Sample)

SLOVENSKI STANDARD
01-maj-2004
Industrija za predelavo nafte in zemeljskega plina – Cementi in materiali za
cementiranje vrtin – 2. del: Preskušanje cementov za vrtine (ISO 10426-2:2003)
Petroleum and natural gas industries - Cements and materials for well cementing - Part
2: Testing of well cements (ISO 10426-2:2003)
Erdöl- und Erdgasindustrie - Zement Bohrlochmaterialien - Teil 2: Prüfempfehlungen für
Bohrloch-Zemente (ISO 10426-2:2003)
Industries du pétrole et du gaz naturel - Ciments et matériaux pour la cimentation des
puits - Partie 2: Essais de ciments pour puits (ISO 10426-2:2003)
Ta slovenski standard je istoveten z: EN ISO 10426-2:2003
ICS:
75.180.10 Oprema za raziskovanje in Exploratory and extraction
odkopavanje equipment
91.100.10 Cement. Mavec. Apno. Malta Cement. Gypsum. Lime.
Mortar
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 10426-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2003
ICS 75.020; 91.100.10
English version
Petroleum and natural gas industries - Cements and materials
for well cementing - Part 2: Testing of well cements (ISO 10426-
2:2003)
Industries du pétrole et du gaz naturel - Ciments et
matériaux pour la cimentation des puits - Partie 2: Essais
de ciments pour puits (ISO 10426-2:2003)
This European Standard was approved by CEN on 1 October 2003.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2003 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10426-2:2003 E
worldwide for CEN national Members.

Foreword
This document (EN ISO 10426-2:2003) has been prepared by Technical Committee ISO/TC 67
"Materials, equipment and offshore structures for petroleum and natural gas industries" in
collaboration with Technical Committee CEN/TC 12 "Materials, equipment and offshore
structures for petroleum and natural gas industries", the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by April 2004, and conflicting national
standards shall be withdrawn at the latest by April 2004.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium, Czech
Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and
the United Kingdom.
NOTE FROM CMC  The foreword is susceptible to be amended on reception of the German
language version. The confirmed or amended foreword, and when appropriate, the normative
annex ZA for the references to international publications with their relevant European
publications will be circulated with the German version.
Endorsement notice
The text of ISO 10426-2:2003 has been approved by CEN as EN ISO 10426-2:2003 without any
modifications.
INTERNATIONAL ISO
STANDARD 10426-2
First edition
2003-10-15
Petroleum and natural gas industries —
Cements and materials for well
cementing —
Part 2:
Testing of well cements
Industries du pétrole et du gaz naturel — Ciments et matériaux pour la
cimentation des puits —
Partie 2: Essais de ciment pour puits

Reference number
ISO 10426-2:2003(E)
©
ISO 2003
ISO 10426-2:2003(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

©  ISO 2003
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
ii © ISO 2003 — All rights reserved

ISO 10426-2:2003(E)
Contents Page
Foreword. vi
Introduction . vii
1 Scope. 1
2 Normative references . 1
3 Terms, definitions and symbols . 1
3.1 Terms and definitions. 1
3.2 Symbols . 7
4 Sampling . 8
4.1 General. 8
4.2 Sampling cement at field location. 8
4.3 Sampling cement blends at field location . 8
4.4 Sampling dry cement additives at field location . 8
4.5 Sampling liquid cement additives at field location . 8
4.6 Sampling mixing water. 8
4.7 Shipping and storage . 10
4.8 Sample preparation prior to testing . 10
4.9 Sample disposal. 10
5 Preparation of slurry. 10
5.1 General. 10
5.2 Apparatus. 10
5.3 Procedure. 12
6 Determination of slurry density. 14
6.1 Preferred apparatus . 14
6.2 Calibration. 14
6.3 Procedure. 14
6.4 Alternative apparatus and procedure . 16
7 Well-simulation compressive strength tests. 16
7.1 General. 16
7.2 Sampling . 16
7.3 Preparation of slurry. 17
7.4 Apparatus. 17
7.5 Procedure. 18
7.6 Determination of cement compressive strength at the top of long cement columns . 20
8 Non-destructive sonic testing of cement .26
8.1 General. 26
8.2 Apparatus. 26
8.3 Sampling . 26
8.4 Preparation of slurry. 26
8.5 Procedure. 26
8.6 Curing time . 26
8.7 Curing schedules . 26
8.8 Data reporting. 27
9 Well-simulation thickening-time tests . 27
9.1 General. 27
9.2 Apparatus and material . 27
9.3 Calibration. 28
9.4 Test procedure . 30
ISO 10426-2:2003(E)
9.5 Determination of test schedule.32
10 Static fluid-loss tests .38
10.1 General .38
10.2 Apparatus.38
10.3 Safety.39
10.4 Mixing procedure.39
10.5 Conditioning procedures.39
10.6 Procedures for testing at temperatures uuuu 88 °°°°C (190 °°°°F).
...