Petroleum and natural gas industries - Cements and materials for well cementing - Part 1: Specification - Technical Corrigendum 2 (ISO 10426-1:2009/Cor 2:2012)

ISO 10426-1:2009 specifies requirements and gives recommendations for six classes of well cements, including their chemical and physical requirements and procedures for physical testing.
ISO 10426-1:2009 is applicable to well cement classes A, B, C and D, which are the products obtained by grinding Portland cement clinker and, if needed, calcium sulfate as an interground additive. Processing additives can be used in the manufacture of cement of these classes. Suitable set-modifying agents can be interground or blended during manufacture of class D cement.
ISO 10426-1:2009 is also applicable to well cement classes G and H, which are the products obtained by grinding clinker with no additives other than one or more forms of calcium sulfate, water or chemical additives as required for chromium (VI) reduction.

Erdöl- und Erdgasindustrie - Zemente und Materialien für die Zementation von Tieflochbohrungen - Teil 1: Anforderungen - Berichtigung 2 (ISO 10426-1:2009/Cor 2:2012)

Industries du pétrole et du gaz naturel - Ciments et matériaux pour la cimentation des puits - Partie 1: Spécification - Rectificatif technique 2 (ISO 10426-1:2009/Cor 2:2012)

Industrija za predelavo nafte in zemeljskega plina - Cementi in materiali za cementiranje vrtin - 1. del: Specifikacija - Tehnični popravek 2 (ISO 10426-1:2009/Cor 2:2012)

General Information

Status
Published
Publication Date
15-May-2018
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Due Date
16-May-2018
Completion Date
16-May-2018

RELATIONS

Buy Standard

Corrigendum
EN ISO 10426-1:2010/AC:2018
French language
4 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Erdöl- und Erdgasindustrie - Zemente und Materialien für die Zementation von Tieflochbohrungen - Teil 1: Anforderungen - Berichtigung 2 (ISO 10426-1:2009/Cor 2:2012)Industries du pétrole et du gaz naturel - Ciments et matériaux pour la

cimentation des puits - Partie 1: Spécification - Rectificatif technique 2 (ISO 10426-1:2009/Cor 2:2012)Petroleum and natural gas industries - Cements and materials for well cementing - Part 1: Specification - Technical Corrigendum 2 (ISO 10426-1:2009/Cor 2:2012)91.100.10Cement. Mavec. Apno. MaltaCement. Gypsum. Lime. Mortar75.180.10Oprema za raziskovanje, vrtanje in odkopavanjeExploratory, drilling and extraction equipmentICS:Ta slovenski standard je istoveten z:EN ISO 10426-1:2009/AC:2018SIST EN ISO 10426-1:2010/AC:2018fr01-julij-2018SIST EN ISO 10426-1:2010/AC:2018SLOVENSKI

STANDARDSIST EN ISO 10426-1:2010/AC:20101DGRPHãþD
SIST EN ISO 10426-1:2010/AC:2018
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN ISO 10426-1:2009/AC
Mai 2018 ICS 91.100.10; 75.180.10
Version Française
Industries du pétrole et du gaz naturel - Ciments et matériaux pour la

cimentation des puits - Partie 1: Spécification - Rectificatif technique 2 (ISO 10426-1:2009/Cor 2:2012)

Erdöl- und Erdgasindustrie - Zemente und Materialien für die Zementation von Tieflochbohrungen - Teil 1: Anforderungen - Berichtigung 2 (ISO 10426-1:2009/Cor 2:2012)

Petroleum and natural gas industries - Cements and materials for well cementing - Part 1: Specification - Technical Corrigendum 2 (ISO 10426-1:2009/Cor 2:2012)

Ce corrigendum prendra effet le 16 mai 2018 pour incorporation dans la version française officielle de la EN.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Rue de la Science 23,

B-1040 Brussels © 2018 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Tous droits d'exploitation sous quelque forme et de quelque manière que ce soit réservés dans le monde entier aux membres nationaux du CEN. Alle Rechte der Verwertung, gleich in welcher Form und in welchem Verfahren, sind weltweit den nationalen Mitgliedern von CEN vorbehalten. Ref. No.:EN ISO 10426-1:2009/AC:2018 F SIST EN ISO 10426-1:2010/AC:2018

EN ISO 10426-1:2009/AC:201
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.