EN 12272-1:2002

Surface dressing - Test methods - Part 1: Rate of spread and accuracy of spread of binder and chippings

This European Standard specifies test methods for determining the rates of spread and accuracy of spread of binder and chippings of a surface dressing on a section of road at a given time. It is also applicable to surface dressings on airfields and other trafficked areas.
The test methods are used on site to check the ability of binder sprayers and chipping spreaders to meet the intended rates of spread and tolerances and coefficients of variation.
The test methods for measuring the rates of spread and accuracy of spread of binders and chippings are not applicable to combined chipping-binder spreaders.

Oberflächenbehandlung - Prüfverfahren - Teil 1: Dosierung und Querverteilung von Bindemitteln und Splitt

Diese Europäische Norm legt Prüfverfahren für die Bestimmung der Dosierung und Genauigkeit der Verteilung von Bindemitteln und Splitt bei einer Oberflächenbehandlung zu einem bestimmten Zeitpunkt und in einem bestimmten Abschnitt einer Straßenoberfläche fest. Sie ist auch für Oberflächenbehandlungen auf Flugplätzen und anderen Verkehrsflächen anwendbar.
Die Prüfungen werden auf Baustellen benutzt, um zu überprüfen, ob die Bindemittel- und Splitt-verteiler die angegebenen Dosierungen und Variationskoeffizienten der Querverteilung einhalten.
Die Prüfverfahren für die Dosierung und Querverteilung von Bindemitteln und Splitt sind nicht für kombinierte Splitt-Bindemittel-Verteilergeräte anwendbar.

Enduits superficiels d'usure - Méthodes d'essai - Partie 1: Taux d'épandage et régularité transversale du liant et des gravillons

La présente Norme européenne spécifie les méthodes d'essai à employer pour la détermination des taux d'épandage et de la régularité transversale du liant et des gravillons d'un enduit superficiel d'usure sur une section de route à un instant donné. Elle s'applique également aux enduits superficiels d'usure des terrains d'aviation et autres zones de trafic.
Les méthodes d'essai sont utilisées sur le site pour contrôler la capacité des répandeuses de liant et épandeuses de gravillons à respecter les taux d'épandage, tolérances et coefficients de variation prescrits.
Les méthodes d'essai recommandées pour la mesure des taux d'épandage et de la régularité transversale des liants et des gravillons ne s'appliquent pas aux épandeuses mixtes de gravillons et de liants.

Površinske prevleke - Preskusne metode - 1. del: Količina pobrizga veziva in posipa drobirja

General Information

• Status: Published
• Publication Date: 26-Feb-2002
• Withdrawal Date: 29-Jun-2004
• ICS: 93.080.20 - Road construction materials
• Technical Committee: CEN/TC 227 - Road materials
• Drafting Committee: CEN/TC 227/WG 2 - Surface dressing and slurry surfacing
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Start Date: 03-Mar-2008
• Completion Date: 13-Mar-2015
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Ref Project: SIST EN 12272-1:2002 - Surface dressing - Test methods - Part 1: Rate of spread and accuracy of spread of binder and chippings

Relations

• Revised: prEN 12272-1 - Surface dressing - Test methods - Part 1: Rate of spread and accuracy of spread of binder and chippings
• Effective Date: 24-May-2023
• Revised: prEN 12272-1 - Surface dressing - Test methods - Part 1: Rate of spread and accuracy of spread of binder and chippings
• Effective Date: 18-Jan-2023

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Oberflächenbehandlung - Prüfverfahren - Teil 1: Dosierung und Querverteilung von Bindemitteln und SplittEnduits superficiels d'usure - Méthodes d'essai - Partie 1: Taux d'épandage et régularité transversale du liant et des gravillonsSurface dressing - Test methods - Part 1: Rate of spread and accuracy of spread of binder and chippings93.080.20Materiali za gradnjo cestRoad construction materialsICS:Ta slovenski standard je istoveten z:EN 12272-1:2002SIST EN 12272-1:2002en01-september-2002SIST EN 12272-1:2002SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12272-1February 2002ICS 93.080.20English versionSurface dressing - Test methods - Part 1: Rate of spread andaccuracy of spread of binder and chippingsEnduits superficiels d'usure - Méthodes d'essai - Partie 1:Taux d'épandage et régularité transversale du liant et desgravillonsOberflächenbehandlung - Prüfverfahren - Teil 1: Dosierungund Querverteilung von Bindemitteln und SplittThis European Standard was approved by CEN on 9 November 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12272-1:2002 ESIST EN 12272-1:2002

Determination of the accuracy of spread of chippings.19Annex B (informative)
Equipment recommended for use in the determination of the accuracy ofspread of binder test.21Annex C (normative)
Determination of the accuracy of spread of binder.27Annex D (informative)
The picking frame, used in the determination of the accuracy
of spread ofchipping test.28SIST EN 12272-1:2002

Test methods
Part 1: Rate of spread and accuracy of spread of binder andchippings.prEN 12272-2, Surface dressing
Test methods
Part 2: Visual assessment of defects.prEN 12272-3, Surface dressing
Test methods
Part 3: Determination of binder aggregate adhesivity by the vialitplate shock test method; German version prEN 12272-3:1997.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain,Sweden, Switzerland and the United Kingdom.SIST EN 12272-1:2002
...