EN 13880-5:2024

Hot applied joint sealants - Part 5: Test method for the determination of flow resistance

This document describes a method for determining the flow resistance of hot applied joint sealants to characterize the stability at elevated temperature.

Heiß verarbeitbare Fugenmassen - Teil 5: Prüfverfahren zur Bestimmung der Fließlänge

Dieses Dokument beschreibt ein Verfahren zur Bestimmung der Fließlänge von heiß verarbeitbaren Fugenmassen, um die Stabilität bei erhöhter Temperatur zu charakterisieren.

Produits d'étanchéité pour joints appliqués à chaud - Partie 5 : Méthode d'essai pour la détermination de la résistance à l'écoulement

Ce document décrit une méthode pour déterminer la résistance au fluage des produits de scellement appliqués à chaud afin de caractériser la stabilité à température élevée.

Toplo nanosljive tesnilne mase za stike - 5. del: Preskusna metoda za ugotavljanje odpornosti proti tečenju

General Information

• Status: Published
• Publication Date: 05-Mar-2024
• ICS: 93.080.20 - Road construction materials
• Technical Committee: CEN/TC 227 - Road materials
• Drafting Committee: CEN/TC 227/WG 3 - Materials for concrete roads including joint fillers and sealants
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 06-Mar-2024
• Due Date: 19-Feb-2025
• Completion Date: 06-Mar-2024
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Mandate: M/124 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on road construction products
• Ref Project: SIST EN 13880-5:2024 - Hot applied joint sealants - Part 5: Test method for the determination of flow resistance

Relations

• Replaces: EN 13880-5:2004 - Hot applied joint sealants - Part 5: Test method for the determination of flow resistance
• Effective Date: 19-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 13880-5:2023
01-september-2023
Toplo nanosljive tesnilne mase za stike - 5. del: Preskusna metoda za ugotavljanje
odpornosti proti tečenju
Hot applied joint sealants - Part 5: Test method for the determination of flow resistance
Heiß verarbeitbare Fugenmassen - Teil 5: Prüfverfahren zur Bestimmung der Fließlänge
Produits de scellement de joints appliqués à chaud - Partie 5: Méthode d'essai pour la
détermination de la résistance au fluage
Ta slovenski standard je istoveten z: prEN 13880-5
ICS:
91.100.50 Veziva. Tesnilni materiali Binders. Sealing materials
93.080.20 Materiali za gradnjo cest Road construction materials
oSIST prEN 13880-5:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 13880-5:2023

---------------------- Page: 2 ----------------------
oSIST prEN 13880-5:2023


DRAFT
EUROPEAN STANDARD
prEN 13880-5
NORME EUROPÉENNE

EUROPÄISCHE NORM

June 2023
ICS 93.080.20 Will supersede EN 13880-5:2004
English Version

Hot applied joint sealants - Part 5: Test method for the
determination of flow resistance
Produits de scellement de joints appliqués à chaud - Heiß verarbeitbare Fugenmassen - Teil 5:
Partie 5: Méthode d'essai pour la détermination de la Prüfverfahren zur Bestimmung der Fließlänge
résistance au fluage
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 227.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 13880-5:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 13880-5:2023
prEN 13880-5:2023 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Term and definition . 4
4 Principle . 4
5 Apparatus . 4
6 Preparation and conditioning of the test specimens . 6
7 Test conditions . 7
8 Procedure. 7
9 Expression of results .
...