EN ISO 7784-3:2006

Paints and varnishes - Determination of resistance to abrasion - Part 3: Reciprocating test panel method (ISO 7784-3:2000)

This part of ISO 7784 is one of a series of standards that deals with the sampling and testing of paints, varnishes and related products. It specifies a method of determining the resistance to abrasion of a dried film of paint, varnish or related product by rubbing the film against a strip of abrasive paper attached to a stationary wheel.

Beschichtungsstoffe - Bestimmung des Abriebwiderstandes - Teil 3: Verfahren mit sich hin und her bewegender Probenplatte (ISO 7784-3:2000)

Dieser Teil von ISO 7784 gehört zu einer Reihe von Normen, welche die Probenahme und die Prüfung von
Beschichtungsstoffen, wie Lacke und Anstrichstoffe, behandelt.
Dieser Teil von ISO 7784 legt ein Verfahren zum Bestimmen des Abriebwiderstandes von Beschichtungen fest,
bei dem die Beschichtung durch einen Streifen Schleifpapier beansprucht wird, der auf einem feststehenden Rad
befestigt ist.

Peintures et vernis - Détermination de la résistance à l'abrasion - Partie 3: Méthode de panneau d'essai animé d'un mouvement de va-et-vient (ISO 7784-3:2000)

L’IEC 61853-3:2018 décrit le calcul des valeurs des caractéristiques assignées d’énergie des modules PV. Le présent document a pour objet de définir une méthodologie qui permet de déterminer l’énergie produite par les modules PV (watts-heures) et les caractéristiques assignées d’énergie massique pour un profil climatique (adimensionnelles) pour une année complète à la puissance maximale de fonctionnement pour le ou les profils climatiques de référence indiqués dans l’IEC 61853-4. Le présent document est appliqué afin de déterminer une puissance de sortie de module spécifique selon un profil climatique de référence normalisé afin de comparer des modules assignés.

Barve in laki - Ugotavljanje odpornosti proti obrabi - 3. del: Metoda z izmenjajočo se preskusno ploščo (ISO 7784-3:2000)

General Information

• Status: Withdrawn
• Publication Date: 04-Apr-2006
• Withdrawal Date: 12-Apr-2016
• ICS: 87.040 - Paints and varnishes
• Technical Committee: CEN/TC 139 - Paints and varnishes
• Drafting Committee: CEN/TC 139 - Paints and varnishes
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 13-Apr-2016
• Ref Project: SIST EN ISO 7784-3:2006 - Paints and varnishes - Determination of resistance to abrasion - Part 3: Reciprocating test panel method (ISO 7784-3:2000)

Relations

• Replaced By: EN ISO 7784-3:2016 - Paints and varnishes - Determination of resistance to abrasion - Part 3: Method with abrasive-paper covered wheel and linearly reciprocating test specimen (ISO 7784-3:2016)
• Effective Date: 20-Apr-2016

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 7784-3:2006
01-julij-2006
%DUYHLQODNL8JRWDYOMDQMHRGSRUQRVWLSURWLREUDELGHO0HWRGD]L]PHQMDMRþR
VHSUHVNXVQRSORãþR,62
Paints and varnishes - Determination of resistance to abrasion - Part 3: Reciprocating
test panel method (ISO 7784-3:2000)
Beschichtungsstoffe - Bestimmung des Abriebwiderstandes - Teil 3: Verfahren mit sich
hin und her bewegender Probenplatte (ISO 7784-3:2000)
Peintures et vernis - Détermination de la résistance a l'abrasion - Partie 3: Méthode de
panneau d'essai animé d'un mouvement de va-et-vient (ISO 7784-3:2000)
Ta slovenski standard je istoveten z: EN ISO 7784-3:2006
ICS:
87.040
SIST EN ISO 7784-3:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN ISO 7784-3
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2006
ICS 87.040

English Version
Paints and varnishes - Determination of resistance to abrasion -
Part 3: Reciprocating test panel method (ISO 7784-3:2000)
Peintures et vernis - Détermination de la résistance à Beschichtungsstoffe - Bestimmung des Abriebwiderstandes
l'abrasion - Partie 3: Méthode de panneau d'essai animé - Teil 3: Verfahren mit sich hin und her bewegender
d'un mouvement de va-et-vient (ISO 7784-3:2000) Probenplatte (ISO 7784-3:2000)
This European Standard was approved by CEN on 9 March 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 7784-3:2006: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

EN ISO 7784-3:2006 (E)






Foreword



The text of ISO 7784-3:2000 has been prepared by Technical Committee ISO/TC 35 "Paints and
varnishes” of the International Organization for Standardization (ISO) and has been taken over
as EN ISO 7784-3:2006 by Technical Committee CEN/TC 139 "Paints and varnishes", the
secretariat of which is held by DIN.

This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by October 2006, and conflicting national
standards shall be withdrawn at the latest by October 2006.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.



Endorsement notice

The text of ISO 7784-3:2000 has been approved by CEN as EN ISO 7784-3:2006 without any
modifications.

2

---------------------- Page: 3 ----------------------

INTERNATIONAL ISO
STANDARD 7784-3
First edition
2000-03-15
Paints and varnishes — Determination
of resistance to abrasion —
Part 3:
Reciprocating test panel method
Peintures et vernis — Détermination de la résistance à l'abrasion —
Partie 3: Méthode de panneau d'essai animé d'un mouvement de
va-et-vient
Reference number
ISO 7784-3:2000(E)
©
ISO 2000

---------------------- Page: 4 ----------------------

ISO 7784-3:2000(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not
be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this
file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this
area.
Adobe is a trademark of Adobe Systems Incorporated.
Detail
...