EN 681-1:1996/A2:2002

Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 1: Vulcanized rubber

Created at the request of A. Ganesh (CC/010319)
* (2 Nov 2000) DOW=DAV+21 months (CEN/BT C 149/2000) - pls contact Ashok Ganesh  to check before DAV
2020-01-20: Originator of XML version: NEN (on behalf of NEN, ASI, DS, SFS, SIS, SN)

Elastomer - Dichtungen - Werkstoff - Anforderungen für Rohrleitungs- Dichtungen für Anwendungen in der Wasserversorgung und Entwässerung - Teil 1: Vulkanisierter Gummi

Garnitures d'étanchéité en caoutchouc - Spécification des matériaux pour garnitures d'étanchéité pour joints de canalisations utilisées dans le domaine de l'eau et de l'évacuation - Partie 1: Caoutchouc vulcanisé

Elastomerna tesnila – Zahteve za materiale za tesnila za uporabo v napeljavah za vodo in kanalizacijo – 1. del: Vulkanizirana guma – Dopolnilo A2

General Information

• Status: Published
• Publication Date: 19-Mar-2002
• Withdrawal Date: 30-Dec-2003
• ICS: 23.040.05 - Pipeline and its parts for external sewage systems
• ICS: 23.040.80 - Seals for pipe and hose assemblies
• Technical Committee: CEN/TC 208 - Elastomeric seals for joints in pipework and pipelines
• Drafting Committee: CEN/TC 208 - Elastomeric seals for joints in pipework and pipelines
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 20-Mar-2002
• Completion Date: 20-Mar-2002
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/131 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on pipes, tanks and ancillaries, not in contact with water intended for human consumption
• Ref Project: SIST EN 681-1:2000/A2:2002 - Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 1: Vulcanized rubber

Relations

• Amends: EN 681-1:1996 - Elastomeric seals - Materials requirements for pipe joint seals used in water and drainage applications - Part 1: Vulcanized rubber
• Effective Date: 22-Dec-2008
• Corrected By: EN 681-1:1996/AC:2002 - Elastomeric seals - Materials requirements for pipe joint seals used in water and drainage applications - Part 1: Vulcanized rubber
• Effective Date: 22-Dec-2008

Standards Content (Sample)

SLOVENSKI STANDARD
01-december-2002
Elastomerna tesnila – Zahteve za materiale za tesnila za uporabo v napeljavah za
vodo in kanalizacijo – 1. del: Vulkanizirana guma – Dopolnilo A2
Elastomeric seals - Material requirements for pipe joint seals used in water and drainage
applications - Part 1: Vulcanized rubber
Elastomer-Dichtungen - Werkstoff-Anforderungen für Rohrleitungs-Dichtungen für
Anwendungen in der Wasserversorgung und Entwässerung - Teil 1: Vulkanisierter
Gummi
Garnitures d'étanchéité en caoutchouc - Spécifications des matériaux pour garnitures
d'étanchéité pour joints de canalisation utilisés dans le domaine de l'eau et de
l'évacuation - Partie 1: Caoutchouc vulcanisé
Ta slovenski standard je istoveten z: EN 681-1:1996/A2:2002
ICS:
23.040.80
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 681-1:1996/A2
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2002
ICS 23.040.80
English version
Elastomeric seals - Material requirements for pipe joint seals
used in water and drainage applications - Part 1: Vulcanized
rubber
Garnitures d'étanchéité en caoutchouc - Spécification des Elastomer-Dichtungen - Werkstoff-Anforderungen für
matériaux pour garnitures d'étanchéité pour joints de Rohrleitungs-Dichtungen für Anwendungen in der
canalisations utilisées dans le domaine de l'eau et de Wasserversorgung und Entwässerung - Teil 1:
l'évacuation - Partie 1: Caoutchouc vulcanisé Vulkanisierter Gummi
This amendment A2 modifies the European Standard EN 681-1:1996; it was approved by CEN on 25 February 2002.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the Management Centre or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2002 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 681-1:1996/A2:2002 E
worldwide for CEN national Members.

Foreword
This document (EN 681-1:1996/A2:2002) has been prepared by Technical Committee CEN/TC 208
"Elastomeric seals for joints in pipework and pipelines", the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by September 2002, and conflicting national standards shall be withdrawn
at the latest by December 2003.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative annex ZA, which is an integral part of this document.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark,
Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal,
Spain, Sweden, Switzerland and the United Kingdom.
Foreword Insert the following immediately after the existing second paragraph:
‘This standard has been prepared under a mandate issued to CEN by the
European Commission and the European Free Trade Association and
supports Essential Requirements of EU Directives.
For the relationship with the EU Directives, see informative annex ZA,
which is an integral part of this standard.’
Page 4, 3 Change “classes” to “categories”.
Page 4, 3, Table 1 Change “class” to “category”.
Page 6, 6 Delete heading “6 Quality”.
Page 6, 6.1 Delete sub-clause.
Page 6, 6.2 Delete heading, insert “6 Factory production control”
Add before first sentence “The manufacturer shall establish and maintain
an effective documented factory production control system, so as to
achieve conformance with product standards”.
Page 7, 6.3 Delete this sub-clause.
Page 7, 10 c) Change “class” to “category”.
Page 7, 10 d) Delete.
Page 7, 10 e) Change to “d)”.
Page 7, 10 f) Change to “e)”.
Page 7, 10 g) Change to “f)”.
Page 7, 10 h) Change to “g)”.
Page 8, Table2 In second row delete “classes”, insert “categories”.
Page 9, Table3 In second row delete “classes”, insert “categories”.
Page 11, Table5 In second row delete “class”, insert “category”.
Annex ZA
(informative)
Clauses of this European standard addressing the provisions of the EU Construction
Products Directive
ZA.1 Scope and clauses of the European standard addressing the essential
characteristics of the EU Construction Products Directive
With reference to Clause 1, this Annex ZA has the same scope as Clause 1, excluding uses in
contact with water intended for human consumption.
This European standard has been prepared under a Mandate given to CEN by the European
Commission and the European Free Trade Association.
The clauses of this European standard shown in table ZA.1 below meet the requirements of the
Mandate given under the EU Construction Products Dire
...