EN 12697-23:2017
(Main)Bituminous mixtures - Test methods - Part 23: Determination of the indirect tensile strength of bituminous specimens
Bituminous mixtures - Test methods - Part 23: Determination of the indirect tensile strength of bituminous specimens
This draft European Standard specifies a test method for determining the (splitting) indirect tensile strength of cylindrical specimens of bituminous mixtures.
NOTE Determination of the water sensitivity of bituminous specimens in accordance with EN 12697-12 is based on determination of the indirect tensile strength in accordance with this test method.
Asphalt - Prüfverfahren - Teil 23: Bestimmung der indirekten Zugfestigkeit von Asphalt-Probekörpern
Dieser Europäische Norm-Entwurf legt ein Prüfverfahren zur Bestimmung der indirekten Zugfestigkeit (Spalt-zugfestigkeit) von zylindrischen Asphalt-Probekörpern fest.
ANMERKUNG Die Bestimmung der Wasserempfindlichkeit von Asphalt-Probekörpern nach EN 12697-12 beruht auf der Bestimmung der indirekten Zugfestigkeit nach dem vorliegenden Prüfverfahren.
Mélanges bitumineux - Méthode d'essais - Partie 23 : Détermination de la résistance à la traction indirecte des éprouvettes bitumineuses
Le présent projet de Norme européenne spécifie une méthode d’essai permettant de déterminer la résistance à la traction indirecte (fendage) d’éprouvettes cylindriques de mélanges bitumineux.
NOTE La détermination de la sensibilité à l'eau des éprouvettes bitumineuses selon l'EN 12697-12 est fondée sur la détermination de la résistance à la traction indirecte selon la présente méthode d’essai.
Bitumenske zmesi - Preskusne metode - 23. del: Ugotavljanje posredne natezne trdnosti bitumenskih preskušancev
Ta osnutek evropskega standarda določa preskusno metodo za ugotavljanje (ločevanje) posredne natezne trdnosti cilindričnih preskušancev iz bitumenskih mešanic.
OPOMBA: Ugotavljanje občutljivosti bitumenskih preskušancev na vodo v skladu s standardom EN 12697-12 temelji na ugotavljanju posredne natezne trdnosti v skladu s to preskusno metodo.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Bitumenske zmesi - Preskusne metode - 23. del: Ugotavljanje posredne natezne trdnosti bitumenskih preskušancevAsphalt - Prüfverfahren - Teil 23: Bestimmung der indirekten Zugfestigkeit von Asphalt-ProbekörpernMélanges bitumineux - Méthode d'essais - Partie 23 : Détermination de la résistance à la traction indirecte des éprouvettes bitumineusesBituminous mixtures - Test methods - Part 23: Determination of the indirect tensile strength of bituminous specimens93.080.20Materiali za gradnjo cestRoad construction materialsICS:Ta slovenski standard je istoveten z:EN 12697-23:2017SIST EN 12697-23:2018en,fr,de01-januar-2018SIST EN 12697-23:2018SLOVENSKI
STANDARDSIST EN 12697-23:20041DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 12697-23
November
t r s y ICS
{ uä r z rä t r Supersedes EN
s t x { yæ t uã t r r uEnglish Version
Bituminous mixtures æ Test methods æ Part
t uã Determination of the indirect tensile strength of bituminous specimens Mélanges bitumineux æ Méthode d 5essais æ Partie
t u ã Détermination de la résistance à la traction indirecte des éprouvettes bitumineuses
Asphalt æ Prüfverfahren æ Teil
t uã Bestimmung der indirekten Zugfestigkeit von AsphaltæProbekörpern This European Standard was approved by CEN on
t z August
t r s yä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
t r s y CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s t x { yæ t uã t r s y ESIST EN 12697-23:2018
— [5.2] Table 1 and Table 2 merged into one Table 1; — [6.2] addition of tolerances on diameter for specimens with diameter 80 mm and 120 mm; — [6.2] addition of maximum aggregate size for specimens with diameter 80 mm and 120 mm; — [6.5] introduction of requirements for specimen age; — [8] test temperature set to + 10 °C but opened by references from other standards; — [10] unit for ITS amended to kilopascals (kPa). Formula corrected accordingly; — [11] bullet g). Unit amended to kilopascals (kPa). According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 12697-23:2018
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.