EN 13263-1:2005
(Main)Silica fume for concrete - Part 1: Definitions, requirements and conformity criteria
Silica fume for concrete - Part 1: Definitions, requirements and conformity criteria
This European Standard applies to the silica fume which is a by-product of the smelting process used to produce silicon metal and ferro-silicon alloys.
This part of EN 13263 gives requirements for chemical and physical properties for silica fume to be used as a type II addition in concrete conforming to EN 206-1, or in mortars, grouts and other mixes. This part of EN 13263 also states conformity criteria and related rules.
EN 13263 does not give rules for the use of silica fume in concrete. Some rules are given in EN 206 1.
NOTE 1 Supplementary rules related to the use of silica fume in concrete may be given in non conflicting national standards for concrete.
NOTE 2 EN 206-1 (5.2.5.1 in the 2000 edition) provides conditions for national acceptance of silica fumes coming from calcium silicon alloys production or other silica fumes, not conforming completely to EN 13263, as type II additions for use in concrete.
Silikastaub für Beton - Teil 1: Definitionen, Anforderungen und Konformitätskriterien
Anwendungsbereich
Diese Europäische Norm gilt für Silikastaub, der ein Nebenprodukt des Schmelzprozesses zur Herstellung von Siliciummetall und
Dieser Teil der EN 13263 enthält Anforderungen an chemische und physikalische Eigenschaften von Silikastaub, der als Typ II-Zusatzstoff für Beton nach EN 206-1 oder für Mörtel, Einpressmörtel und andere Mischungen verwendet wird. Dieser Teil der EN 13263 enthält auch Konformitätskriterien und betreffende Regeln.
EN 13263 1 enthält keine Regeln zur Verwendung von Silikastaub in Beton. Einige Regeln sind in EN 206-1 aufgeführt.
ANMERKUNG 1 Zusätzliche Regeln für die Verwendung von Silikastaub in Beton können in nicht entgegenstehenden nationalen Normen für Beton angegeben sein.
ANMERKUNG 2 EN 206-1 (5.2.5.1 in der Ausgabe 2000) enthält die Bedingungen für die nationale Annahme von Silikastaub aus der Herstellung von Calciumsilicium-Legierungen oder anderem Silikastaub, der EN 13263 nicht vollständig entspricht, als Typ II-Zusatzstoff für Beton.
Fumée de silice pour béton - Partie 1: Définitions, exigences et critères de conformité
La présente Norme européenne concerne la fumée de silice, co-produit du processus de fusion permettant de
produire du silicium métal et des alliages de ferrosilicium.
La présente partie de l�EN 13263 présente les caractéristiques chimiques et physiques exigées pour de la
fumée de silice utilisée en tant que produit d�addition du béton de type II conforme à l�EN 206-1, des mortiers,
des coulis ou d�autres mélanges. La présente partie de l�EN 13263 présente également les critères de
conformité ainsi que les règles associées.
L�EN 13263 ne présente pas les règles d�utilisation de la fumée de silice dans le béton. Certaines règles sont
présentées dans l�EN 206-1.
NOTE 1 Des normes nationales non conflictuelles relatives au béton peuvent présenter des règles supplémentaires
relatives à l�utilisation de la fumée de silice dans le béton.
NOTE 2 L�EN 206-1 (5.2.5.1 de l�édition 2000) prévoit selon les termes d�un règlement, l�utilisation nationale, en tant
que produit d�addition du béton de type II, des fumées de silice provenant de la fabrication d�alliages de silico-calcium ou
d�autres fumées de silice conformes partiellement à l�EN 13263.
Mikro silika za beton – 1. del: Definicije, zahteve in merila skladnosti
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Silica fume for concrete - Part 1: Definitions, requirements and conformity criteriaMikro silika za beton – 1. del: Definicije, zahteve in merila skladnostiFumée de silice pour béton - Partie 1: Définitions, exigences et criteres de conformitéSilikastaub für Beton - Teil 1: Definitionen, Anforderungen und Konformitätskriterien91.100.30Beton in betonski izdelkiConcrete and concrete productsICS:SIST EN 13263-1:2005enTa slovenski standard je istoveten z:EN 13263-1:200501-september-2005SIST EN 13263-1:2005SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13263-1June 2005ICS 91.100.30English versionSilica fume for concrete - Part 1: Definitions, requirements andconformity criteriaFumée de silice pour béton - Partie 1: Définitions,exigences et critères de conformitéSilikastaub für Beton - Teil 1: Definitionen, Anforderungenund KonformitätskriterienThis European Standard was approved by CEN on 19 May 2005.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2005 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13263-1:2005: E
Release of dangerous substances and emission of radioactivity.16 Annex ZA (informative)
Clauses of this European Standard addressing the provisions of the EU Construction Products Directive.17 Bibliography.23
CR for a given sampling plan, the allowed probability of acceptance of silica fume with a characteristic value outside the specified characteristic value 3.3 autocontrol continuous statistical quality control of the silica fume based on the testing of samples taken by the manufacturer at point(s) of release from the silica fume production plant 3.4 autocontrol testing continual testing by the manufacturer of silica fume spot samples taken at the point(s) of release from the production plant
3.5 certificate of conformity to EN 13263-1 document issued under the rules of a certain scheme for the evaluation of conformity indicating that adequate confidence is provided that a silica fume is in conformity with this part of EN 13263 3.6 certification procedure by which a third party gives written assurance that a product, process or service conforms to specified requirements [EN 45020:1998] 3.7 certification body impartial body, governmental or non-governmental, possessing the necessary competence and responsibility to carry out conformity certification according to given rules of procedure and management 3.8 certified silica fume silica fume for which a certificate of conformity (see 3.5) has been issued 3.9 characteristic value value having a prescribed probability of not being attained in a hypothetical unlimited test series [ISO 8930: 1987] NOTE Equivalent to "fractile" which is defined in ISO 3534-1:1993. 3.10 conformity mark protected mark applied on the basis of the certificate of conformity (see 3.5) 3.11 control period period of production and dispatch identified for the evaluation of the autocontrol test results 3.12 densified silica fume silica fume that has been treated to increase the bulk density by particle agglomeration, the bulk density typically being above 500 kg/m3
3.15 factory production control permanent internal control of silica fume production exercised by the manufacturer including internal quality control and autocontrol testing NOTE The required activities are stated in 4.1 to 4.3 in EN 13263-2:2005. 3.16 further testing of samples testing according to 4.4 in EN 13263-2:2005 3.17 initial period immediate period after the first issuing of the certificate of conformity for a silica fume (see 5.6.1 in EN 13263-2:2005 for duration) 3.18 intitial type testing testing of the first audit sample according to 5.4 in EN 13263-2:2005 3.19 inspection body impartial body having the organization, staffing, competence and integrity to perform according to specified criteria functions such as assessing, recommending for acceptance and subsequent audit of manufacturers´ quality control operations, and selection and evaluation of products on site or in factories or elsewhere, according to specific criteria 3.20 new production plant production plant which is not already producing silica fume under the certification scheme 3.21 production plant facility used by a manufacturer for the production of silica fume: a) silicon metal or silicon alloy production plant; b) processing plant, for example for the selection, slurrifying, blending or densifying of silica fume. 3.22 quality control part of quality management focused on fulfilling quality requirements [EN ISO 9000:2000] 3.23 sampling plan specific plan which states the (statistical) sample size(s) to be used, the percentage Pk on which the characteristic value is based, and the allowable probability of acceptance CR
NOTE 2 Other names used for silica fume are condensed silica fume and microsilica. 3.25 silica fume slurry homogeneous, pH regulated liquid suspension of silica fume in water, typically with a dry content of 50 % by mass, corresponding to about 700 kg of silica fume per m³ of slurry 3.26 single result limit value value of a chemical or physical property which for any single test result – in the case of an upper limit is not to be exceeded or in the case of a lower limit is, as a minimum, to be reached 3.27 specified characteristic value characteristic value of a chemical or physical property which in the case of an upper limit is not to be exceeded or in the case of a lower limit is, as a minimum, to be reached NOTE Conformity with the specified characteristic values in this part of EN 13263 is verified by the methods in 7.2. 3.28 spot sample sample taken at the same time and from one and the
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.