iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 13263-1:2005/prA1

(Amendment)

Silica fume for concrete - Part 1: Definitions, requirements and conformity criteria

Silica fume for concrete - Part 1: Definitions, requirements and conformity criteria

Silikastaub für Beton - Teil 1: Definitionen, Anforderungen und Konformitätskriterien

Fumées de silice pour béton - Partie 1: Définitions, exigences et critères de conformité

Mikro silika za beton - 1. del: Definicije, zahteve in merila skladnosti

General Information

Status
Not Published
ICS
01.040.91 - Construction materials and building (Vocabularies)
91.100.30 - Concrete and concrete products
Technical Committee
CEN/TC 104 - Concrete ( performance, production, placing and compliance criteria )
Drafting Committee
CEN/TC 104/WG 9 - Silica fume for concrete
Current Stage
5060 - Closure of Vote - Formal Approval
Start Date
07-Jan-2009
Due Date
23-Dec-2009
Completion Date
07-Jan-2009
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
89/106/EEC - Construction products
Mandate
M/128 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on products for concrete, mortar and grout
Ref Project
SIST EN 13263-1:2005/kprA1:2008 - Silica fume for concrete - Part 1: Definitions, requirements and conformity criteria

Relations

Merged Into
EN 13263-1:2005+A1:2009 - Silica fume for concrete - Part 1: Definitions, requirements and conformity criteria
Effective Date
19-Jan-2023
Amends
EN 13263-1:2005 - Silica fume for concrete - Part 1: Definitions, requirements and conformity criteria
Effective Date
22-Dec-2008

Buy Standard

EN 13263-1:2005/kprA1:2008EN 13263-1:2005/kprA1:2008
PreviousNext
Draft
EN 13263-1:2005/kprA1:2008
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 13263-1:2005/kprA1:2008
01-oktober-2008
Mikro silika za beton - 1. del: Definicije, zahteve in merila skladnosti
Silica fume for concrete - Part 1: Definitions, requirements and conformity criteria
Silikastaub für Beton - Teil 1: Definitionen, Anforderungen und Konformitätskriterien
Fumée de silice pour béton - Partie 1: Définitions, exigences et critères de conformité
Ta slovenski standard je istoveten z: EN 13263-1:2005/prA1
ICS:
01.040.91 Gradbeni materiali in gradnja Construction materials and
(Slovarji) building (Vocabularies)
91.100.30 Beton in betonski izdelki Concrete and concrete
products
SIST EN 13263-1:2005/kprA1:2008 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 13263-1:2005/kprA1:2008

---------------------- Page: 2 ----------------------

SIST EN 13263-1:2005/kprA1:2008
EUROPEAN STANDARD
FINAL DRAFT
EN 13263-1:2005
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
August 2008
ICS 91.100.30

English Version
Silica fume for concrete - Part 1: Definitions, requirements and
conformity criteria
Fumées de silice pour béton - Partie 1: Définitions, Silikastaub für Beton - Teil 1: Definitionen, Anforderungen
exigences et critères de conformité und Konformitätskriterien
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 104.
This draft amendment A1, if approved, will modify the European Standard EN 13263-1:2005. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13263-1:2005/prA1:2008: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 13263-1:2005/kprA1:2008
EN 13263-1:2005/prA1:2008 (E)
Foreword
This document (EN 13263-1:2005/prA1:2008) has been prepared by Technical Committee CEN/TC 104
“Concrete and related products”, the secretariat of which is held by DIN.
This document is currently submitted to the Unique Acceptance Procedure.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 14487-1:2022(Main)
Sprayed concrete - Part 1: Definitions, specifications and conformity
SIST EN 14487-1:2023

This document is applicable to sprayed concrete to be used for repair and upgrading of structures, for new structures and for strengthening of ground.
This document covers:
-   classification related to consistence of wet mix;
-   environmental exposure classes; young, hardened and fibre reinforced concrete;
-   requirements for constituent materials, for concrete composition and for basic mix, for fresh and hardened concrete and all types of fibre reinforced sprayed concrete;
-   specification for designed and prescribed mixes;
-   conformity.
This document is applicable to wet mix as well as dry mix sprayed concrete. The substrates to which sprayed concrete can be applied include:
-   ground (rock and soil);
-   sprayed concrete;
-   different types of formwork;
-   structural components constituted of concrete, masonry and steel;
-   drainage materials;
-   insulating materials.
Additional or different requirements may be needed for applications not within this document, for instance-refractory uses.

  • Standard
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 934-2:2009+A1:2012(Main)
Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions, requirements, conformity, marking and labelling
SIST EN 934-2:2009+A1:2012

This European Standard specifies definitions and requirements for admixtures for use in concrete.
It covers admixtures for plain, reinforced and prestressed concrete which are used in site mixed, ready mixed concrete and precast concrete.
The performance requirements in this standard apply to admixtures used in concrete of normal consistence. They may not be applicable to admixtures intended for other types of concrete such as semi dry and earth moist mixes.
Provisions governing the practical application of admixtures in the production of concrete, i.e. requirements concerning composition, mixing, placing, curing etc. of concrete containing admixtures are not part of this standard.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 480-8:2012(Main)
Admixtures for concrete, mortar and grout - Test methods - Part 8: Determination of the conventional dry material content
SIST EN 480-8:2012

This European Standard describes a method for determining the conventional dry material content of an admixture.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 934-2:2009/FprA1(Amendment)
Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions, requirements, conformity, marking and labelling
SIST EN 934-2:2009/oprA1:2011

This European Standard specifies definitions and requirements for admixtures for use in concrete.
It covers admixtures for plain, reinforced and prestressed concrete which are used in site mixed, ready mixed concrete and precast concrete.
The performance requirements in this standard apply to admixtures used in concrete of normal consistence. They may not be applicable to admixtures intended for other types of concrete such as semi dry and earth moist mixes.
Provisions governing the practical application of admixtures in the production of concrete, i.e. requirements concerning composition, mixing, placing, curing etc. of concrete containing admixtures are not part of this standard.

  • Draft
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 934-2 rev(Main)
Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions, requirements, conformity, marking and labelling
oSIST prEN 934-2:2014

This European Standard specifies definitions and requirements for admixtures for use in concrete.
It covers admixtures for plain, reinforced and prestressed concrete which are used in site mixed, ready mixed concrete and precast concrete.
The performance requirements in this standard apply to admixtures used in concrete of normal consistence.
They may not be applicable to admixtures intended for other types of concrete such as semi-dry and earth moist mixes.
Provisions governing the practical application of admixtures in the production of concrete, i.e. requirements concerning composition, mixing, placing, curing etc. of concrete containing admixtures are not part of this standard.

  • Draft
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14487-1:2022(Main)
Sprayed concrete - Part 1: Definitions, specifications and conformity
SIST EN 14487-1:2023

This document is applicable to sprayed concrete to be used for repair and upgrading of structures, for new structures and for strengthening of ground.
This document covers:
-   classification related to consistence of wet mix;
-   environmental exposure classes; young, hardened and fibre reinforced concrete;
-   requirements for constituent materials, for concrete composition and for basic mix, for fresh and hardened concrete and all types of fibre reinforced sprayed concrete;
-   specification for designed and prescribed mixes;
-   conformity.
This document is applicable to wet mix as well as dry mix sprayed concrete. The substrates to which sprayed concrete can be applied include:
-   ground (rock and soil);
-   sprayed concrete;
-   different types of formwork;
-   structural components constituted of concrete, masonry and steel;
-   drainage materials;
-   insulating materials.
Additional or different requirements may be needed for applications not within this document, for instance-refractory uses.

  • Standard
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 934-2:2009+A1:2012(Main)
Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions, requirements, conformity, marking and labelling
SIST EN 934-2:2009+A1:2012

This European Standard specifies definitions and requirements for admixtures for use in concrete.
It covers admixtures for plain, reinforced and prestressed concrete which are used in site mixed, ready mixed concrete and precast concrete.
The performance requirements in this standard apply to admixtures used in concrete of normal consistence. They may not be applicable to admixtures intended for other types of concrete such as semi dry and earth moist mixes.
Provisions governing the practical application of admixtures in the production of concrete, i.e. requirements concerning composition, mixing, placing, curing etc. of concrete containing admixtures are not part of this standard.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 480-8:2012(Main)
Admixtures for concrete, mortar and grout - Test methods - Part 8: Determination of the conventional dry material content
SIST EN 480-8:2012

This European Standard describes a method for determining the conventional dry material content of an admixture.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 934-2:2009/FprA1(Amendment)
Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions, requirements, conformity, marking and labelling
SIST EN 934-2:2009/oprA1:2011

This European Standard specifies definitions and requirements for admixtures for use in concrete.
It covers admixtures for plain, reinforced and prestressed concrete which are used in site mixed, ready mixed concrete and precast concrete.
The performance requirements in this standard apply to admixtures used in concrete of normal consistence. They may not be applicable to admixtures intended for other types of concrete such as semi dry and earth moist mixes.
Provisions governing the practical application of admixtures in the production of concrete, i.e. requirements concerning composition, mixing, placing, curing etc. of concrete containing admixtures are not part of this standard.

  • Draft
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 934-2 rev(Main)
Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions, requirements, conformity, marking and labelling
oSIST prEN 934-2:2014

This European Standard specifies definitions and requirements for admixtures for use in concrete.
It covers admixtures for plain, reinforced and prestressed concrete which are used in site mixed, ready mixed concrete and precast concrete.
The performance requirements in this standard apply to admixtures used in concrete of normal consistence.
They may not be applicable to admixtures intended for other types of concrete such as semi-dry and earth moist mixes.
Provisions governing the practical application of admixtures in the production of concrete, i.e. requirements concerning composition, mixing, placing, curing etc. of concrete containing admixtures are not part of this standard.

  • Draft
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day