Vitreous and porcelain enamels - Low-voltage test for detecting and locating defects - Part 2: Slurry test for profiled surfaces (ISO 8289-2:2019)

This document specifies a low-voltage test method for detecting and locating defects (pores, cracks or pop-offs) that occur in enamel coatings of corrugated and/or undulated profiles and that extend down to the metal base.
The method is based on colour effects (optical method) and is applicable to the precise detection of defects and their exact position. It can be used for non-flat, more profiled shapes such as corrugated or undulated surfaces.
NOTE       The low-voltage test is a non-destructive test for detecting defects extending down to the metal base and is, therefore, completely different in comparison to the high-voltage test in accordance with ISO 2746.

Emaills und Emaillierungen - Niedrigspannungsprüfung zum Nachweis und Lokalisieren von Fehlstellen - Teil 2: Schlickermethode für profilierte Oberflächen (ISO 8289-2:2019)

Dieses Dokument legt ein Niedrigspannungsprüfverfahren zum Nachweis und Lokalisieren von Fehlstellen (Poren, Rissen oder Abplatzungen) in Email-Überzügen auf gewellten und/oder gesickten Profilen, die bis zum Grundmaterial durchgehen, fest.
Das Verfahren beruht auf Farbeffekten (optisches Verfahren) und gilt für den präzisen Nachweis von Fehlstellen und ihrer exakten Lage. Es kann für nicht ebene kompliziertere Formen, beispielsweise gewellte oder gesickte Flächen angewendet werden.
ANMERKUNG   Die Niedrigspannungsprüfung ist ein zerstörungsfreies Prüfverfahren für den Nachweis von Fehlstellen, die bis zum Grundmaterial reichen und ist daher vollständig verschieden im Vergleich zur Hochspannungsprüfung nach ISO 2746.

Émaux vitrifiés - Essai à basse tension pour la détection et la localisation des défauts - Partie 2: Essai à la barbotine pour surfaces profilées (ISO 8289-2:2019)

Le présent document spécifie une méthode d'essai à basse tension permettant de détecter et de localiser les défauts (pores, fissures ou éclats) qui apparaissent sur les revêtements émaillés de profilés ondulés et/ou présentant des sinuosités, et qui s'étendent jusqu'au métal de base.
Cette méthode est basée sur des effets de couleur (méthode optique) et elle peut être appliquée pour détecter les défauts avec précision et les localiser avec exactitude. Elle peut s'appliquer aux formes non planes très profilées telles que les surfaces ondulées ou présentant des sinuosités.
NOTE       L'essai à basse tension est un essai non destructif qui permet de détecter les défauts s'étendant jusqu'au métal de base, et qui, par conséquent, diffère complètement de l'essai sous haute tension conforme à l'ISO 2746.

Steklasti in porcelanski emajli - Nizkonapetostni preskus za odkrivanje in lociranje napak - 2. del: Preskus s tekočo zmesjo za profilirane površine (ISO 8289-2:2019)

Ta standard določa nizkonapetostno preskusno metodo za odkrivanje in lociranje napak (por, razpok ali luščenja), ki se pojavljajo v emajliranih prevlekah valovitih in/ali zobčastih profilov in segajo do kovinske podlage.

General Information

Status
Published
Publication Date
16-Apr-2019
Withdrawal Date
30-Oct-2019
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
17-Apr-2019
Completion Date
17-Apr-2019

Buy Standard

Standard
EN ISO 8289-2:2019
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 8289-2:2018
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 8289-2:2019
01-julij-2019
Steklasti in porcelanski emajli - Nizkonapetostni preskus za odkrivanje in lociranje
napak - 2. del: Preskus s tekočo zmesjo za profilirane površine (ISO 8289-2:2019)
Vitreous and porcelain enamels - Low-voltage test for detecting and locating defects -
Part 2: Slurry test for profile surfaces (ISO 8289-2:2019)
Emaills und Emaillierungen - Niedrigspannungsprüfung zum Nachweis und Lokalisieren
von Fehlstellen - Teil 2: Schlickermethode für profilierte Oberflächen (ISO 8289-2:2019)
Émaux vitrifiés - Essai à basse tension pour la détection et la localisation des défauts -
Partie 2: Essai à la barbotine pour surfaces profilées (ISO 8289-2:2019)
Ta slovenski standard je istoveten z: EN ISO 8289-2:2019
ICS:
25.220.50 Emajlne prevleke Enamels
SIST EN ISO 8289-2:2019 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 8289-2:2019

---------------------- Page: 2 ----------------------

SIST EN ISO 8289-2:2019


EN ISO 8289-2
EUROPEAN STANDARD

NORME EUROPÉENNE

April 2019
EUROPÄISCHE NORM
ICS 25.220.50
English Version

Vitreous and porcelain enamels - Low-voltage test for
detecting and locating defects - Part 2: Slurry test for
profiled surfaces (ISO 8289-2:2019)
Émaux vitrifiés - Essai à basse tension pour la Emaills und Emaillierungen -
détection et la localisation des défauts - Partie 2: Essai Niedrigspannungsprüfung zum Nachweis und
à la barbotine pour surfaces profilées (ISO 8289- Lokalisieren von Fehlstellen - Teil 2: Schlickermethode
2:2019) für profilierte Oberflächen (ISO 8289-2:2019)
This European Standard was approved by CEN on 21 March 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 8289-2:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 8289-2:2019
EN ISO 8289-2:2019 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 8289-2:2019
EN ISO 8289-2:2019 (E)
European foreword
This document (EN ISO 8289-2:2019) has been prepared by Technical Committee ISO/TC 107 "Metallic
and other inorganic coatings" in collaboration with Technical Committee CEN/TC 262 “Metallic and
other inorganic coatings, including for corrosion protection and corrosion testing of metals and alloys”
the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by October 2019, and conflicting national standards shall
be withdrawn at the latest by October 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text
...

SLOVENSKI STANDARD
oSIST prEN ISO 8289-2:2018
01-maj-2018
6WHNODVWLLQSRUFHODQVNLHPDMOL1L]NRQDSHWRVWQLSUHVNXV]DRGNULYDQMHLQORFLUDQMH
QDSDNGHO3UHVNXVVWHNRþR]PHVMR]DSURILOLUDQHSRYUãLQH ,62',6

Vitreous and porcelain enamels - Low-voltage test for detecting and locating defects -
Part 2: Slurry test for profile surfaces (ISO/DIS 8289-2:2018)
Emaills und Emaillierungen - Niedrigspannungsprüfung zum Nachweis und Lokalisieren
von Fehlstellen - Teil 2: Schlickermethode für profilierte Oberflächen (ISO/DIS 8289-
2:2018)
Émaux vitrifiés - Essai à basse tension pour la détection et la localisation des défauts -
Partie 2: Essai à la barbotine pour surfaces profilées (ISO/DIS 8289-2:2018)
Ta slovenski standard je istoveten z: prEN ISO 8289-2
ICS:
25.220.50 Emajlne prevleke Enamels
oSIST prEN ISO 8289-2:2018 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 8289-2:2018

---------------------- Page: 2 ----------------------
oSIST prEN ISO 8289-2:2018
DRAFT INTERNATIONAL STANDARD
ISO/DIS 8289-2
ISO/TC 107 Secretariat: KATS
Voting begins on: Voting terminates on:
2018-03-08 2018-05-31
Vitreous and porcelain enamels — Low-voltage test for
detecting and locating defects —
Part 2:
Slurry test for profile surfaces
Émaux vitrifiés - Essai à basse tension pour la détection et la localisation des défauts —
Partie 2: Méthode barbotine pour surfaces profilées
ICS: 25.220.50
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 8289-2:2018(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2018

---------------------- Page: 3 ----------------------
oSIST prEN ISO 8289-2:2018
ISO/DIS 8289-2:2018(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 8289-2:2018
ISO/DIS 8289-2:2018(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Test medium . 1
6 Apparatus . 2
6.1 Power source .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.