EN ISO 9094-2:2002

Small craft - Fire protection - Part 2: Craft with a hull length of over 15 m (ISO 9094-2:2002)

ISO 9094-2:2002 defines procedures to achieve a practical degree of fire protection, specifies portable fire-fighting equipment and sets requirements for fixed fire-fighting systems.
It applies to small craft of all types with a hull length greater than 15 m and up to and including 24 m

Kleine Wasserfahrzeuge - Brandschutz - Teil 2: Wasserfahrzeuge mit einer Rumpflänge über 15m (ISO 9094-2:2002)

Dieser Teil der Internationalen Norm beschreibt Verfahren, durch die eine praxisgerechte Form des Brandschutzes erreicht werden kann; er macht Angaben zu tragbaren Feuerlöschausrüstungen und legt Anforderungen an stationäre Feuerlöschanlagen fest.
Diese Norm gilt für alle Bauarten von kleinen Wasserfahrzeugen mit einer Rumpflänge LH über 15 m bis 24 m.

Petits navires - Protection contre l'incendie - Partie 2: Bateaux d'une longueur de coque supérieure à 15m (ISO 9094-2:2002)

L'ISO 9094-2:2002 définit des procédures destinées à obtenir un niveau pratique de protection contre l'incendie, spécifie les équipements portatifs de lutte contre l'incendie et établit des exigences pour les systèmes d'extinction fixes.
Elle est applicable aux bateaux d'une longueur de coque supérieure à 15 m et inférieure ou égale à 24 m.

Mala plovila – Požarna zaščita – 2. del: Plovila z dolžino trupa, večjo od 15 m (ISO 9094-2:2002)

General Information

• Status: Withdrawn
• Publication Date: 14-Nov-2002
• Withdrawal Date: 08-Dec-2015
• ICS: 47.080 - Small craft
• Technical Committee: CEN/SS T01 - Shipbuilding and maritime structures
• Drafting Committee: CEN/SS T01 - Shipbuilding and maritime structures
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 09-Dec-2015
• Directive: 2003/44/EC - Approximation of the laws, regulations and administrative provisions of the Member States relating to recreational craft
• Directive: 2013/53/EU - Directive 2013/53/EU of the European Parliament and of the Council of 20 November 2013 on recreational craft and personal watercraft and repealing Directive 94/25/EC
• Directive: 94/25/EC - Directive 94/25/EC of the European Parliament and of the Council of 16 June 1994 on the approximation of the laws, regulations and administrative provisions of the Member States relating to recreational craft
• Mandate: M/075 - Revised mandate to CEN for standardization in the field of recreational craft
• Ref Project: SIST EN ISO 9094-2:2003 - Small craft - Fire protection - Part 2: Craft with a hull length of over 15 m (ISO 9094-2:2002)

Relations

• Replaced By: EN ISO 9094:2015 - Small craft - Fire protection (ISO 9094:2015)
• Effective Date: 19-Sep-2012
• Revised: prEN ISO 9094 - Small craft - Fire protection (ISO/DIS 9094:2011)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
01-julij-2003
0DODSORYLOD±3RåDUQD]DãþLWD±GHO3ORYLOD]GROåLQRWUXSDYHþMRRGP,62

Small craft - Fire protection - Part 2: Craft with a hull length of over 15 m (ISO 9094-
2:2002)
Kleine Wasserfahrzeuge - Brandschutz - Teil 2: Wasserfahrzeuge mit einer Rumpflänge
über 15m (ISO 9094-2:2002)
Petits navires - Protection contre l'incendie - Partie 2: Bateaux d'une longueur de coque
supérieure a 15m (ISO 9094-2:2002)
Ta slovenski standard je istoveten z: EN ISO 9094-2:2002
ICS:
13.220.20
47.080
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 9094-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2002
ICS 47.080
English version
Small craft - Fire protection - Part 2: Craft with a hull length of
over 15 m (ISO 9094-2:2002)
Petits navires - Protection contre l'incendie - Partie 2: Kleine Wasserfahrzeuge - Brandschutz - Teil 2:
Bateaux d'une longueur de coque supérieure à 15m (ISO Wasserfahrzeuge mit einer Rumpflänge über 15m (ISO
9094-2:2002) 9094-2:2002)
This European Standard was approved by CEN on 12 November 2002.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2002 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 9094-2:2002 E
worldwide for CEN national Members.

CORRECTED  2003-02-05
Foreword
This document (EN ISO 9094-2:2002) has been prepared by Technical Committee ISO/TC 188
"Small craft" in collaboration with CMC.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by May 2003, and conflicting national standards
shall be withdrawn at the latest by May 2003.
This document has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association, and supports essential requirements of EU
Directive(s).
For relationship with EU Directive(s), see informative Annex ZB, which is an integral part of this
document.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium, Czech
Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg,
Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 9094-2:2002 has been approved by CEN as EN ISO 9094-2:2002 without any
modifications.
NOTE Normative references to International Standards are listed in Annex ZA (normative).
Annex ZA
(normative)
Normative references to international publications
with their relevant European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of
any of these publications apply to this European Standard only when incorporated in it by
amendment or revision. For undated references the latest edition of the publication referred to
applies (including amendments).
NOTE Where an International Publication has been modified by common modifications, indicated
by (mod.), the relevant EN/HD applies.
Publication Year Title EN Year
ISO 4589-3 1996 Plastics - Determination of burning EN ISO 4589-3 1996
behaviour by oxygen index - Part 3:
Elevated-temperature test
ISO 5923 1989 Fire protection - Fire extinguishing EN 25923 1993
media - Carbon dioxide
ISO 7840 1994 Small craft - Fire resistant fuel EN ISO 7840 1995
hoses
ISO 8665 1994 Small craft - Marine propulsion EN ISO 8665 1995
engines and systems - Power
measurements and declarations
ISO 8846 1990 Small craft - Electrical devices - EN 28846 1993
Protection against ignition of
surrounding flammable gases
ISO 10088 1992 Small craft - Permanently installed EN ISO 10088 2001
fuel systems and fixed fuel tanks
ISO 10133 2000 Small craft - Electrical systems - EN ISO 10133 2000
Extra low-voltage d.c. installations
ISO 10239 2000 Small craft - Liquefied petroleum EN ISO 10239 2000
gas (LPG) systems
ISO 11105 1997 Small craft - Ventilation of petrol EN ISO 11105 1997
engine and/or petrol tank
compartments
ISO 13297 2000 Small craft - Electrical systems - EN ISO 13297 2000
Alternating current installations
Annex ZB
(informative)
Clauses of this European Standard addressing essential requirements or
other provisions of EU Directives
This European Standard has been prepared under a mandate given to CEN by the European
Commission and the European Free Trade Association and supports essential requirements of
EU Directive 94/25/EC.
WARNING Other requirements and other EU Directives may be applicable to the
product(s) falling within the scope of this standard.
The following clauses of this standard are likely to support requirements of Directive 94/25/EC.
Compliance with these clauses of this standard provides one means of conforming with the
specific essential requirements of the Directive concerned and associated EFTA regulations.
Table ZB.1— Correspondence between this European Standard and EU Directives
Clause/subclause of this Corresponding Essential Comments
European Standard Requirement of Directive
94/25/EC
4.2, 4.3 Annex 1, Clause 3.8
4.5.2 Annex 1, Clause 5.1.1
3, 4, 5, 6, 7, 8, 9, Annex A Annex 1, Clause 5.6.1
5, 6, 7, 9 Annex 1, Clause 5.6.2
10, Annex B Annex 1, Clause 2.5
INTERNATIONAL ISO
STANDARD 9094-2
First edition
2002-11-15
Small craft — Fire protection —
Part 2:
Craft with a hull length of over 15 m
Petits navires — Protection contre l'incendie —
Partie 2: Bateaux d'une longueur de coque supérieure à 15 m

Reference number
ISO 9094-2:2002(E)
©
ISO 2002
ISO 9094-2:2002(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not
be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this
file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this
area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters
were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event
that a problem relating to it is found, please inform the Central Secretariat at the address given below.

©  ISO 2002
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic
or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body
in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.ch
Printed in Switzerland
ii © ISO 2002 – All rights reserved

ISO 9094-2:2002(E)
Contents Page
Foreword . iv
Introduction. v
1 Scope. 1
2 Normative references. 1
3 Terms and definitions. 2
4 Fire prevention . 3
4.1 Boat layout and design. 3
4.2 Escape routes. 4
4.3 Exits. 5
4.4 Cooking and heating appliances . 6
4.5 Engine and fuel spaces . 8
4.6 Electrical installations . 8
4.7 Fuel installations . 8
4.8 Liquefied petroleum gas (LPG) systems . 8
4.9 Ignition protection. 9
5 Fire-extinguishing equipment. 9
5.1 ISO classification of fires . 9
5.2 Suitability of extinguishing medium . 9
5.3 Requirements . 9
6 Portable fire extinguisher. 11
6.1 Purpose . 11
6.2 General requirements . 11
6.3 Type, capacity and number. 11
6.4 Location. 12
7 Fixed fire-extinguishing system . 12
7.1 Purpose . 12
7.2 Requirements . 12
7.3 Application. 13
7.4 Installation . 13
7.5 Discharge and control . 13
7.6 Operation . 14
7.7 Design concentration. 14
8 Displayed information. 14
9 Fire blanket . 16
10 Owner’s manual. 16
Annex A (normative) Fire test. 17
Annex B (normative) Instructions and information to be provided in the owner's manual. 18
Bibliography.
...