iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 10282:2001

(Main)

Magnetic materials - Method of test for the determination of surface insulation resistance of electrical sheet and strip

Magnetic materials - Method of test for the determination of surface insulation resistance of electrical sheet and strip

This European Standard is intended to define a measurement method for the determination of the characteristics of surface insulation resistance of magnetic sheet and strip.  This method is applicable to magnetic sheet and strip insulated on one or both surfaces and is suitable for manufacturing control in the application of insulation coatings.

Magnetische Werkstoffe - Meßverfahren zur Bestimmung des Oberflächenisolationswiderstandes von Elektroblech und -band

Zweck dieser Internationalen Norm ist es, ein Meßverfahren zur Bestimmung der Eigenschaften des Oberflächenisolationswiderstandes von Elektroblech und -band festzulegen. Dieses Verfahren ist für Elektroblech und -band anwendbar, welches auf einer oder beiden Seiten isoliert ist, und es ist zur Produktionskontrolle beim Auftragen der Isolationsbeschichtung geeignet.

Matériaux magnétiques - Méthode d'essai pour la détermination de la résistance d'isolement superficiel des tôles et bandes magnétiques

La présente norme européenne a pour objet de définir une méthode de mesure pour la détermination des caractéristiques de résistance d'isolement superficiel des tôles et feuillards magnétiques.  Cette méthode est applicable aux tôles ou feuillards magnétiques isolés sur une ou deux faces et est adaptée au contrôle de fabrication dans le cas d'application de revêtements isolants.

Magnetni materiali - Metoda preskušanja za ugotovitev upornosti površinske izolacije elektropločevin in trakov

General Information

Status
Withdrawn
Publication Date
20-Feb-2001
Withdrawal Date
30-Dec-2015
ICS
29.030 - Magnetic materials
Technical Committee
ECISS/TC 108 - Steel sheet and strip for electrical applications
Drafting Committee
ECISS/TC 24 - Electrical steel and strip qualities - Qualities, dimensions, tolerances and specific tests
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
31-Dec-2015
Completion Date
31-Dec-2015
Ref Project
SIST EN 10282:2001 - Magnetic materials - Method of test for the determination of surface insulation resistance of electrical sheet and strip

Buy Standard

EN 10282:2001EN 10282:2001
PreviousNext
Standard
EN 10282:2001
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.RYUãLQVNHMagnetische Werkstoffe - Meßverfahren zur Bestimmung des Oberflächenisolationswiderstandes von Elektroblech und -bandMatériaux magnétiques - Méthode d'essai pour la détermination de la résistance d'isolement superficiel des tôles et bandes magnétiquesMagnetic materials - Method of test for the determination of surface insulation resistance of elec
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 10251:2024(Main)
Magnetic materials - Methods of determination of the geometrical characteristics of electrical steel sheet and strip
SIST EN 10251:2024

This European Standard is intended to define the test methods used for the determination of the following geometrical characteristics of electrical steel sheet and strip:
—   edge wave (wave factor);
—   residual curvature;
—   edge camber;
—   deviation from the shearing line due to internal stresses;
—   burr height of cut edges.
This European Standard applies to electrical steel sheet and strip intended for the construction of magnetic circuits and corresponding to Clauses B2, C21 and C22 of IEC 60404-1:2000.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10342:2005(Main)
Magnetic materials - Classification of surface insulations of electrical steel sheet, strip and laminations
SIST EN 10342:2005

This document establishes a classification of surface insulations for electrical steel sheet, strip and laminations according to their general composition, relative insulating ability and function.
These surface insulations are either oxide layers or applied coatings.
The purpose of this classification is to create a nomenclature for the various types of surface insulations and to assist users of surface insulations by providing general information about the chemical nature and use of the surface insulations.
It is not the intent of this classification to specify insulation requirements in terms of specific values of surface insulation resistance. Such requirements are to be agreed between the purchaser and the steel producer, where applicable.
The classification is to be used in conjunction with the various specifications for cold rolled electrical steels (see the European Standards listed in Clause 2).

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10331:2003(Main)
Magnetic materials - Specification for sintered soft magnetic materials
SIST EN 10331:2003

This European Standard specifies some magnetic and mechanical properties of sintered soft magnetic metals which are used for components made by a powder metallurgical process only.
This standard does not apply to magnetically soft castings or to semi-finished products.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10265:1995(Main)
Magnetic materials - Specification for steel sheet and strip with specified mechanical properties and magnetic permeability
SIST EN 10265:1997

This European standard defines the grades of steel and strip with specified mechanical properties and magnetic permeability. In particular it gives the technological, mechanical and magnetic properties, the dimensional tolerances as well as the conditions of acceptance. This European Standard applies to material used for the poles and rims of rotating electrical machines. These materials correspond to clause D2 of IEC 404-1.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10251:2024(Main)
Magnetic materials - Methods of determination of the geometrical characteristics of electrical steel sheet and strip
SIST EN 10251:2024

This European Standard is intended to define the test methods used for the determination of the following geometrical characteristics of electrical steel sheet and strip:
—   edge wave (wave factor);
—   residual curvature;
—   edge camber;
—   deviation from the shearing line due to internal stresses;
—   burr height of cut edges.
This European Standard applies to electrical steel sheet and strip intended for the construction of magnetic circuits and corresponding to Clauses B2, C21 and C22 of IEC 60404-1:2000.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10342:2005(Main)
Magnetic materials - Classification of surface insulations of electrical steel sheet, strip and laminations
SIST EN 10342:2005

This document establishes a classification of surface insulations for electrical steel sheet, strip and laminations according to their general composition, relative insulating ability and function.
These surface insulations are either oxide layers or applied coatings.
The purpose of this classification is to create a nomenclature for the various types of surface insulations and to assist users of surface insulations by providing general information about the chemical nature and use of the surface insulations.
It is not the intent of this classification to specify insulation requirements in terms of specific values of surface insulation resistance. Such requirements are to be agreed between the purchaser and the steel producer, where applicable.
The classification is to be used in conjunction with the various specifications for cold rolled electrical steels (see the European Standards listed in Clause 2).

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10331:2003(Main)
Magnetic materials - Specification for sintered soft magnetic materials
SIST EN 10331:2003

This European Standard specifies some magnetic and mechanical properties of sintered soft magnetic metals which are used for components made by a powder metallurgical process only.
This standard does not apply to magnetically soft castings or to semi-finished products.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10265:1995(Main)
Magnetic materials - Specification for steel sheet and strip with specified mechanical properties and magnetic permeability
SIST EN 10265:1997

This European standard defines the grades of steel and strip with specified mechanical properties and magnetic permeability. In particular it gives the technological, mechanical and magnetic properties, the dimensional tolerances as well as the conditions of acceptance. This European Standard applies to material used for the poles and rims of rotating electrical machines. These materials correspond to clause D2 of IEC 404-1.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 22435:2024(Main)
Gas cylinders - Cylinder valves with integrated pressure regulators - Specification and type testing (ISO 22435:2024)
kSIST FprEN ISO 22435:2024

This document specifies design, type test methods, marking and instruction requirements for cylinder valves with integrated pressure regulators (VIPRs) intended to be fitted to gas cylinders, pressure drums or tubes or used as a main valve for bundles of cylinders that convey compressed, liquefied or dissolved gases.
These are requirements for VIPRs that are in addition to those given in the relevant closure standard, for example, in ISO 10297 for cylinder valves, in ISO 17871 for quick-release cylinder valves, in ISO 17879 for self-closing cylinder valves or in ISO 23826 for ball valves. For ISO 17871, these requirements are only applicable to quick-release cylinder valves types B, C, D and E.
NOTE 1        If the pressure regulating system of a VIPR is acting as the primary valve operating mechanism, it is covered by the relevant closure standard, e.g. ISO 10297, ISO 17871, ISO 17879 and ISO 23826. This also includes designs where closure of the primary valve operating mechanism of a VIPR is obtained by closing the seat of the pressure regulating system.
NOTE 2        If the primary valve operating mechanism of a VIPR is located at the low-pressure side of the pressure regulating system, it is covered by the relevant closure standard, e.g. ISO 10297, ISO 17871, ISO 17879 and ISO 23826.
NOTE 3        The term “pressure receptacle” is used within this document to cover instances where no differentiation is necessary between gas cylinders, bundles of cylinders, pressure drums and tubes.
This document does not apply to VIPRs for
a)       medical applications (see ISO 10524-3);
b)       liquefied petroleum gas (LPG);
c)        cryogenic applications.
NOTE 4        Additional requirements for a VIPR with a residual pressure device (RPD) are specified in ISO 15996.
NOTE 5        Additional requirements for pressure relief valves can exist in international/regional regulations/ standards.

  • Draft
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17015-1:2024(Main)
Electronic Public Procurement - Catalogue - Part 1: Choreographies
kSIST FprEN 17015-1:2024

The purpose of this deliverable is to specify and describe choreographies for exchanging an electronic product catalogue (“catalogues”) as part of the business processes in the pre-award and post-award area, so that catalogues can serve as a basis for placing orders as well as evaluating tenders. The key aspects covered by this choreography specification are:
-   processes for submitting catalogues from the selling to the buying side;
-   processes for submitting catalogue-related data as part of a tendering process;
-   processes integrating sell-side procurement systems.
This document does not apply to the transactions used in the specified choreographies. These transactions are specified in EN 17015 2. The relationship between the choreographies and the transaction is described in Clause 8.
The identifier of this choreographies document is EN 17015 1:2024.
How to claim compliance to this choreography is specified in 6.2.3.

  • Draft
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day