Gas cylinders - Non-refillable metallic gas cylinders - Specification and test methods - Amendment 1 (ISO 11118:2015/Amd 1:2019)

Gasflaschen - Metallische Einwegflaschen - Spezifikationen und Prüfverfahren - Änderung 1 (ISO 11118:2015/Amd 1:2019)

[Not available]

Bouteilles à gaz - Bouteilles à gaz métalliques non rechargeables - Spécifications et méthodes d'essai - Amendement 1 (ISO 11118:2015/Amd 1:2019)

Plinske jeklenke - Kovinske plinske jeklenke za enkratno polnitev - Specifikacija in preskusne metode - Dopolnilo A1 (ISO 11118:2015/Amd 1:2019)

General Information

Status
Published
Publication Date
14-Apr-2020
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Due Date
15-Apr-2020
Completion Date
15-Apr-2020

RELATIONS

Buy Standard

Amendment
EN ISO 11118:2016/A1:2020
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day
Amendment
EN ISO 11118:2016/oprA1:2018
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN ISO 11118:2016/A1:2020
01-junij-2020

Plinske jeklenke - Kovinske plinske jeklenke za enkratno polnitev - Specifikacija in

preskusne metode - Dopolnilo A1 (ISO 11118:2015/Amd 1:2019)

Gas cylinders - Non-refillable metallic gas cylinders - Specification and test methods -

Amendment 1 (ISO 11118:2015/Amd 1:2019)
Gasflaschen - Metallische Einwegflaschen - Spezifikationen und Prüfverfahren -
Änderung 1 (ISO 11118:2015/Amd 1:2019)

Bouteilles à gaz - Bouteilles à gaz métalliques non rechargeables - Spécifications et

méthodes d'essai - Amendement 1 (ISO 11118:2015/Amd 1:2019)
Ta slovenski standard je istoveten z: EN ISO 11118:2015/A1:2020
ICS:
23.020.35 Plinske jeklenke Gas cylinders
SIST EN ISO 11118:2016/A1:2020 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 11118:2016/A1:2020
---------------------- Page: 2 ----------------------
SIST EN ISO 11118:2016/A1:2020
EN ISO 11118:2015/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
April 2020
EUROPÄISCHE NORM
ICS 23.020.35
English Version
Gas cylinders - Non-refillable metallic gas cylinders -
Specification and test methods - Amendment 1 (ISO
11118:2015/Amd 1:2019)

Bouteilles à gaz - Bouteilles à gaz métalliques non Gasflaschen - Metallische Einwegflaschen -

rechargeables - Spécifications et méthodes d'essai - Spezifikationen und Prüfverfahren - Änderung 1 (ISO

Amendement 1 (ISO 11118:2015/Amd 1:2019) 11118:2015/Amd 1:2019)

This amendment A1 modifies the European Standard EN ISO 11118:2015; it was approved by CEN on 21 October 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of

this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references

concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN

member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation

under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the

same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,

Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and

United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11118:2015/A1:2020 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 11118:2016/A1:2020
EN ISO 11118:2015/A1:2020 (E)
Contents Page

European foreword ....................................................................................................................................................... 3

---------------------- Page: 4 ----------------------
SIST EN ISO 11118:2016/A1:2020
EN ISO 11118:2015/A1:2020 (E)
European foreword

This document (EN ISO 11118:2015/A1:2020) has been prepared by Technical Committee ISO/TC 58

"Gas cylinders" in collaboration with Technical Committee CEN/TC 23 “Transportable gas cylinders” the

secretariat of which is held by BSI.

This Amendment to the European Standard EN ISO 11118:2015 shall be given the status of a national

standard, either by publication of an identical text or by endorsement, at the latest by October 2020,

and conflicting national standards shall be withdrawn at the latest by October 2020.

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. CEN shall not be held responsible for identifying any or all such patent rights.

According to the CEN-CENELEC Internal Regulations, the national standards organizations of the

following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,

Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,

Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of

North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the

United Kingdom.
Endorsement notice

The text of ISO 11118:2015/Amd 1:2019 has been approved by CEN as EN ISO 11118:2015/A1:2020

without any modification.
---------------------- Page: 5 ----------------------
SIST EN ISO 11118:2016/A1:2020
---------------------- Page: 6 ----------------------
SIST EN ISO 11118:2016/A1:2020
INTERNATIONAL ISO
STANDARD 11118
Second edition
2015-09-15
AMENDMENT 1
2019-10
Gas cylinders — Non-refillable
metallic gas cylinders — Specification
and test methods
AMENDMENT 1
Bouteilles à gaz — Bouteilles à gaz métalliques non rechargeables —
Spécifications et méthodes d'essai
AMENDEMENT 1
Reference number
ISO 11118:2015/Amd.1:2019(E)
ISO 2019
---------------------- Page: 7 ----------------------
SIST EN ISO 11118:2016/A1:2020
ISO 11118:2015/Amd.1:2019(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2019

All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may

be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting

on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address

below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 11118:2016/A1:2020
ISO 11118:2015/Amd.1:2019(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards

bodies (ISO member bodies). The work of preparing International Standards is normally carried out

through ISO technical committees. Each member body interested in a subject for which a technical

committee has been established has the right to be represented on that committee. International

organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.

ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of

electrotechnical standardization.

The procedures used to develop this document and those intended for its further maintenance are

described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the

different types of ISO documents should be noted. This document was drafted in accordance with the

editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/directives).

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of

any patent rights identified during the development of the document will be in the Introduction and/or

on the ISO list of patent declarations received (see www .iso .org/patents).

Any trade name used in this document is information given for the convenience of users and does not

constitute an endorsement.

For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and

expressions related to conformity assessment, as well as information about ISO's adherence to the

World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see www .iso

.org/iso/foreword .html.

This document was prepared by Technical Committee ISO/TC 58, Gas cylinders, Subcommittee SC 3,

Cylinder design.

Any feedback or questions on this document should be directed to the user’s national standards body. A

complete listing of these bodies can be found at www .iso .org/members .html.
© ISO 2019 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 11118:2016/A1:2020
---------------------- Page: 10 ----------------------
SIST EN ISO 11118:2016/A1:2020
ISO 11118:2015/Amd.1:2019(E)
Gas cylinders — Non-refillable metallic gas cylinders —
Specification and test methods
AMENDMENT 1
Normative references
Add the following new reference:
ISO 14732, Welding personnel — Qualification testing of weld
...

SLOVENSKI STANDARD
SIST EN ISO 11118:2016/oprA1:2018
01-oktober-2018

Plinske jeklenke - Kovinske plinske jeklenke za enkratno polnitev - Specifikacija in

preskusne metode - Dopolnilo A1 (ISO 11118:2015:DAM 1:2018)

Gas cylinders - Non-refillable metallic gas cylinders - Specification and test methods

(ISO 11118:2015:DAM 1:2018)
Gasflaschen - Metallische Einwegflaschen - Spezifikationen und Prüfverfahren -
Änderung 1 (ISO 11118:2015/DAM 1:2018)

Bouteilles à gaz - Bouteilles à gaz métalliques non rechargeables - Spécifications et

méthodes d'essai (ISO 11118:2015:DAM 1:2018)
Ta slovenski standard je istoveten z: EN ISO 11118:2015/prA1
ICS:
23.020.35 Plinske jeklenke Gas cylinders
SIST EN ISO 11118:2016/oprA1:2018 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 11118:2016/oprA1:2018
---------------------- Page: 2 ----------------------
SIST EN ISO 11118:2016/oprA1:2018
DRAFT AMENDMENT
ISO 11118:2015/DAM 1
ISO/TC 58/SC 3 Secretariat: BSI
Voting begins on: Voting terminates on:
2018-08-03 2018-10-26
Gas cylinders — Non-refillable metallic gas cylinders —
Specification and test methods
AMENDMENT 1

Bouteilles à gaz — Bouteilles à gaz métalliques non rechargeables — Spécifications et méthodes d'essai

AMENDEMENT 1
ICS: 23.020.35
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO 11118:2015/DAM 1:2018(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. ISO 2018
---------------------- Page: 3 ----------------------
SIST EN ISO 11118:2016/oprA1:2018
ISO 11118:2015/DAM 1:2018(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2018

All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may

be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting

on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address

below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved
---------------------- Page: 4 ----------------------
SIST EN ISO 11118:2016/oprA1:2018
ISO 11118:2015/DAM 1:2018(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards

bodies (ISO member bodies). The work of preparing International Standards is normally carried out

through ISO technical committees. Each member body interested in a subject for which a technical

committee has been established has the right to be represented on that committee. International

organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.

ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of

electrotechnical standardization.

The procedures used to develop this document and those intended for its further maintenance are

described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the

different types of ISO documents should be noted. This document was drafted in accordance with the

editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/directives).

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of

any patent rights identified during the development of the document will be in the Introduction and/or

on the ISO list of patent declarations received (see www .iso .org/patents).

Any trade name used in this document is information given for the convenience of users and does not

constitute an endorsement.

For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and

expressions related to conformity assessment, as well as information about ISO's adherence to the

World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following

URL: www .iso .org/iso/foreword .html.

This document was prepared by Technical Committee ISO/TC 58, Gas cylinders, Subcommittee SC 3,

Cylinder design.
© ISO 2018 – All rights reserved iii
---------------------- Page: 5 ----------------------
SIST EN ISO 11118:2016/oprA1:2018
---------------------- Page: 6 ----------------------
SIST EN ISO 11118:2016/oprA1:2018
ISO 11118:2015/DAM 1:2018(E)
Gas cylinders — Non-refillable metallic gas cylinders —
Specification and test methods
AMENDMENT 1
Normative references
Add the following standard:

ISO 14732, Welding personnel — Qualification testing of welding operators and weld setters for mechanized

and automatic welding of metallic materials
8.1.1.2.1
Replace the text with the following:

The welding of longitudinal and circumferential seams shall be by a semi-automatic or automatic

process.

The longitudinal seam weld, if any, shall be of the butt type weld joint as illustrated in Figure 1 a).

The circumferential seam(s), if any, shall be as illustrated in Figure 1 a), b), c), or d).

Welded joints shall have strength greater than the tensile strength of the finished cylindrical wall.

The welding procedure and operator qualifications shall include, as a minimum, welds representative

of those made in production representing the variables in the materials and the process. Requalifying

of the procedures and operators shall be required if there is a change in any of the essential variables as

specified in 8.1.1.2.2.7.
a) Butt weld joint c) Butt weld joint with backing ring
b) Offset weld d) Joggle weld
Figure 1 — Weld joints
8.1.1.2.2.1
Replace the text with the following:

a) All welders, welding operators and welding procedures shall be approved by meeting the

requirements of 8.1.1.2.2 through 8.1.1.2.2.9 or those given in ISO 9806-1, ISO 14732, ISO 15613,

and ISO 15614-1.
© ISO 2018 – All rights reserved 1
---------------------- Page: 7 ----------------------
SIST EN ISO 11118:2016/oprA1:2018
ISO 11118:2015/DAM 1:2018(E)

b) Records of welders and welding operator qualifications and welding procedure qualification-shall

be kept on file by the manufacturer.

c) Welding procedure specification approval tests shall be carried out such that the welds shall be

representative of those made in production.

d) Welders, welding operators and welding procedures shall pass the approval tests for the specific

type of work and procedure specification concerned.
8.1.1.2.2.7, first paragraph
Replace the paragraph with the following:

The welding procedure specification and welder qualification shall be tested and approved when any of

the following changes are made, if not already covered:
9.2.2
Replace the text with the following:

For carbon steel, a check analysis shall be performed by the cylinder manufacturer on m

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.