EN 1024:2012
(Main)Clay roofing tiles for discontinuous laying - Determination of geometric characteristics
Clay roofing tiles for discontinuous laying - Determination of geometric characteristics
This European standard specifies the methods for determining the geometric characteristics of clay tiles as defined in EN 1304, Clay roofing tiles and fittings Product definitions and specifications.
Tondachziegle für überlappende Verlegung - Bestimmung der geometrischen Kennwerte
Diese Europäische Norm legt die Prüfverfahren für die Bestimmung der geometrischen Kennwerte von
Tondachziegeln fest, die in EN 1304, Dachziegel und Formziegel — Begriffe und Produktanforderungen
definiert sind.
Tuiles de terre cuite pour pose en discontinu - Détermination des caractéristiques géométriques
La présente Norme européenne spécifie les méthodes de détermination des caractéristiques géométriques des tuiles en terre cuite telles que définies dans l'EN 1304, Tuiles et accessoires en terre cuite - Définitions et spécifications des produits.
Opečni strešniki - Ugotavljanje geometrijskih značilnosti
Ta evropski standard določa metode za ugotavljanje geometrijskih značilnosti opečnih strešnikov, iz standarda EN 1304, Opečni strešniki in fazonski kosi, Definicije in specifikacije izdelkov.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Tondachziegle für überlappende Verlegung - Bestimmung der geometrischen KennwerteTuiles de terre cuite pour pose en discontinu - Détermination des caractéristiques géométriquesClay roofing tiles for discontinuous laying - Determination of geometric characteristics91.100.25Ceramic building productsICS:Ta slovenski standard je istoveten z:EN 1024:2012SIST EN 1024:2012en,fr,de01-julij-2012SIST EN 1024:2012SLOVENSKI
STANDARDSIST EN 1024:19981DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1024
March 2012 ICS 91.100.25 Supersedes EN 1024:1997English Version
Clay roofing tiles for discontinuous laying - Determination of geometric characteristics
Tuiles de terre cuite pour pose en discontinu - Détermination des caractéristiques géométriques
Tondachziegle für überlappende Verlegung - Bestimmung der geometrischen Kennwerte This European Standard was approved by CEN on 22 January 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1024:2012: ESIST EN 1024:2012
Example of twist measurement device for tiles with sidelock and headlock, tiles with sidelock only and overlapping tiles . 18 SIST EN 1024:2012
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 1024:2012
5.1.1.1 Apparatus The tests are made with a measuring apparatus with a precision of at least one millimetre. 5.1.1.2 Procedure After removing any surplus clay from the edges, the measurements shall be taken, both transversely and longitudinally along the centre of the tile unless another measuring position has been specified by the manufacturer (see Figure 1). The dimensions are expressed to the nearest whole millimetre.
Key 1 tile Figure 1 – Principle for measuring individual dimensions 5.1.1.3 Expression of results The arithmetic means of the lengths and widths of the 10 tested tiles and the differences expressed as a percentage of these mean values in relation to the values A and B declared by the manufacturer shall be calculated and noted in the test report.
1) EN 1304 specifies to which type of tiles these measurements apply. SIST EN 1024:2012
Key 1 mean cover length 1.1 open position 1.2 closed position 2 mean cover width 2.1 open position 2.2 closed position Figure 2 – Principle for measuring cover dimensions 5.1.2.2 Number of test pieces 24 tiles are required for the measurements. 5.1.2.3 Apparatus The tests are carried out with a measuring apparatus with a precision of at least 1 mm. SIST EN 1024:2012
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.