EN 13286-52:2004

Unbound and hydraulically bound mixtures - Part 52: Method for the manufacture of test specimens of hydraulically bound mixtures using vibrocompression

This document specifies a test method for making specimens of hydraulically bound mixture to a predetermined density and water content by vibrocompression compaction.
This document is appropriate to mixtures, or that part of a mixture, containing aggregate up to a maximum size of 31,5 mm.
This method is not applicable to mixtures with a high proportion of fines.

Ungebundene und hydraulisch gebundene Gemische - Teil 52: Verfahren zur Herstellung von Probekörpern von hydraulisch gebundenen Gemischen durch Vibro-Druck (Rütteln und Druck)

Diese Europäische Norm legt das Verfahren zur Herstellung von Probekörpern mit bestimmten, zuvor festgelegten Werten für Dichte und Wassergehalt durch eine Verdichtung unter kombinierter Anwendung von Rütteln und Druck fest.
Diese Europäische Norm ist für Gemische oder den Teil eines Gemisches geeignet, mit einer Korngröße von maximal 31,5 mm geeignet.
ANMERKUNG   Das Verfahren ist nicht auf Gemische mit hohem Feinkornanteil anwendbar.

Mélanges traités et mélanges non traités aux liants hydrauliques - Partie 52: Méthode de confection par vibrocompression des éprouvettes de matériaux traités aux liants hydrauliques

Le présent document spécifie une méthode de fabrication d'éprouvettes de masse volumique apparente et de teneur en eau prédéfinies à l'aide du compactage par vibrocompression.
Ce document s'applique aux mélanges, ou à la partie d'un mélange, dont la granulométrie nominale est de 31,5 mm.
Cette méthode ne s'applique pas aux mélanges contenant une forte proportion de fines.

Nevezane in hidravlično vezane zmesi – 52. del: Postopek (metoda) za pripravo preizkušancev iz hidravlično vezanih zmesi, pripravljenih z vibracijskim zgoščevalnikom

General Information

• Status: Published
• Publication Date: 21-Dec-2004
• Withdrawal Date: 29-Jun-2005
• ICS: 93.080.20 - Road construction materials
• Technical Committee: CEN/TC 227 - Road materials
• Drafting Committee: CEN/TC 227/WG 4 - Hydraulic bound and unbound mixtures (including byproducts and waste materials)
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 14-Feb-2022
• Ref Project: SIST EN 13286-52:2005 - Unbound and hydraulically bound mixtures - Part 52: Method for the manufacture of test specimens of hydraulically bound mixtures using vibrocompression

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 13286-52:2005
01-junij-2005
Nevezane in hidravlično vezane zmesi – 52. del: Postopek (metoda) za pripravo
preizkušancev iz hidravlično vezanih zmesi, pripravljenih z vibracijskim
zgoščevalnikom
Unbound and hydraulically bound mixtures - Part 52: Method for the manufacture of test
specimens of hydraulically bound mixtures using vibrocompression
Ungebundene und hydraulisch gebundene Gemische - Teil 52: Verfahren zur Herstellung
von Probekörpern von hydraulisch gebundenen Gemischen durch Vibro-Druck (Rütteln
und Druck)
Mélanges traités et mélanges non traités aux liants hydrauliques - Partie 52: Méthode de
confection par vibrocompression des éprouvettes de matériaux traités aux liants
hydrauliques
Ta slovenski standard je istoveten z: EN 13286-52:2004
ICS:
93.080.20 Materiali za gradnjo cest Road construction materials
SIST EN 13286-52:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 13286-52:2005

---------------------- Page: 2 ----------------------
SIST EN 13286-52:2005
EUROPEAN STANDARD
EN 13286-52
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2004
ICS 93.080.20
English version
Unbound and hydraulically bound mixtures - Part 52: Method for
the manufacture of test specimens of hydraulically bound
mixtures using vibrocompression
Mélanges traités et mélanges non traités aux liants Ungebundene und hydraulisch gebundene Gemische - Teil
hydrauliques - Partie 52: Méthode de confection par 52: Verfahren zur Herstellung von Probekörpern von
vibrocompression des éprouvettes de matériaux traités aux hydraulisch gebundenen Gemischen durch Vibro-Druck
liants hydrauliques (Rütteln und Druck)
This European Standard was approved by CEN on 12 November 2004.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2004 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13286-52:2004: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 13286-52:2005
EN 13286-52:2004 (E)
Contents
Page
Foreword.3
1 Scope .5
2 Terms and definitions .5
3 Principle.5
4 Dimensions of the specimens.5
5 Apparatus .6
6 Procedure .7
7 Storage.8
8 Test report .8


2

---------------------- Page: 4 ----------------------
SIST EN 13286-52:2005
EN 13286-52:2004 (E)
Foreword
This document (EN 13286-52:2004) has been prepared by Technical Committee CEN/TC 227 “Road
materials”, the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publicati
...

SLOVENSKI STANDARD
SIST EN 13286-52:2005
01-junij-2005
1HYH]DQHLQKLGUDYOLþQRYH]DQH]PHVL±GHO3RVWRSHNPHWRGD]DSULSUDYR
SUHL]NXãDQFHYL]KLGUDYOLþQRYH]DQLK]PHVLSULSUDYOMHQLK]YLEUDFLMVNLP
]JRãþHYDOQLNRP
Unbound and hydraulically bound mixtures - Part 52: Method for the manufacture of test
specimens of hydraulically bound mixtures using vibrocompression
Ungebundene und hydraulisch gebundene Gemische - Teil 52: Verfahren zur
Herstellung von Probekörpern von hydraulisch gebundenen Gemischen durch Vibro-
Druck (Rütteln und Druck)
Mélanges traités et mélanges non traités aux liants hydrauliques - Partie 52: Méthode de
confection par vibrocompression des éprouvettes de matériaux traités aux liants
hydrauliques
Ta slovenski standard je istoveten z: EN 13286-52:2004
ICS:
93.080.20 Materiali za gradnjo cest Road construction materials
SIST EN 13286-52:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 13286-52:2005

---------------------- Page: 2 ----------------------

SIST EN 13286-52:2005
EUROPEAN STANDARD
EN 13286-52
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2004
ICS 93.080.20
English version
Unbound and hydraulically bound mixtures - Part 52: Method for
the manufacture of test specimens of hydraulically bound
mixtures using vibrocompression
Mélanges traités et mélanges non traités aux liants Ungebundene und hydraulisch gebundene Gemische - Teil
hydrauliques - Partie 52: Méthode de confection par 52: Verfahren zur Herstellung von Probekörpern von
vibrocompression des éprouvettes de matériaux traités aux hydraulisch gebundenen Gemischen durch Vibro-Druck
liants hydrauliques (Rütteln und Druck)
This European Standard was approved by CEN on 12 November 2004.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2004 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13286-52:2004: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 13286-52:2005
EN 13286-52:2004 (E)
Contents
Page
Foreword.3
1 Scope .5
2 Terms and definitions .5
3 Principle.5
4 Dimensions of the specimens.5
5 Apparatus .6
6 Procedure .7
7 Storage.8
8 Test report .8


2

---------------------- Page: 4 ----------------------

SIST EN 13286-52:2005
EN 13286-52:2004 (E)
Foreword
This document (EN 13286-52:2004) has been prepared by Technical Committee CEN/TC 227 “Road
materials”, the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publ
...