EN 15073:2013
(Main)Chemicals used for treatment of swimming pool water - Sodium dichloroisocyanurate, dihydrate
Chemicals used for treatment of swimming pool water - Sodium dichloroisocyanurate, dihydrate
This European Standard is applicable to sodium dichloroisocyanurate, dihydrate used directly or used to prepare commercial formulations for disinfecting swimming pool water. It describes the characteristics of sodium dichloroisocyanurate, dehydrate and specifies the requirements and the corresponding test methods for sodium dichloroisocyanurate, dihydrate. It gives information on its use for treating swimming pool water. It also determines the rules relating to safe handling and use (see Annex B).
Produkte zur Aufbereitung von Schwimm- und Badebeckenwasser - Natriumdichlorisocyanurat-Dihydrat
Diese Europäische Norm gilt für Natriumdichlorisocyanurat-Dihydrat, das direkt zur Desinfektion von Schwimm und Badebeckenwasser oder zum Herstellen handelsüblicher Zubereitungen für diesen Zweck verwendet wird. Sie beschreibt die Eigenschaften von Natriumdichlorisocyanurat-Dihydrat und legt die Anforderungen sowie die entsprechenden Prüfverfahren für Natriumdichlorisocyanurat-Dihydrat fest. Sie enthält Angaben zur Anwendung von Natriumdichlorisocyanurat-Dihydrat in der Aufbereitung von Schwimm- und Badebeckenwasser. Sie legt darüber hinaus Regeln für die sichere Handhabung und Benutzung fest (siehe Anhang B).
Produits chimiques utilisés pour le traitement de l'eau des piscines - Dichloroisocyanurate de sodium, dihydraté
La présente Norme européenne est applicable au dichloroisocyanurate de sodium dihydraté utilisé directement ou pour préparer des formulations commerciales pour désinfecter l’eau des piscines. Elle décrit les caractéristiques du dichloroisocyanurate de sodium dihydraté et spécifie les exigences et les méthodes d’essai correspondant à ce produit. Elle donne des informations pour son utilisation dans le traitement de l’eau des piscines. Elle fixe également les règles relatives à la sécurité d’emploi et de manipulation (voir Annexe B).
Kemikalije, ki se uporabljajo za pripravo bazenske vode - Natrijev diklorizocianurat, dehidriran
Ta evropski standard se uporablja za dehidriran natrijev diklorizocianurat, ki se lahko uporablja neposredno ali za pripravo komercialnih oblik za dezinfekcijo bazenske vode. Opisuje značilnosti dehidriranega natrijevega diklorizocianurata ter določa zahteve in ustrezne preskusne metode zanj. Podaja informacije za uporabo dehidriranega natrijevega diklorizocianurata pri pripravi bazenske vode. Določa tudi pravila za varno ravnanje in uporabo (glej dodatek B).
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kemikalije, ki se uporabljajo za pripravo bazenske vode - Natrijev diklorizocianurat, dehidriranProdukte zur Aufbereitung von Schwimm- und Badebeckenwasser - Natriumdichlorisocyanurat-DihydratProduits chimiques utilisés pour le traitement de l'eau des piscines - Dichloroisocyanurate de sodium, dihydratéChemicals used for treatment of swimming pool water - Sodium dichloroisocyanurate, dihydrate71.100.80Chemicals for purification of water13.060.25Voda za industrijsko uporaboWater for industrial useICS:Ta slovenski standard je istoveten z:EN 15073:2013SIST EN 15073:2013en,fr,de01-julij-2013SIST EN 15073:2013SLOVENSKI
STANDARDSIST EN 15073:2006+A1:20081DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 15073
May 2013 ICS 71.100.80 Supersedes EN 15073:2006+A1:2008English Version
Chemicals used for treatment of swimming pool water - Sodium dichloroisocyanurate, dihydrate
Produits chimiques utilisés pour le traitement de l'eau des piscines - Dichloroisocyanurate de sodium, dihydraté
Produkte zur Aufbereitung von Schwimm- und Badebeckenwasser - Natriumdichlorisocyanurat-Dihydrat This European Standard was approved by CEN on 28 March 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15073:2013: ESIST EN 15073:2013
General information on sodium dichloroisocyanurate, dihydrate . 12 Annex B (normative)
General rules relating to safety . 14 Bibliography. 15
3 Foreword This document (EN 15073:2013) has been prepared by Technical Committee CEN/TC 164 “Water supply”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2013, and conflicting national standards shall be withdrawn at the latest by November 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 15073:2006+A1:2008. Significant technical differences between this edition and EN 15073:2006+A1:2008 are as follows: Replacement of warning and safety precautions notes by labelling according to Regulation (EC) No 1272/2008. According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
5 1 Scope This European Standard is applicable to sodium dichloroisocyanurate, dihydrate used directly or used to prepare commercial formulations for disinfecting swimming pool water. It describes the characteristics of sodium dichloroisocyanurate, dehydrate and specifies the requirements and the corresponding test methods for sodium dichloroisocyanurate, dihydrate. It gives information on its use for treating swimming pool water. It also determines the rules relating to safe handling and use (see Annex B). 2 Normative reference The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 12932:2008, Chemicals used for treatment of water intended for human consumption — Chemicals for emergency use — Sodium dichloroisocyanurate, dihydrate 3 Description 3.1 Identification 3.1.1 Chemical name 1-sodium, 3, 5-dichloro-1,3,5-triazine-2, 4, 6-trione dihydrate. 3.1.2 Synonym or common name Sodium dichloroisocyanurate, dihydrate. Troclosene sodium, dihydrate 3.1.3 Relative molecular mass 256,02. 3.1.4 Empirical formula C3N3O3Cl2Na.2H2O. SIST EN 15073:2013
3.1.6 CAS Registry Number 1) 51580-86-0. 3.1.7 EINECS reference 2) Not listed. 3.2 Commercial form The product is available in various granular forms. 3.3 Physical properties 3.3.1 Appearance and odour The product is a white granular solid with chlorinous odour. 3.3.2 Density The bulk density of the product is approximately 0,9 g/cm3. 3.3.3 Solubility in water The solubility of the product in water is 291 g/l at 25 °C. 3.3.4 Vapour pressure Not applicable. 3.3.5 Boiling point at 100 kPa 3) Not applicable, the product decomposes before fusion.
1) Chemical Abstracts Service Registry Number. 2) European Inventory of Existing Commercial Chemical Substances. 3) 100 kPa = 1 bar. SIST EN 15073:2013
7 3.3.6 Melting point Not applicable. 3.3.7 Specific heat (1,090 ± 0,040) kJ/kg.K at 20 °C. 3.3.8 Viscosity Not applicable. 3.3.9 Critical temperature Not applicable. 3.3.10 Critical pressure Not applicable. 3.3.11 Physical hardness Not applicable. 3.4 Chemical properties The product is a strong oxidant. It liberates chlorine by hydrolysis. 4 Purity criteria 4.1 General This European Standard specifies the minimum purity requirements for dihydrate sodium dichloroisocyanurate used for the treatment of water for swimming pools. Limits are given for impurities commonly present in the produ
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.