EN 16603-70-01:2015
(Main)Space engineering - On-board control procedures
Space engineering - On-board control procedures
This Standard defines the concept for an OBCP system, identifying the on-board functionality for OBCP execution and the ground functionality for OBCP preparation and subsequent control.
This Standard also defines the development lifecycle for OBCPs and identifies the relationships of this lifecycle with the overall space system, and in particular with the other elements of the on-board software.
This Standard assumes that missions implementing OBCPs are also compliant with ECSS-E-70-41, since a number of services contained therein are invoked in support of the operation of OBCPs and their interaction with the ground.
This Standard may be tailored for the specific characteristic and constraints of a space project in conformance with ECSS-S-ST-00.
Raumfahrttechnik - Bordseitige Kontrollprozeduren
Ingénierie spatiale - Procédures automatiques de contrôle bord
Vesoljska tehnika - Krmilni postopki na plovilih
Ta standard določa koncept za sistem krmilnih postopkov na plovilih (OBCP), pri čemer opredeljuje funkcionalnost na plovilih za izvajanje krmilnih postopkov na plovilih ter zemeljsko funkcionalnost za pripravo in posledični nadzor nad krmilnimi postopki na plovilih. Ta standard določa tudi razvojni življenjski cikel za krmilne postopke na plovilih in določa odnose tega življenjskega cikla s celotnim vesoljskim sistemom ter zlasti z drugimi elementi programske opreme na plovilih. Ta standard predpostavlja, da so krmilni postopki na plovilih za izvajanje misij skladni tudi s standardom ECSS-E-70-41, saj je več zajetih storitev namenjenih podpori delovanja krmilnih postopkov na plovilih in njihovega medsebojnega vpliva s tlemi. Ta standard se lahko prilagodi posameznim lastnostim in omejitvam vesoljskega projekta v skladu s standardom ECSS-S-ST-00.
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Vesoljska tehnika - Krmilni postopki na plovilihRaumfahrttechnik - Bordseitige KontrollprozedurenIngénierie spatiale - Procédures automatiques de contrôle bordSpace engineering - On-board control procedures49.140Vesoljski sistemi in operacijeSpace systems and operations49.090On-board equipment and instrumentsICS:Ta slovenski standard je istoveten z:EN 16603-70-01:2015SIST EN 16603-70-01:2015en01-april-2015SIST EN 16603-70-01:2015SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 16603-70-01
January 2015 ICS 49.140
English version
Space engineering - On-board control procedures
Ingénierie spatiale - Procédures automatiques de contrôle bord
Raumfahrtproduktsicherung - Bordseitige Kontrollprozeduren This European Standard was approved by CEN on 23 November 2014.
CEN and CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN and CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN and CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN and CENELEC members are the national standards bodies and national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels © 2015 CEN/CENELEC All rights of exploitation in any form and by any means reserved worldwide for CEN national Members and for CENELEC Members. Ref. No. EN 16603-70-01:2015 E SIST EN 16603-70-01:2015
Figures Figure 4-1 The OBCP system. 15 Figure 5-1: OBCP state diagram . 26 Figure 6-1: Lifecycles of OBCPs originating from the different domains . 34 Figure 6-2: OBCP management overview . 36 Figure 6-3: Synchronisation of OBAP lifecycles with system and OBSW lifecycles . 36
This Standard assumes that missions implementing OBCPs are also compliant with ECSS-E-70-41, since a number of services contained therein are invoked in support of the operation of OBCPs and their interaction with the ground. This Standard may be tailored for the specific characteristic and constraints of a space project in conformance with ECSS-S-ST-00.
EN reference Reference in text Title EN 16601-00-01 ECSS-S-ST-00-01 ECSS system - Glossary of terms EN 16603-40 ECSS-E-ST-40 Space engineering - Software EN 16603-70 ECSS-E-ST-70 Space engineering - Ground systems and operations EN 16603-70-31 ECSS-E-ST-70-31 Space engineering - Ground systems and operations - Monitoring and control data definition
EN 16603-70-41 ECSS-E-70-41 Space engineering - Ground systems and operations - Telemetry and telecommand packet utilization
NOTE
Depending on the context, OBCP can refer to an OBCP in program source code form, or in OBCP code. 3.2.3 OBCP code complete representation of an OBCP, in a form that can be loaded on-board for subsequent execution NOTE 1 In previous missions, such code is typically referred to as token code, executable code or bytecode depending on the implementation of the relevant OBCP engine. SIST EN 16603-70-01:2015
OBCP operations are initiated by means of ECSS-E-70-41 Service 18 telecommands. 3.2.5 OBCP language programming language
in which OBCP source code is expressed by human programmers 3.2.6 OBCP system the entire machinery for the creation (in the ground system), uplinking, and on-board handling of OBCPs 3.2.7 OBCP step sequence of OBCP source code statements constituting the smallest operational unit within an OBCP 3.2.8 on-board software software hosted and executed by any programmable on-board computer or processor 3.2.9 scheduling controlling the allocation of OBSW processor (CPU) time for execution of the various OBSW functions, according to a predefined algorithm NOTE
OBSW functions include the OBCP engine and execution of OBCPs. 3.2.10 survival mode configuration of a spacecraft in which it can remain safely without ground segmen
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.