CEN/TR 17304:2018

Construction products - Assessment of release of dangerous substances - Determination of emissions into indoor air of ammonia from cellulose insulation at 90 % RH

This Technical Report specifies a method for the determination of ammonia from cellulose insulation products at 90% relative humidity (RH).
This document is based on the existing prEN 16516 standard which provides an horizontal reference method for the determination of emissions of regulated dangerous substances from construction products into indoor air.

Bauprodukte - Bewertung der Freisetzung gefährlicher Stoffe - Bestimmung der Ammoniakemissionen von Zellulosedämmstoffen bei einer relativen Luftfeuchtigkeit von 90%

Produits de construction - Évaluation de l'émission de substances dangereuses - Détermination des émissions d'ammoniac dans l'air intérieur provenant des isolants en ouate de cellulose à 90 % HR

Le présent document spécifie une méthode de détermination des émissions d’ammoniac par les isolants en ouate de cellulose dans l’air intérieur à 90 % d’humidité relative (HR). Il repose sur l’utilisation d’une chambre d’essai d’émission et sur l’analyse ultérieure de l’ammoniac dans l’air de la chambre d’essai.

Gradbeni proizvodi - Ocenjevanje sproščanja nevarnih snovi - Določevanje emisij amoniaka iz celuloznih izolacijskih materialov v notranji zrak pri 90 % relativni vlažnosti

To tehnično poročilo določa metodo za določevanje amoniaka iz celuloznih izolacijskih materialov pri 90 % relativni vlažnosti.
Ta evropski standard temelji na obstoječem standardu prEN 1651, ki vsebuje horizontalno referenčno metodo za določevanje emisije reguliranih nevarnih snovi iz gradbenih proizvodov v notranji zrak.

General Information

• Status: Published
• Publication Date: 13-Nov-2018
• ICS: 91.100.60 - Thermal and sound insulating materials
• Technical Committee: CEN/TC 351 - Construction Products - Assessment of release of dangerous substances
• Drafting Committee: CEN/TC 351/WG 2 - Emissions into indoor air
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 14-Nov-2018
• Due Date: 24-Oct-2018
• Completion Date: 14-Nov-2018
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Mandate: M/366 - Concerning the execution of standardisation work for the development of horizontal standardised assessment methods for harmonized approcaches relating to dangerous substances under the construction products directive (CPD)
• Ref Project: SIST-TP CEN/TR 17304:2019 - Construction products - Assessment of release of dangerous substances - Determination of emissions into indoor air of ammonia from cellulose insulation at 90 % RH

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TP CEN/TR 17304:2019
01-marec-2019
*UDGEHQLSURL]YRGL2FHQMHYDQMHVSURãþDQMDQHYDUQLKVQRYL'RORþHYDQMHHPLVLM
DPRQLDNDL]FHOXOR]QLKL]RODFLMVNLKPDWHULDORYYQRWUDQML]UDNSULUHODWLYQL
YODåQRVWL
Construction products - Assessment of release of dangerous substances - Determination
of emissions into indoor air of ammonia from cellulose insulation at 90 % RH
Bauprodukte - Bewertung der Freisetzung gefährlicher Stoffe - Bestimmung der
Ammoniakemissionen von Zellulosedämmstoffen bei einer relativen Luftfeuchtigkeit von
90%
Produits de construction - Évaluation de l'émission de substances dangereuses -
Détermination des émissions d'ammoniac dans l'air intérieur provenant des isolants
cellulosiques à 90 % HR
Ta slovenski standard je istoveten z: CEN/TR 17304:2018
ICS:
13.020.99 Drugi standardi v zvezi z Other standards related to
varstvom okolja environmental protection
91.100.60 0DWHULDOL]DWRSORWQRLQ Thermal and sound insulating
]YRþQRL]RODFLMR materials
SIST-TP CEN/TR 17304:2019 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST-TP CEN/TR 17304:2019

---------------------- Page: 2 ----------------------

SIST-TP CEN/TR 17304:2019


CEN/TR 17304
TECHNICAL REPORT

RAPPORT TECHNIQUE

November 2018
TECHNISCHER BERICHT
ICS 91.100.60
English Version

Construction products - Assessment of release of
dangerous substances - Determination of emissions into
indoor air of ammonia from cellulose insulation at 90 %
RH
Produits de construction - Évaluation de l'émission de Bauprodukte - Bewertung der Freisetzung gefährlicher
substances dangereuses - Détermination des émissions Stoffe - Bestimmung der Ammoniakemissionen von
d'ammoniac dans l'air intérieur provenant des isolants Zellulosedämmstoffen bei einer relativen
cellulosiques à 90 % HR Luftfeuchtigkeit von 90%


This Technical Report was approved by CEN on 5 November 2018. It has been drawn up by the Technical Committee CEN/TC
351.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TR 17304:2018 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST-TP CEN/TR 17304:2019
CEN/TR 17304:2018 (E)
Contents Page
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
3.1 Terms relating to sampling and products . 6
3.2 Terms relating to emissions into indoor air and associated laboratory testing . 7
3.3 Terms relating to determination of emitted substances . 9
4 Intended conditions of use, emission scenarios and European reference room . 9
4.1 Intended conditions of use and emission scenario . 9
4.2 Reference room and emission scenario . 9
4.2.1 General . 9
4.2.2 Dimensions and loading factors in the reference room . 10
4.2.3 Ventilation in the reference room.
...