iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 12528:1998

(Main)

Castors and wheels - Castors for furniture - Requirements

Castors and wheels - Castors for furniture - Requirements

This European Standard specifies the technical requirements, the appropriate dimensions and the requirements for testing. This European Standard applies to castors for general furniture applications, but specifically excludes those for swivel chairs and other specialised applications.

Räder und Rollen-Möbelrollen - Anforderungen

Diese Europäische Norm legt die technischen Anforderungen, die geeigneten Abmessungen und die Anforderungen für die Prüfungen fest. Diese Europäische Norm bezieht sich auf Rollen für Möbel, schließt dagegen aber besonders Rollen für Drehstühle und andere Sonderanwendungen aus.

Roues et roulettes - Roulettes pour meubles - Prescriptions

La présente norme européenne spécifie les prescriptions techniques, les dimensions appropriées et les prescriptions techniques pour la réalisation des essais. La présente norme européenne s'applique aux roulettes pour meubles à l'exclusion de celles utilisées pour les sièges de bureau pivotants et autres applications spécialisées.

Castors and wheels - Castors for furniture - Requirements

General Information

Status
Published
Publication Date
22-Sep-1998
Withdrawal Date
30-Mar-1999
ICS
97.140 - Furniture
Technical Committee
CEN/TC 324 - Castors and wheels
Drafting Committee
CEN/TC 324 - Castors and wheels
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
15-Jun-2022
Ref Project
SIST EN 12528:2000 - Castors and wheels - Castors for furniture - Requirements

Relations

Child
EN 12529:1998 - Castors and wheels - Castors for furniture - Castors for swivel chairs - Requirements
Effective Date
22-Dec-2008

Buy Standard

EN 12528:2000EN 12528:2000
PreviousNext
Standard
EN 12528:2000
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Castors and wheels - Castors for furniture - RequirementsRäder und Rollen-Möbelrollen - AnforderungenRoues et roulettes - Roulettes pour meubles - PrescriptionsCastors and wheels - Castors for furniture - R
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 12526:1998(Main)
Castors and wheels - Vocabulary, recommended symbols and multilingual dictionary
SIST EN 12526:2000

This European Standard defines terms and symbols relating to castors and wheels.   NOTE 1: Castors and wheels is the English expression; in other languages the expression may be reversed e.g. in French "Roues et roulettes" and in German "Räder und Rollen".

  • Standard
    45 pages
    English, French, German, Finnish, Italian, Holland and Swedish language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12529:1998(Main)
Castors and wheels - Castors for furniture - Castors for swivel chairs - Requirements
SIST EN 12529:2000

This European Standard specifies the technical requirements, the appropriate dimensions and the requirements for testing. This European Standard applies to castors with or without braking devices that will normally be used on swivel chairs.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15186:2024(Main)
Furniture - Assessment of the surface resistance to scratching
kSIST FprEN 15186:2023

This document specifies a method for the assessment of the surface resistance to different kinds of visible scratches. It relates to the rigid surfaces of all finished products, regardless of their material.
It does not apply to finishes on leather and fabrics.
Method A is suitable for all types of surface coatings and coverings except for melamine faced boards (according to EN 14322) and HPL (according to EN 438 1). It simulates measurable penetrating and/or deforming scratches.
Method B is suitable for all types of surfaces. It simulates first visible traces (e.g. scratches, marks) that can also be a change in the gloss.
The test is intended to be carried out on a part of finished furniture. It can, however, be carried out on test panels of the same material, finished in an identical manner to the finished product, and of a size sufficient to meet the requirements of the test.
It is essential that the test be carried out on unused surfaces.

  • Draft
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 747-1:2024(Main)
Furniture - Bunk beds and high beds - Part 1: Safety, strength and durability requirements
kSIST FprEN 747-1:2023

This document specifies requirements for the safety, strength and durability of bunk beds and high beds for domestic and non-domestic use.
It is applicable to bunk beds and high beds with an internal length greater than 1 400 mm and a maximum bed base width of 1 200 mm, and with the upper surface of a bed base of 600 mm or more above the floor.
This document does not apply to bunk beds and high beds used for special purposes, including but not limited to prisons, the military and fire brigades.
If other products are included in a bunk bed/high bed, for example a table or storage furniture, the relevant European Standards could, in addition, apply.
The document contains one annex:
-   Annex A (informative) - Rationales.

  • Draft
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 747-2:2024(Main)
Furniture - Bunk beds and high beds - Part 2: Test methods
kSIST FprEN 747-2:2023

This document specifies test methods for the safety, strength and durability of bunk beds and high beds for domestic and non-domestic use.
The tests are applicable to beds with an internal length greater than 1 400 mm and a maximum bed base width of 1 200 mm and with the upper surface of a bed base 600 mm or more above the floor.
The tests are designed to be applied to a bed that is fully assembled and ready for use.
The applicable safety requirements are given in FprEN 747-1:2023.

  • Draft
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17850:2023(Main)
Hardware for furniture - Star bases for seating - Requirements and test methods
SIST EN 17850:2024

This document specifies requirements and test methods for the determination of the strength, durability and stiffness of star bases for use for seating with three or more legs.
It is not applicable for star bases intended to be used in child seating products.
It is applicable without regard to materials, design/construction or manufacturing processes.
It is a component standard helping to regulate star-base properties between component manufacturer and manufacturer of final seating. This document is not relevant for the final consumer where standards for complete articles exist.
The requirements are based upon star bases fitted with glides and with castors whose wheels are up to 65 mm diameter and for use by persons weighing up to 150 kg.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15372:2023(Main)
Furniture - Strength, durability and safety - Requirements for non-domestic tables
SIST EN 15372:2024

This document specifies requirements for the safety, strength and durability of all types of non-domestic tables including those with glass in their construction.
It does not apply to office work tables or desks, tables for educational institutions, laboratory workbenches for educational institutions and outdoor tables for which EN standards exist.
It does not apply to laboratory workbenches for professional use and industrial workbenches.
It does not apply to tables where the table top is not fixed to the understructure, i.e. when applying test 6, Table 2, the top becomes detached from the understructure.
With exception of the stability tests, this document does not provide assessment of the suitability of any storage features included in non-domestic tables.
It does not include requirements for electrical safety.
It does not include requirements for the resistance to ageing, degradation.
This document has three annexes:
-   Annex A (normative) Test methods for finger entrapment;
-   Annex B (informative) Additional test requirements;
-   Annex C (informative) Test severity in relation to application.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15185:2023(Main)
Furniture - Assessment of the surface resistance to abrasion
SIST EN 15185:2024

This document specifies a method for the assessment of the abrasion resistance of surfaces with foils, laminates, melamine faced boards, pigmented and transparent lacquers.
It does not apply to leather and textile surfaces.
It does not apply to the surfaces covered by EN 14434.
The test is intended to be carried out on an unused part of the finished furniture, but can be carried out on test panels of the same material, finished in an identical manner to the finished product, and of a size sufficient to meet the requirements of the test.
The test is intended to be carried out on unused surfaces.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16121:2023(Main)
Non-domestic storage furniture - Requirements for safety, strength, durability and stability
SIST EN 16121:2024

This document specifies requirements for the safety, strength, and durability for all types of non-domestic storage furniture.
It does not apply to domestic storage, industrial storage, kitchen, catering equipment, retail storage, and industrial storage lockers.
Requirements for strength and durability do not apply to the structure of the building for example the strength of wall hanging cabinets includes only the cabinets and the parts used for attachment. The wall and the wall attachments are not included.
The standard contains five annexes
Annex A (normative) Test methods for finger entrapment;
Annex B (normative) Requirements for schools, kindergartens and similar applications
Annex C (normative) Selecting product from a range of furniture
Annex D (informative) Guidance of test severity in relation to application
Annex E (informative) Suggested loads for tests not specified in this standard
It does not include requirements for the resistance to ageing, degradation and flammability.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17902:2023(Main)
Furniture - Circularity - Evaluation method for dis/re-assembly capability
SIST EN 17902:2024

This document provides guidelines for one aspect of circular economy framework; disassembly and reassembly capability.
This document establishes a set of criteria on which to base an assessment of the ability to access and remove/replace/reassemble priority parts of products. The criteria provided are intended to be used when designing a product and are applicable to different designs, materials, or construction methods.
This document does not include requirements.
The document does not apply to disassembly operation for the sole purpose of separating the individual materials.
This document does not provide a method to evaluate the overall degree of circularity of furniture products. For this, additional complementary evaluation methods for other aspects are necessary.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day