Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es) (ISO 10062:2022)

This document specifies tests which are intended to determine the influence of one or more flowing polluting gas(es) at volume fractions less than or equal to 10−6 on test samples and/or articles of metals and alloys with or without corrosion protection under determined conditions of temperature and relative humidity.
This document is applicable to
a) metals and their alloys,
b) metallic coatings (anodic and cathodic),
c) metals with conversion coatings,
d) metals with anodic oxide coatings, and
e) metals with organic coatings.

Korrosionsprüfungen in künstlicher Atmosphäre mit sehr niedrigen Konzentrationen von Schadgas(en) (ISO 10062:2022)

Dieses Dokument legt Prüfverfahren fest, die zur Bestimmung des Einflusses von einem oder mehreren Schadgas(en) in Volumenanteilen von höchstens 10−6 auf Proben und/oder Gegenständen aus Metallen und Legierungen mit oder ohne Korrosionsschutz unter festgelegten Bedingungen für Temperatur und relative Feuchte vorgesehen sind.
Dieses Dokument ist anwendbar für
a)   Metalle und ihre Legierungen,
b)   metallische Überzüge (anodisch und kathodisch),
c)   Metalle mit Umwandlungsschichten,
d)   Metalle mit anodischen oxidischen Überzügen und Beschichtungen, und
e)   Metalle mit organischen Beschichtungen.

Essais de corrosion en atmosphère artificielle à très faible concentration en gaz polluants (ISO 10062:2022)

Le présent document spécifie des essais ayant pour but de déterminer les effets d'un balayage par un ou plusieurs gaz polluants, à des fractions volumiques inférieures ou égales à 10−6, sur des éprouvettes et/ou des objets en matériaux métalliques et alliages avec ou sans protection contre la corrosion, dans des conditions déterminées de température et d'humidité relative.
Le présent document s’applique
a) aux métaux et à leurs alliages,
b) aux revêtements métalliques (anodiques et cathodiques),
c) aux métaux à couches de conversion,
d) aux métaux à revêtements d'oxydes anodiques, et
e)            aux métaux à revêtements organiques.

Korozijski preskusi v umetni atmosferi pri zelo majhnih koncentracijah škodljivih plinov (ISO 10062:2022)

ISO 10062:2006 določa preskuse, ki so namenjeni ugotavljanju vpliva enega ali več tekočih škodljivih plinov pri volumskih deležih, manjših ali enakih 0,000001, na preskusne vzorce in/ali izdelke iz kovin in zlitin z zaščito pred korozijo ali brez nje pod določenimi pogoji temperature in relativne vlažnosti.
Preskusi se uporabljajo za kovine in njihove zlitine, kovinske prevleke (anodne in katodne), kovine s konverzijskimi prevlekami, kovine z anodno oksidnimi prevlekami in kovine z organskimi prevlekami.

General Information

Status
Published
Publication Date
29-Nov-2022
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
30-Nov-2022
Completion Date
30-Nov-2022

Relations

Buy Standard

Standard
EN ISO 10062:2023
English language
19 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 10062:2022
English language
17 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 10062:2023
01-februar-2023
Nadomešča:
SIST EN ISO 10062:2008
Korozijski preskusi v umetni atmosferi pri zelo majhnih koncentracijah škodljivih
plinov (ISO 10062:2022)
Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es)
(ISO 10062:2022)
Korrosionsprüfungen in künstlicher Atmosphäre mit sehr niedrigen Konzentrationen von
Schadgas(en) (ISO 10062:2022)
Essais de corrosion en atmosphère artificielle à très faible concentration en gaz
polluants (ISO 10062:2022)
Ta slovenski standard je istoveten z: EN ISO 10062:2022
ICS:
77.060 Korozija kovin Corrosion of metals
SIST EN ISO 10062:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 10062:2023

---------------------- Page: 2 ----------------------
SIST EN ISO 10062:2023


EN ISO 10062
EUROPEAN STANDARD

NORME EUROPÉENNE

November 2022
EUROPÄISCHE NORM
ICS 77.060 Supersedes EN ISO 10062:2008
English Version

Corrosion tests in artificial atmosphere at very low
concentrations of polluting gas(es) (ISO 10062:2022)
Essais de corrosion en atmosphère artificielle à très Korrosionsprüfungen in künstlicher Atmosphäre mit
faible concentration en gaz polluants (ISO 10062:2022) sehr niedrigen Konzentrationen von Schadgas(en) (ISO
10062:2022)
This European Standard was approved by CEN on 13 November 2022.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10062:2022 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 10062:2023
EN ISO 10062:2022 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 10062:2023
EN ISO 10062:2022 (E)
European foreword
This document (EN ISO 10062:2022) has been prepared by Technical Committee ISO/TC 156
"Corrosion of metals and alloys" in collaboration with Technical Committee CEN/TC 262 “Metallic and
other inorganic coatings, including for corrosion protection and corrosion testing of metals and alloys”
the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by May 2023, and conflicting national standards shall be
withdrawn at the latest by May 2023.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 10062:2008.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 10062:2022 has been approved by CEN as EN ISO 10062:2022 without any modification.

3

----
...

SLOVENSKI STANDARD
oSIST prEN ISO 10062:2022
01-maj-2022
Korozijski preskusi v umetni atmosferi pri zelo majhnih koncentracijah škodljivih
plinov (ISO/DIS 10062:2022)
Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es)
(ISO/DIS 10062:2022)
Korrosionsprüfungen in künstlicher Atmosphäre mit sehr niedrigen Konzentrationen von
Schadgas(en) (ISO/DIS 10062:2022)
Essais de corrosion en atmosphère artificielle à très faible concentration en gaz
polluants (ISO/DIS 10062:2022)
Ta slovenski standard je istoveten z: prEN ISO 10062
ICS:
77.060 Korozija kovin Corrosion of metals
oSIST prEN ISO 10062:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 10062:2022

---------------------- Page: 2 ----------------------
oSIST prEN ISO 10062:2022
DRAFT INTERNATIONAL STANDARD
ISO/DIS 10062
ISO/TC 156 Secretariat: SAC
Voting begins on: Voting terminates on:
2022-03-17 2022-06-09
Corrosion tests in artificial atmosphere at very low
concentrations of polluting gas(es)
Corrosion des métaux et alliages — Essais de corrosion en atmosphère artificielle à très faible
concentration en gaz polluants
ICS: 77.060
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 10062:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022

---------------------- Page: 3 ----------------------
oSIST prEN ISO 10062:2022
ISO/DIS 10062:2022(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
  © ISO 2022 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 10062:2022
ISO/DIS 10062:2022(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Apparatus . 2
5 Test methods . 2
5.1 Test severity . 2
5.1.1 General .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.