iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 474-3:1996

(Main)

Earth-moving machinery - Safety - Part 3: Requirements for loaders

Earth-moving machinery - Safety - Part 3: Requirements for loaders

This standard specifies additional requirements and/or exceptions from EN 474-1:1994 'Earth-moving machinery - Safety - Part 1: General requirements'.   This standard applies to wheel and crawler loaders defined in ISO/DIS 6165:1994, and gives additional requirements for attachments and for derivated machinery.   This standard applies also for compact loaders as defined in 3.2.2 and figure B.2.   This standard deals with the significant hazards pertinent to loaders when they are used as intended and under the conditions foreseen by the manufacturer (see Annex A of this standard and Annex C of EN 474-1:1994).  Telescopic loaders are not covered in EN 474.

Erdbaumaschinen - Sicherheit - Teil 3: Anforderungen für Lader

Diese Norm beschreibt zusätzliche Anforderungen und/oder Abweichungen von EN 474-1 Erdbaumaschinen - Sicherheit - Allgemeine Anforderungen. Diese Norm gilt für Rad- und Kettenlader, wie sie in ISO 6165 definiert sind, und beinhaltet zusätzliche Anforderungen für Arbeitsausrüstungen und für artverwandte Maschinen. Diese Norm gilt auch für Kompaktlader, wie sie in Abschnitt 3.2.1 und Anhang B, Bild B.2 definiert sind.

Engins de terrassement - Sécurité - Partie 3: Exigences applicables aux chargeuses

La présente norme spécifie des exigences complémentaires et/ou des exceptions à la norme EN 474-1: Engins de terrassement - Sécurité - Exigences générales. La présente norme s'applique aux chargeuses sur roues et sur chenilles telles que définies dans l'ISO 615, et fournit des exigences complémentaires pour les accessoires et pour les machines dérivées. La présente norme s'applique aussi aux chargeuses compactes telles que définies en 3.2.1 et dans l'annexe B, figure B.2.

Earth-moving machinery - Safety - Part 3: Requirements for loaders

General Information

Status
Withdrawn
Publication Date
07-Feb-1996
Withdrawal Date
28-Nov-2006
ICS
53.100 - Earth-moving machinery
Technical Committee
CEN/TC 151 - Construction equipment and building material machines - Safety
Drafting Committee
CEN/TC 151/WG 1 - Earth-moving machinery - Safety
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
29-Nov-2006
Completion Date
29-Nov-2006
Directive
89/392/EEC - Machinery - Safety of machinery: general essential health and safety requirements
98/37/EC - Machinery
Mandate
M/BC/CEN/91/1 - Standardization request to CEN/CENELEC concerning machines presenting hazards due to mobility or load lifting
Ref Project
SIST EN 474-3:2000 - Earth-moving machinery - Safety - Part 3: Requirements for loaders

Relations

Replaced By
EN 474-3:2006 - Earth-moving machinery - Safety - Part 3: Requirements for loaders
Effective Date
22-Dec-2008

Buy Standard

EN 474-3:2000EN 474-3:2000
PreviousNext
Standard
EN 474-3:2000
English language
23 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 474-3:2000
01-april-2000
Earth-moving machinery - Safety - Part 3: Requirements for loaders
Earth-moving machinery - Safety - Part 3: Requirements for loaders
Erdbaumaschinen - Sicherheit - Teil 3: Anforderungen für Lader
Engins de terrassement - Sécurité - Partie 3: Exigences applicable
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 6165:2022(Main)
Earth-moving machinery - Basic types - Identification and vocabulary (ISO 6165:2022)
SIST EN ISO 6165:2022

This document provides vocabulary and an identification structure for classifying earth-moving machinery designed to perform the following operations:
—    excavation;
—    loading;
—    transportation;
—    drilling, spreading, compacting or trenching of earth, rock and other materials, during work, for example, on roads and dams, in quarries and mines and on building sites.
The purpose of this document is to provide a clear means to identify earth-moving machinery according to its function and design configurations which can include additional classifications according to its operating mass and control operator configuration.
Annex A provides a procedure based on the identification structure used by this document to classify the machinery and introduce detailed identifications consistent with the logic implied by the structure.
Annex B provides a hierarchy of the operator control configurations for earth-moving machinery.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 19014-2:2022(Main)
Earth-moving machinery - Functional safety - Part 2: Design and evaluation of hardware and architecture requirements for safety-related parts of the control system (ISO 19014-2:2022)
SIST EN ISO 19014-2:2022

This document specifies general principles for the development and evaluation of the machine performance level achieved (MPLa) of safety-control systems (SCS) using components powered by all energy sources (e.g. electronic, electrical, hydraulic, mechanical) used in earth-moving machinery and its equipment, as defined in ISO 6165.
The principles of this document apply to machine control systems (MCS) that control machine motion or mitigate a hazard; such systems are assessed for machine performance level required (MPLr) per ISO 19014-1 or ISO/TS 19014-5.
Excluded from the scope of this document are the following systems:
—    awareness systems that do not impact machine motion (e.g. cameras and radar detectors);
—    fire suppression systems, unless the activation of the system interferes with, or activates, another SCS.
Other systems or components whereby the operator would be aware of failure (e.g. windscreen wipers, head lights, etc.), or are primarily used to protect property, are excluded from this document. Audible warnings are excluded from the requirements of diagnostic coverage.
In addition, this document addresses the significant hazards as defined in ISO 12100 mitigated by the hardware components within the SCS.
This document is not applicable to EMM manufactured before the date of its publication.

  • Standard
    51 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 474-5:2022/AC:2022(Corrigendum)
Earth-moving machinery - Safety - Part 5: Requirements for hydraulic excavators
SIST EN 474-5:2022/AC:2022

This document together with EN 474 1:2022 deals with all significant hazards, hazardous situations and events relevant to hydraulic excavators when used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex A) associated with the whole lifetime of the machine as described in EN ISO 12100:2010, 5.4.
The requirements of this document are complementary to the common requirements formulated in EN 474 1:2022. This document does not repeat the requirements of EN 474 1:2022 but supplements or modifies the requirements for hydraulic excavators.
This document does not provide requirements for main electrical circuits and drives of machinery when the primary source of energy is an external electrical supply.
The following significant and relevant hazards are not covered in this document:
—   Laser;
—   Lightning.
This document does not provide performance requirements for safety related functions of control system(s).
This document does not deal with towing of trailers.
This document does not deal with demolition machinery.
This document also deals with lifting operation application, shovel application, log application, grapple application, and magnetic plate application.
This document is not applicable to hydraulic excavators which are manufactured before the date of publication of this document by CEN.

  • Corrigendum
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 474-3:2022/AC:2022(Corrigendum)
Earth-moving machinery - Safety - Part 3: Requirements for loaders
SIST EN 474-3:2022/AC:2022

This document together with EN 474 1:2022 deals with all significant hazards, hazardous situations and events relevant to loaders when used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex A) associated with the whole lifetime of the machine as described in EN ISO 12100:2010, 5.4.
The requirements of this document are complementary to the common requirements formulated in EN 474 1:2022. This document does not repeat the requirements of EN 474 1:2022 but supplements or modifies the requirements for loaders.
This document does not provide requirements for main electrical circuits and drives of machinery when the primary source of energy is an external electrical supply.
This document does not provide performance requirements for safety related functions of control system(s).
The following significant and relevant hazards are not covered in this document:
—   Laser;
—   Lightning.
This document does not deal with towing of trailers.
This document does not deal with demolition machinery.
This part also deals with fork application, log handling application, single heavy object handling application and lifting operation application.
This document is not applicable to loaders which are manufactured before the date of publication of this document by CEN.
NOTE   For travelling on public roads, national traffic regulations apply (e.g. braking, steering, lighting, towing, etc.) until harmonized requirements are available.

  • Corrigendum
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 474-10:2022(Main)
Earth-moving machinery - Safety - Part 10: Requirements for trenchers
SIST EN 474-10:2022

This document together with EN 474 1:2022 deals with all significant hazards, hazardous situations and events relevant to trenchers as defined in Clause 3 when used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex A) associated with the whole lifetime of the machine as described in EN ISO 12100:2010, 5.4.
The requirements of this document are complementary to the common requirements formulated in EN 474-1:2022. This document does not repeat the requirements of EN 474-1:2022 but supplements or modifies the requirements for trenchers.
This document deals with:
—   trenchers (3.1);
—   trenching equipment (3.2);
NOTE   In this document "trenchers" entails both "trencher" and "trenching equipment".
—   truck vacuum trenchers (3.1.2);
—   trenchers equipped with trencher backhoe equipment (3.3).
This document provides specific health and safety requirements of the trenching equipment itself and of the interface (e.g. mechanical, electric, hydraulic, controls) between the carrier-vehicle and its equipment as well as the interaction and effects on each other when used together (e.g. visibility).
This document does not apply to carrier-vehicles which are subject to other relevant regulations.
This document does not deal with continuous surface miners as defined in ISO 19224:2017, truck-trenchers that do not incorporate a vacuum extraction system or self-propelled ride-on and pedestrian controlled floor cutting-off machinery (e.g. ground saw) which are under the scope of EN 13862:2021.
This document does not provide requirements for main electrical circuits and drives of machinery when the primary source of energy is an external electrical supply.
This document does not provide performance requirements for safety related functions of control system(s).
The following significant and relevant hazards are not covered in this document:
—   Transmission of power between self-propelled machinery (or tractor) and recipient machinery;
—   Laser;
—   Lightning.
This document is not applicable to trenchers which are manufactured before the date of publication of this document by CEN.

  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 474-8:2022(Main)
Earth-moving machinery - Safety - Part 8: Requirements for graders
SIST EN 474-8:2022

This document, together with EN 474 1:2022 deals with all significant hazards, hazardous situations and events relevant to graders as defined in 3.1, when used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex A), associated with the whole life time of the machine as described in EN ISO 12100:2010, 5.4.
The requirements of this document are complementary to the common requirements formulated in EN 474 1:2022. This document does not repeat the requirements of EN 474 1:2022 but supplements or modifies the requirements for graders.
This document does not provide performance requirements for safety related functions of control system(s).
The following significant and relevant hazards are not covered in this document:
—   Transmission of power between self-propelled machinery (or tractor) and recipient machinery;
—   Laser;
—   Lightning.
This document is not applicable to graders manufactured before the date of publication of this document by CEN.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 474-2:2022(Main)
Earth-moving machinery - Safety - Part 2: Requirements for tractor-dozers
SIST EN 474-2:2022

This document together with EN 474 1:2022 deals with all significant hazards, hazardous situations and events relevant to tractor-dozers when used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex A) associated with the whole lifetime of the machine as described in EN ISO 12100:2010, 5.4.
The following significant and relevant hazards are not covered in this document:
—   Laser;
—   Lightning.
The requirements of this document are complementary to the common requirements formulated in EN 474-1:2022. This document does not repeat the requirements of EN 474-1:2022 but supplements or modifies the requirements for tractor-dozers.
This document does not provide requirements for main electrical circuits and drives of machinery when the primary source of energy is an external electrical supply.
This document does not provide performance requirements for safety related functions of control system(s).
This document does not deal with towing of trailers.
This document does not deal with demolition machinery.
This part also deals with fork application, log handling application, single heavy object handling application and lifting operation application.
This document is not applicable to tractor-dozers which are manufactured before the date of publication of this document by CEN.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 474-9:2022(Main)
Earth-moving machinery - Safety - Part 9: Requirements for pipelayers
SIST EN 474-9:2022

This document, together with EN 474 1:2022, deals with all significant hazards, hazardous situations and events relevant to pipelayers as defined in 3.1, when used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex A) associated with the whole lifetime of the machine as described in EN ISO 12100:2010, 5.4.
The requirements of this document are complementary to the common requirements formulated in EN 474 1:2022. This document does not repeat the requirements of EN 474 1:2022 but supplements or modifies the requirements for pipelayers.
This document also specifies additional requirements for rear mounted winches.
This document does not provide performance requirements for safety related functions of control system(s).
The following significant and relevant hazards are not covered in this document:
—   Transmission of power between self-propelled machinery (or tractor) and recipient machinery;
—   Laser;
—   Lightning.
Pipelayers with rotating upper structure are excluded from the scope of this document.
This document is not applicable to pipelayers manufactured before the date of publication of this document by CEN.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 474-4:2022(Main)
Earth-moving machinery - Safety - Part 4: Requirements for backhoe loaders
SIST EN 474-4:2022

This document together with EN 474 1:2022 deals with all significant hazards, hazardous situations and events relevant to backhoe loaders when used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex A) associated with the whole lifetime of the machine as described in EN ISO 12100:2010, 5.4.
The requirements of this document are complementary to the common requirements formulated in EN 474 1:2022. This document does not repeat the requirements of EN 474 1:2022 but supplements or modifies the requirements for backhoe loaders.
This document does not provide requirements for main electrical circuits and drives of machinery when the primary source of energy is an external electrical supply.
This document does not provide performance requirements for safety related functions of control system(s).
This document does not deal with demolition machinery.
This document also deals with fork application, log handling application and lifting operation application.
This document is not applicable to backhoe loaders which are manufactured before the date of publication of this document by CEN.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 474-13:2022(Main)
Earth-moving machinery - Safety - Part 13: Requirements for rollers
SIST EN 474-13:2022

This document together with EN 474 1:2022 deals with all significant hazards, hazardous situations and events relevant to rollers when used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex A) associated with the whole lifetime of the machine as described in EN ISO 12100:2010, 5.4.
The requirements of this document are complementary to the common requirements formulated in EN 474 1:2022. This document does not repeat the requirements of EN 474 1:2022 but supplements or modifies the requirements for rollers.
This document does not provide requirements for main electrical circuits and drives of machinery when the primary source of energy is an external electrical supply.
The following significant and relevant hazards are not covered in this document:
—   Laser;
—   Lightning.
This document does not provide performance requirements for safety related functions of control system(s).
This document does not deal with towing of trailers.
This part of EN 474:2022 is not applicable for seated ride-on operated rollers with a drum width less than nominal 0,8 m.
This document is not applicable to rollers which are manufactured before the date of publication of this document by CEN.

  • Standard
    55 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    47 pages
    English language
    sale 10% off
    e-Library read for
    1 day