Small craft - Inboard petrol engines - Engine-mounted fuel and electrical components (ISO 15584:2001)

Kleine Wasserfahrzeuge - Kraftstoff- und elektrische Systeme für fest montierte Ottomotoren (ISO 15584:2001)

Diese Norm legt Regeln für Konstruktion und Montage für motorseitige Teile des Kraftstoff und elektrischen Systems fest um die Leckage in Kraftsfoffleitungen zu minimieren und zur Vermeidung der Entzündung von explosiven Gasgemischen auf kleinen Wasserfahrzeugen mit einer Rumpflänge bis 24 m. Die folgenden Motortypen fallen nicht unter den Anwendungsbereich dieser Norm: - Motoren in Wasserskootern wie in ISO 13590 definiert (siehe Literaturhinweise); - Außenbordmotoren.

Petits navires - Moteurs intérieurs à essence - Eléments des circuits d'alimentation et des systèmes électriques (ISO 15584:2001)

La présente Norme internationale spécifie les exigences relatives à la conception et à l'installation des éléments des circuits d'alimentation en combustible et des systèmes électriques pour moteurs intérieurs à essence, permettant de réduire les fuites de combustible et d'assurer une protection contre l'inflammation des gaz explosifs environnants sur les petits navires dont la coque n'excède pas 24 m de longueur. Les modèles de moteurs suivants ne sont pas couverts par la présente Norme internationale : - les moteurs définis dans l'ISO 13590 équipant les motos aquatiques (voir la bibliographie) ; - les moteurs hors-bord.

Mala plovila - Vgrajeni bencinski motorji - Nameščene komponente za gorivo in elektriko (ISO 15584:2001)

General Information

Status
Withdrawn
Publication Date
14-Mar-2001
Withdrawal Date
15-Aug-2017
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
16-Aug-2017

Relations

Buy Standard

Standard
EN ISO 15584:2002
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 15584:2002
01-januar-2002
0DODSORYLOD9JUDMHQLEHQFLQVNLPRWRUML1DPHãþHQHNRPSRQHQWH]DJRULYRLQ
HOHNWULNR ,62
Small craft - Inboard petrol engines - Engine-mounted fuel and electrical components
(ISO 15584:2001)
Kleine Wasserfahrzeuge - Kraftstoff- und elektrische Systeme für fest montierte
Ottomotoren (ISO 15584:2001)
Petits navires - Moteurs intérieurs a essence - Eléments des circuits d'alimentation et
des systemes électriques (ISO 15584:2001)
Ta slovenski standard je istoveten z: EN ISO 15584:2001
ICS:
47.020.20 Ladijski motorji Marine engines and
propulsion systems
47.080 ýROQL Small craft
SIST EN ISO 15584:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 15584:2002

---------------------- Page: 2 ----------------------

SIST EN ISO 15584:2002
EUROPEAN STANDARD
EN ISO 15584
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2001
ICS 47.080
English version
Small craft - Inboard petrol engines - Engine-mounted fuel and
electrical components (ISO 15584:2001)
Petits navires - Moteurs intérieurs à essence - Eléments Kleine Wasserfahrzeuge - Einbau-Benzinmotoren - Fest
des circuits d'alimentation et des systèmes électriques am Motor montierte Bauteile für die Kraftstoff- und
(ISO 15584:2001) Stromversorgung (ISO 15584:2001)
This European Standard was approved by CEN on 15 March 2001.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2001 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15584:2001 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 15584:2002
Page 2
EN ISO 15584:2001
Foreword
Corrected 2001-05-09
The text of the International Standard ISO 15584:2001 has been prepared by Technical
Committee ISO/TC 188 "Small craft" in collaboration with CMC.
This European Standard shall be given the status of a national standard, either by publication
of an identical text or by endorsement, at the latest by September 2001, and conflicting
national standards shall be withdrawn at the latest by September 2001.
This European Standard has been prepared under a mandate given to CEN by the European
Commission and the European Free Trade Association, and supports essential requirements
of EU Directive(s).
For relationship with EU Directive(s), see informative Annex ZB, which is an integral part of
this standard.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,
Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United
Kingdom.
Endorsement notice
The text of the International Standard ISO 15584:2001 was approved by CEN as a European
Standard without any modification.
NOTE: Normative references to International Standards are listed in annex ZA (normative).

---------------------- Page: 4 ----------------------

SIST EN ISO 15584:2002
Page 3
EN ISO 15584:2001
Annex ZA (normative)
Normative references to international publications
with their relevant European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions
of any of these publications apply to this European Standard only when incorporated in it by
amendment or revision. For undated references the latest edition of the publication referred to
applies (including amendments).
NOTE Where an International Publication has been modified by common modifications,
indicated by (mod.), the relevant EN/HD applies.
Publication Year Title EN Year
I
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.