Heating systems in buildings - Method for calculation of the design heat load

This standard gives methods for calculating heat losses for basic cases at thed design conditions. This standard gives a method for calculating the design heat load for basic cases under the design conditions. Basic cases are the majority of all buildings to be found in practise with a limited room height (not exceeding 5 meters) and assumed to be heated to steady state conditions under the design conditions.

Heizungsanlagen in Gebäuden - Verfahren zur Berechnung der Norm-Heizlast

Die vorliegende Norm legt Verfahren zur Berechnung der Norm-Wärmeverluste und der Norm-Heizlast für Standardfälle unter Auslegungsbedingungen fest.
   Als Standardfälle gelten alle Gebäude:
   mit einer begrenzten Raumhöhe (nicht über 5 m),
   bei denen angenommen werden kann, dass sie unter den Norm-Bedingungen auf einen stationären Zustand beheizt werden.
Beispiele solcher Gebäude sind: Wohngebäude, Büro- und Verwaltungsgebäude, Schulen, Bibliotheken, Kranken-häuser, Kurheime, Justizvollzugsanstalten, Gebäude für das Hotel- und Gaststättenwesen, Warenhäuser und weitere Gebäude, die für geschäftliche Zwecke genutzt werden, sowie Industriegebäude.
   Außerdem sind Angaben in den Anhängen für die Behandlung folgender Sonderfälle enthalten:
   Hallenbauten mit großer Raumhöhe;
   Gebäude mit wesentlich voneinander abweichender Luft- und mittlerer Strahlungstemperatur.

Systèmes de chauffage dans les bâtiments - Méthode de calcul des déperditions calorifiques de base

La présente norme spécifie des méthodes de calcul des déperditions de base et de la charge thermique pour des configurations classiques, aux conditions de base.
Les configurations classiques comprennent tous les bâtiments :
¾ dont la hauteur des pièces est limitée (n'excédant pas 5 m) ;
¾ supposés chauffés à régime constant aux conditions nominales.
Des exemples de tels bâtiments sont : les bâtiments résidentiels ; les bâtiments de bureaux et administratifs ; les écoles ; les bibliothèques ; les hôpitaux ; les bâtiments de loisirs ; les prisons ; les bâtiments utilisés pour la restauration ; les magasins et les autres bâtiments utilisés à des fins commerciales ; les bâtiments industriels.
Des informations sont également données dans les annexes pour permettre de traiter les cas particuliers suivants :
¾ bâtiments de grande hauteur sous plafond ou grands volumes ;
¾ bâtiments dans lesquels la température de l'air et la température radiante moyenne diffèrent sensiblement.

Ogrevalni sistemi v stavbah - Metoda izračuna projektne toplotne obremenitve

Ta standard določa postopek izračuna za določanje ogrevanja, ki je potrebna pri standardnih pogojih za zagotavljanje, da je dosežena potrebna projektna notranja temperatura zraka. Ta standard opisuje postopek za izračun projektne toplotne obremenitve:
- po prostorih ali po conah za namen dimenzioniranje ogrevalnih površin,
- po celotnem ogrevalnem sistemu za dimenzioniranje kurilne naprave. Ta standard vsebuje tudi poenostavljen računski postopek. Vrednostni parametri in dejavniki za izračun toplotne obremenitve morajo biti določeni v nacionalnem dodatku k temu standardu. V dodatku D so našteti vsi dejavniki, ki so lahko določeni na nacionalni ravni, navedene so tudi standardne vrednosti za primere, za katere nacionalne vrednosti niso na voljo.

General Information

Status
Withdrawn
Publication Date
04-Mar-2003
Withdrawal Date
11-Jul-2017
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
12-Jul-2017

Relations

Buy Standard

Standard
EN 12831:2004 en
English language
76 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard
EN 12831:2004 de
German language
75 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard – translation
EN 12831:2004
Slovenian language
72 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 12831:2004
01-februar-2004
2JUHYDOQLVLVWHPLYVWDYEDK0HWRGDL]UDþXQDSURMHNWQHWRSORWQHREUHPHQLWYH
Heating systems in buildings - Method for calculation of the design heat load
Heizungsanlagen in Gebäuden - Verfahren zur Berechnung der Norm-Heizlast
Systemes de chauffage dans les bâtiments - Méthode de calcul des déperditions
calorifiques de base
Ta slovenski standard je istoveten z: EN 12831:2003
ICS:
91.140.10 Sistemi centralnega Central heating systems
ogrevanja
SIST EN 12831:2004 sl,en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 12831:2004

---------------------- Page: 2 ----------------------

SIST EN 12831:2004
EUROPEAN STANDARD
EN 12831
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2003
ICS 91.140.10
English version
Heating systems in buildings - Method for calculation of the
design heat load
Systèmes de chauffage dans les bâtiments - Méthode de Heizungsanlagen in Gebäuden - Verfahren zur Berechnung
calcul des déperditions calorifiques de base der Norm-Heizlast
This European Standard was approved by CEN on 6 July 2002.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovak Republic, Spain, Sweden, Switzerland and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2003 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12831:2003 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 12831:2004
EN 12831:2003 (E)
Contents
page
FOREWORD .4
INTRODUCTION .5
1 - SCOPE.5
2 - NORMATIVE REFERENCES .6
3 - TERMS, DEFINITIONS AND SYMBOLS.7
3.1 - TERMS AND DEFINITIONS.7
3.2 - SYMBOLS AND UNITS .9
4 - PRINCIPLE OF THE CALCULATION METHOD .11
5 - GENERAL CONSIDERATIONS .12
5.1 - CALCULATION PROCEDURE FOR A HEATED SPACE.12
5.2 - CALCULATION PROCEDURE FOR A BUILDING ENTITY OR A BUILDING.12
5.3 - CALCULATION PROCEDURE FOR THE SIMPLIFIED METHOD.12
6 - DATA REQUIRED .14
6.1 - CLIMATIC DATA .14
6.2 - INTERNAL DESIGN TEMPERATURE .14
6.3 - BUILDING DATA .14
7 – TOTAL DESIGN HEAT LOSS FOR A HEATED SPACE - BASIC CASES.
...

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.REUHPHQLWYHHeizungsanlagen in Gebäuden - Verfahren zur Berechnung der Norm-HeizlastSystemes de chauffage dans les bâtiments - Méthode de calcul des déperditions calorifiques de baseHeating systems in buildings - Method for calculation of the design heat load91.140.10Sistemi centralnega ogrevanjaCentral heating systemsICS:Ta slovenski standard je istoveten z:EN 12831:2003SIST EN 12831:2004sl,en,fr,de01-februar-2004SIST EN 12831:2004SLOVENSKI
STANDARD



SIST EN 12831:2004



EUROPÄISCHE NORMEUROPEAN STANDARDNORME EUROPÉENNEEN 12831März 2003ICS 91.140.10Deutsche FassungHeizungsanlagen in Gebäuden - Verfahren zur Berechnung derNorm-HeizlastHeating systems in buildings - Method for calculation of thedesign heat loadSystèmes de chauffage dans les bâtiments - Méthode decalcul des déperditions calorifiques de baseDiese Europäische Norm wurde vom CEN am 6.Juli 2002 angenommen.Die CEN-Mitglieder sind gehalten, die CEN/CENELEC-Geschäftsordnung zu erfüllen, in der die Bedingungen festgelegt sind, unter denendieser Europäischen Norm ohne jede Änderung der Status einer nationalen Norm zu geben ist. Auf dem letzen Stand befindliche Listendieser nationalen Normen mit ihren bibliographischen Angaben sind beim Management-Zentrum oder bei jedem CEN-Mitglied auf Anfrageerhältlich.Diese Europäische Norm besteht in drei offiziellen Fassungen (Deutsch, Englisch, Französisch). Eine Fassung in einer anderen Sprache,die von einem CEN-Mitglied in eigener Verantwortung durch Übersetzung in seine Landessprache gemacht und dem Management-Zentrum mitgeteilt worden ist, hat den gleichen Status wie die offiziellen Fassungen.CEN-Mitglieder sind die nationalen Normungsinstitute von Belgien, Dänemark, Deutschland, Finnland, Frankreich, Griechenland, Irland,Island, Italien, Luxemburg, Malta, Niederlande, Norwegen, Österreich, Portugal, Schweden, Schweiz, der Slowakischen Republik, Spanien,der Tschechischen Republik, Ungarn und dem Vereinigten Königreich.EUROPÄISCHES KOMITEE FÜR NORMUNGEUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONManagement-Zentrum: rue de Stassart, 36
B-1050 Brüssel© 2003 CENAlle Rechte der Verwertung, gleich in welcher Form und in welchemVerfahren, sind weltweit den nationalen Mitgliedern von CEN vorbehalten.Ref. Nr. EN 12831:2003 DSIST EN 12831:2004



EN 12831:2003 (D)2InhaltSeiteVorwort.4Einleitung.51Anwendungsbereich.62Normative Verweisungen.63Begriffe und Formelzeichen.73.1Begriffe.73.2Formelzeichen und Einheiten.94Grundzüge des Berechnungsverfahrens.105Allgemeine Betrachtungen.115.1Berechnungsverfahren für einen beheizten Raum.115.2Berechnungsverfahren für eine Gebäudeeinheit oder ein gesamtes Gebäude.115.3Vereinfachtes Berechnungsverfahren.126Benötigte Angaben.136.1Meteorologische Daten.136.2Norm—Innentemperatur.136.3Gebäudedaten.137Gesamt-Normwärmeverluste eines beheizten Raumes — Standardfall.157.1Norm—Transmissionswärmeverluste.
...

SLOVENSKI SIST EN 12831

STANDARD
februar 2004












Ogrevalni sistemi v stavbah – Metoda izračuna projektne toplotne
obremenitve

Heating systems in buildings – Method for calculation of the design heat load


Systemes de chauffage dans les bâtiments – Méthode de calcul des
déperditions calorifiques de base


Heizungsanlagen in Gebäuden – Verfahren zur Berechnung der Norm-Heizlast























Referenčna oznaka
ICS 91.140.10 SIST EN 12831:2004 (sl)


Nadaljevanje na straneh II do IV ter od 1 do 69




© 2012-11. Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 12831 : 2004
NACIONALNI UVOD

Standard SIST EN 12831 (sl), Ogrevalni sistemi v stavbah – Metoda izračuna projektne toplotne
obremenitve, 2004, ima status slovenskega standarda in je enakovreden evropskemu standardu EN
12831 (en), Heating systems in buildings – Method for calculation of the design heat load, 2003.

NACIONALNI PREDGOVOR

Evropski standard EN 12831:2003 je pripravil tehnični odbor Evropskega komiteja za standardizacijo
CEN/TC 228 Ogrevalni sistemi v stavbah. Slovenski standard SIST EN 12831:2004 je prevod
evropskega standarda EN 12831:2003. V primeru spora glede besedila slovenskega prevoda v tem
standardu je odločilen izvirni evropski standard v angleškem jeziku. Slovensko izdajo standarda je
pripravil tehnični odbor SIST/TC OGS Ogrevanje stavb.

Odločitev za izdajo tega standarda je dne 16. decembra 2003 sprejel SIST/TC OGS Ogrevanje stavb.

NACIONALNI METEOROLOŠKI PODATKI

Preglednica D1: Meteorološki podatki za različne geografske regije v Republiki Sloveniji; povprečna
projektna temperatura in povprečna zunanja letna temperatura.

Meteorološka postaja Projektna zunanja Povprečna zunanja
temperatura (C) temperatura (OC)
Rateče –17,2 6
Brnik –17,1 8,7
Ljubljana –11,2 10,2
Bilje –8,4 12
Portorož –5,0 13,4
Postojna –12,2 8,7
Črnomelj –12,5 10,4
Novo mesto –13.1 9,9
Celje –16,3 9,6
Šmartno pri Slovenj Gradcu –15,8 8,1
Maribor –12,0 10,1
Murska Sobota –15,9 9,6

Podatki so za referenčno 30-letno obdobje 1971–2001.
Vir: Agencija Republike Slovenije za okolje


II

---------------------- Page: 2 ----------------------

SIST EN 12831 : 2004

ZVEZA S STANDARDI

S privzemom tega evropskega standarda veljajo za omejeni namen referenčnih standardov vsi
standardi, navedeni v izvirniku, razen tistih, ki so že sprejeti v nacionalno standardizacijo:
SIST EN 673 Steklo v gradbeništvu – Določevanje toplotne prehodnosti (vrednost U) –
Računska metoda
SIST EN 12524 Gradbeni materiali in proizvodi – Higrotermalne lastnosti – Tabelirane
računske vrednosti (nadomeščen s SIST EN ISO 10456:2008, Gradbeni
materiali in proizvodi – Higrotermalne lastnosti – Tabelirane računske
vrednosti in postopki za določevanje nazivnih in računskih vrednosti toplotnih
vrednosti (ISO 10456:2007))
SIST EN ISO 6946 Gradbene komponente in gradbeni elementi – Toplotna upornost in toplotna
prehodnost – Računska metoda (ISO 6946:1996) (nadomeščen s SIST EN ISO
6946, Gradbene komponente in gradbeni elementi – Toplotna upornost in
toplotna prehodnost – Računska metoda (ISO 6946:2007))
SIST EN ISO 10077-1 Toplotne lastnosti oken, vrat in polken – Izračun toplotne prehodnosti – 1. del:
Splošno (ISO 10077-1:2000) (nadomeščen s SIST EN ISO 10077-1:2007,
Toplotne lastnosti oken, vrat in polken – Izračun toplotne prehodnosti – 1. del:
Splošno (ISO 10077-1:2006))
SIST EN ISO 10077-2 Toplotne lastnosti oken, vrat in polken – Izračun toplotne prehodnosti – 2. del:
Računska metoda za okvirje (ISO/DIS 10077-2:1998) (nadomeščen s
SIST EN ISO 10077-2:2012, Toplotne lastnosti oken, vrat in polken – Izračun
toplotne prehodnosti – 2. del: Računska metoda za okvirje (ISO 10077-
2:2012))
SIST EN ISO 10211-1 Toplotni mostovi v zgradbah – Toplotni tokovi in površinske temperature – 1.
del: Splošni računski postopki (ISO 10211-1:1995) (nadomeščen s SIST EN
ISO 10211:2008, Toplotni mostovi v stavbah – Toplotni tokovi in površinske
temperature – Podrobni izračuni (ISO 10211:2007))
SIST EN ISO 10211-2 Toplotni mostovi v stavbah – Računanje toplotnih tokov in površinskih
temperatur – 2. del: Linearni toplotni mostovi (ISO 10211-2:2001) (nadomeščen s
SIST EN ISO 10211:2008, Toplotni mostovi v stavbah – Toplotni tokovi in
površinske temperature – Podrobni izračuni (ISO 10211:2007))
SIST EN ISO 10456 Gradbeni materiali in proizvodi – Postopki za določevanje nazivnih in
računskih vrednosti toplotnih vrednosti (ISO 10456:1999) (nadomeščen s
SIST EN ISO 10456:2008, Gradbeni materiali in proizvodi – Higrotermalne
lastnosti – Tabelirane računske vrednosti in postopki za določevanje nazivnih
in računskih vrednosti toplotnih vrednosti (ISO 10456:2007))
SIST EN ISO 13370 Toplotne karakteristike stavb
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.