EN ISO 7751:1997/A1:2011

Rubber and plastics hoses and hose assemblies - Ratios of proof and burst pressure to maximum working pressure - Amendment 1 - Replacement of "design working pressure" by "maximum working pressure" throughout text (ISO 7751:1991/Amd 1:2011)

MINOR AMENDMENT!!!      MINOR AMENDMENT!!!      MINOR AMENDMENT!!!      MINOR AMENDMENT!!!

Gummi- und Kunststoffschläuche und Schlauchleitungen - Verhältnisse von Prüf- und Berstdruck zur Auslegung des maximalen Betriebsdruckes - Ändrung 1 - Austausch der Begriffe Auslegungsdruck durch maximaler Betriebsdruck über den ganzen Rex (ISO 7751:1997/Amd 1:2011)

Tuyaux et flexibles en caoutchouc et en plastique - Rapports des pressions d'épreuve et d'éclatement à la pression maximale de service - Amendement 1 - Remplacement de "pression de service" par "pression maximale de service" dans l'ensemble du texte (ISO 7751:1991/Amd 1:2011)

Gumene in polimerne cevi ter cevni priključki - Razmerja preskusnega in razpočnega tlaka za načrtovanje najvišjega delovnega tlaka - Dopolnilo 1 - Nadomestitev "načrtovani delovni tlak" z "najvišji delovni tlak" v celotnem besedilu (ISO 7751:1991/Amd 1:2011)

Ta mednarodni standard določa razmerja preskusnega in minimalnega razpočnega tlaka za načrtovanje delovnega tlaka za različne kategorije cevnih storitev. Metode in postopki za izvedbo preskusnega in razpočnega preskusa so določeni s standardom ISO 1402.

General Information

• Status: Withdrawn
• Publication Date: 14-May-2011
• Withdrawal Date: 29-Nov-2016
• ICS: 23.040.70 - Hoses and hose assemblies
• Technical Committee: CEN/TC 218 - Rubber and plastics hoses and hose assemblies
• Drafting Committee: CEN/TC 218 - Rubber and plastics hoses and hose assemblies
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 30-Nov-2016
• Ref Project: SIST EN ISO 7751:2000/A1:2014 - Rubber and plastics hoses and hose assemblies - Ratios of proof and burst pressure to maximum working pressure - Amendment 1 - Replacement of "design working pressure" by "maximum working pressure" throughout text (ISO 7751:1991/Amd 1:2011)

Relations

• Replaced By: EN ISO 7751:2016 - Rubber and plastics hoses and hose assemblies - Ratios of proof and burst pressure to maximum working pressure (ISO 7751:2016)
• Effective Date: 07-Dec-2016
• Amends: EN ISO 7751:1997 - Rubber and plastics hoses and hose assemblies - Ratios of proof and burst pressure to design working pressure (ISO 7751:1991)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
01-maj-2014
*XPHQHLQSROLPHUQHFHYLWHUFHYQLSULNOMXþNL5D]PHUMDSUHVNXVQHJDLQ
UD]SRþQHJDWODND]DQDþUWRYDQMHQDMYLãMHJDGHORYQHJDWODND'RSROQLOR
1DGRPHVWLWHYQDþUWRYDQLGHORYQLWODN]QDMYLãMLGHORYQLWODNYFHORWQHP
EHVHGLOX,62$PG
Rubber and plastics hoses and hose assemblies - Ratios of proof and burst pressure to
maximum working pressure - Amendment 1 - Replacement of "design working pressure"
by "maximum working pressure" throughout text (ISO 7751:1991/Amd 1:2011)
Gummi- und Kunststoffschläuche und Schlauchleitungen - Verhältnisse von Prüf- und
Berstdruck zur Auslegung des maximalen Betriebsdruckes - Ändrung 1 - Austausch der
Begriffe Auslegungsdruck durch maximaler Betriebsdruck über den ganzen Rex (ISO
7751:1997/Amd 1:2011)
Tuyaux et flexibles en caoutchouc et en plastique - Rapports des pressions d'épreuve et
d'éclatement à la pression maximale de service - Amendement 1 - Remplacement de
"pression de service" par "pression maximale de service" dans l'ensemble du texte (ISO
7751:1991/Amd 1:2011)
Ta slovenski standard je istoveten z: EN ISO 7751:1997/A1:2011
ICS:
23.040.70 Gumene cevi in armature Hoses and hose assemblies
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 7751:1997/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2011
ICS 23.040.70
English Version
Rubber and plastics hoses and hose assemblies - Ratios of
proof and burst pressure to maximum working pressure -
Amendment 1 - Replacement of "design working pressure" by
"maximum working pressure" throughout text (ISO
7751:1991/Amd 1:2011)
Tuyaux et flexibles en caoutchouc et en plastique - Gummi- und Kunststoffschläuche und Schlauchleitungen -
Rapports des pressions d'épreuve et d'éclatement à la Verhältnisse von Prüf- und Berstdruck zur Auslegung des
pression maximale de service - Amendement 1 - maximalen Betriebsdruckes - Änderung 1 (ISO
Remplacement de "pression de service" par "pression 7751:1991/Amd 1:2011)
maximale de service" dans l'ensemble du texte (ISO
7751:1991/Amd 1:2011)
This amendment A1 modifies the European Standard EN ISO 7751:1997; it was approved by CEN on 14 May 2011.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 7751:1997/A1:2011: E
worldwide for CEN national Members.

Contents Page
Foreword .3

Foreword
This document (EN ISO 7751:1997/A1:2011) has been prepared by Technical Committee ISO/TC 45 "Rubber
and rubber products" in collaboration with Technical Committee CEN/TC 218 “Rubber and plastics hoses and
hose assemblies” the secretariat of which is held by BSI.
This Amendment to the European Standard shall be given the status of a national standard, either by
publication of an identical text or by endorsement, at the latest by November 2011, and conflicting national
standards shall be withdrawn at the latest by November 2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations,
...