EN ISO 8655-7:2022/prA1
(Amendment)Piston-operated volumetric apparatus - Part 7: Alternative measurement procedures for the determination of volume - Amendment 1 (ISO 8655-7:2022/DAmd 1:2024
Piston-operated volumetric apparatus - Part 7: Alternative measurement procedures for the determination of volume - Amendment 1 (ISO 8655-7:2022/DAmd 1:2024
Volumenmessgeräte mit Hubkolben - Teil 7: Alternative Prüfverfahren zur Bestimmung des Volumens - Änderung 1 (ISO 8655 7:2022/DAM 1:2024)
Appareils volumétriques à piston - Partie 7: Modes opératoires de mesure alternatifs pour la détermination de volumes - Amendement 1 (ISO 8655-7:2022/DAmd 1:2024
Volumetrične naprave, delujoče na bat - 7. del: Nadomestni merilni postopki za določanje prostornine - Dopolnilo A1 (ISO 8655-7:2022/DAmd 1:2024)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 8655-7:2022/oprA1:2024
01-marec-2024
Volumetrične naprave, delujoče na bat - 7. del: Nadomestni merilni postopki za
določanje prostornine - Dopolnilo A1 (ISO 8655-7:2022/DAmd 1:2024)
Piston-operated volumetric apparatus - Part 7: Alternative measurement procedures for
the determination of volume - Amendment 1 (ISO 8655-7:2022/DAmd 1:2024)
Volumenmessgeräte mit Hubkolben - Teil 7: Alternative Prüfverfahren zur Bestimmung
des Volumens - Änderung 1 (ISO 8655 7:2022/DAM 1:2024)
Appareils volumétriques à piston - Partie 7: Modes opératoires de mesure alternatifs
pour la détermination de volumes - Amendement 1 (ISO 8655-7:2022/DAmd 1:2024)
Ta slovenski standard je istoveten z: EN ISO 8655-7:2022/prA1
ICS:
17.060 Merjenje prostornine, mase, Measurement of volume,
gostote, viskoznosti mass, density, viscosity
71.040.20 Laboratorijska posoda in Laboratory ware and related
aparati apparatus
SIST EN ISO 8655-7:2022/oprA1:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 8655-7:2022/oprA1:2024
---------------------- Page: 2 ----------------------
SIST EN ISO 8655-7:2022/oprA1:2024
DRAFT AMENDMENT
ISO 8655-7:2022/DAM 1
ISO/TC 48 Secretariat: DIN
Voting begins on: Voting terminates on:
2024-01-08 2024-04-01
Piston-operated volumetric apparatus —
Part 7:
Alternative measurement procedures for the
determination of volume
AMENDMENT 1
Appareils volumétriques à piston —
Partie 7: Modes opératoires de mesure alternatifs pour la détermination de volumes
AMENDEMENT 1
ICS: 17.060
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO 8655-7:2022/DAM 1:2024(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2024
---------------------- Page: 3 ----------------------
SIST EN ISO 8655-7:2022/oprA1:2024
ISO 8655-7:2022/DAM 1:2024(E)
DRAFT AMENDMENT
ISO 8655-7:2022/DAM 1
ISO/TC 48 Secretariat: DIN
Voting begins on: Voting terminates on:
Piston-operated volumetric apparatus —
Part 7:
Alternative measurement procedures for the
determination of volume
AMENDMENT 1
Appareils volumétriques à piston —
Partie 7: Modes opératoires de mesure alternatifs pour la détermination de volumes
AMENDEMENT 1
ICS: 17.060
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2024
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: +41 22 749 01 11
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: copyright@iso.org
NATIONAL REGULATIONS.
Website: www.iso.org ISO 8655-7:2022/DAM 1:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
© ISO 2024 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023
---------------------- Page: 4 ----------------------
SIST EN ISO 8655-7:2022/oprA1:2024
ISO 8655-7:2022/DAM 1:2023(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represent
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.