EN ISO 15874-5:2013

Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 5: Fitness for purpose of the system (ISO 15874-5:2013)

ISO 15874-5:2013 specifies the characteristics of the fitness for purpose of polypropylene (PP) piping systems, intended to be used for hot and cold water installations within buildings for the conveyance of water, whether or not intended for human consumption (domestic systems) and for heating systems, under design pressures and temperatures according to the class of application.
It covers a range of service conditions (classes of application) and design pressure classes.
It also specifies test parameters for test methods.
In conjunction with the other parts of ISO 15874, it is applicable to PP pipes, fittings, their joints and to joints with components of other plastics and non-plastics materials intended to be used for hot and cold water installations.

Kunststoff-Rohrleitungssysteme für die Warm- und Kaltwasserinstallation - Polypropylen (PP) - Teil 5: Gebrauchstauglichkeit des Systems (ISO 15874-5:2013)

Dieser Teil der ISO 15874 legt Anforderungen an die Gebrauchstauglichkeit von Rohrleitungssystemen aus Polypropylen (PP) fest, die in der Warm- und Kaltwasserinstallation innerhalb von Gebäuden für den Transport von Trink- oder Brauchwasser (Hausinstallation) sowie für Heizungsanlagen unter Berücksichtigung des betreffenden zulässigen Betriebsdruckes und der für die jeweilige Anwendungsklasse geltenden Temperaturen (siehe ISO 15874-1, Tabelle 1) eingesetzt werden.
Diese Norm enthält Festlegungen zu Anwendungsklassen, die sich auf Betriebsbedingungen beziehen, sowie Festlegungen über zulässige Betriebsdrücke. Diese Norm gilt nicht, wenn für TD, Tmax und Tmal höhere als die in Tabelle 1 von Teil 1 dieser Norm aufgeführten Werte zugrunde gelegt werden.
ANMERKUNG   Der Anwender bzw. Auftraggeber ist unter Berücksichtigung der eigenen Anforderungen sowie der geltenden nationalen Festlegungen und Verlegepraktiken für die entsprechende Auswahl dieser Kriterien verantwortlich.
Sie legt auch die Prüfparameter für die Prüfverfahren fest, auf die in dieser Norm verwiesen wird.
Zusammen mit den übrigen Teilen der ISO 15874 (siehe Vorwort) gilt dieser Teil für Rohre und Formstücke aus PP, deren Verbindungen untereinander sowie mit Rohrleitungsteilen aus anderen Kunststoffen oder metallenen Werkstoffen, die für die Warm- und Kaltwasserinstallation vorgesehen sind.

Systèmes de canalisations en plastique pour les installations d'eau chaude et froide - Polypropylene (PP) - Partie 5: Aptitude à l'emploi du système (ISO 15874-5:2013)

L'ISO 15874-5:2013 spécifie les caractéristiques d'aptitude à l'emploi des systèmes de canalisations en polypropylène (PP) destinés à des installations d'eau chaude et froide à l'intérieur des bâtiments pour le transport de l'eau, que celle-ci soit destinée ou non à la consommation humaine (systèmes domestiques) et à des installations de chauffage à des pressions et des températures de service correspondant à la classe d'application.
L'ISO 15874-5:2013 couvre une gamme de conditions de service (classes d'application) et de classes de pression de service.
Elle spécifie aussi les paramètres d'essai pour les méthodes d'essai.
Conjointement avec les autres parties de l' ISO 15874, l'ISO 15874-5:2013 s'applique aux tubes en polypropylène (PP), aux raccords, à leurs assemblages et aux assemblages avec des composants faits en d'autres matières, plastiques et non plastiques, destinés à être utilisés avec des installations d'eau chaude et froide.

Cevni sistemi iz polimernih materialov za napeljave z vročo in hladno vodo - Polipropilen (PP) - 5. del: Ustreznost sistema namenu (ISO 15874-5:2013)

Ta del standarda ISO 15874 določa značilnosti ustreznosti namenu za cevne sisteme iz polipropilena (PP), ki se uporabljajo za napeljave z vročo in hladno vodo za prenos pitne in nepitne vode v stavbah (gospodinjski sistemi), ter za sisteme ogrevanja glede na predvidene tlake in temperature v skladu z razredom uporabe (glej preglednico 1 v standardu ISO 15874-1:2013). Ta del standarda ISO 15874 zajema različne pogoje uporabe (razrede uporabe) in razrede predvidenih tlakov. Ne uporablja se za vrednosti TD, Tmaks in Tmal, ki presegajo vrednosti iz preglednice 1 standarda ISO 15874-1:2013. OPOMBA: Za ustrezno izbiro teh vidikov je odgovoren kupec ali projektant, pri čemer mora upoštevati posebne zahteve ter vse pomembne nacionalne predpise in prakse ali kodekse vgradnje. Določa tudi preskusne parametre za preskusne metode iz tega dela standarda ISO 15874. V povezavi z drugimi deli standarda ISO 15874 se uporablja za polipropilenske cevi, fitinge, njihove spoje ter spoje s komponentami iz drugih polimernih in nepolimernih materialov, namenjene uporabi v napeljavah z vročo in hladno vodo.

General Information

• Status: Published
• Publication Date: 19-Feb-2013
• Withdrawal Date: 30-Aug-2013
• ICS: 23.040.01 - Pipeline components and pipelines in general
• ICS: 23.040.20 - Plastics pipes
• ICS: 91.140.60 - Water supply systems
• Technical Committee: CEN/TC 155 - Plastics piping systems and ducting systems
• Drafting Committee: CEN/TC 155/WG 16 - Systems for hot and cold water applications
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 20-Feb-2013
• Due Date: 20-Dec-2012
• Completion Date: 20-Feb-2013
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Ref Project: SIST EN ISO 15874-5:2013 - Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 5: Fitness for purpose of the system (ISO 15874-5:2013)

Relations

• Replaces: EN ISO 15874-5:2003 - Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 5: Fitness for purpose of the system (ISO 15874-5:2003)
• Effective Date: 01-Apr-2009
• Amended By: EN ISO 15874-5:2013/A1:2018 - Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 5: Fitness for purpose of the system - Amendment 1 (ISO 15874-5:2013/Amd 1:2018)
• Effective Date: 15-Oct-2014

Standards Content (Sample)

SLOVENSKI STANDARD
01-april-2013
1DGRPHãþD
SIST EN ISO 15874-5:2004
&HYQLVLVWHPLL]SROLPHUQLKPDWHULDORY]DQDSHOMDYH]YURþRLQKODGQRYRGR
3ROLSURSLOHQ33GHO8VWUH]QRVWVLVWHPDQDPHQX,62
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 5:
Fitness for purpose of the system (ISO 15874-5:2013)
Kunststoff-Rohrleitungssysteme für die Warm- und Kaltwasserinstallation - Polypropylen
(PP) - Teil 5: Gebrauchstauglichkeit des Systems (ISO 15874-5:2013)
Systèmes de canalisations en plastique pour les installations d'eau chaude et froide -
Polypropylene (PP) - Partie 5: Aptitude à l'emploi du système (ISO 15874-5:2013)
Ta slovenski standard je istoveten z: EN ISO 15874-5:2013
ICS:
23.040.20 Cevi iz polimernih materialov Plastics pipes
91.140.60 Sistemi za oskrbo z vodo Water supply systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 15874-5
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2013
ICS 91.140.60; 23.040.20 Supersedes EN ISO 15874-5:2003
English Version
Plastics piping systems for hot and cold water installations -
Polypropylene (PP) - Part 5: Fitness for purpose of the system
(ISO 15874-5:2013)
Systèmes de canalisations en plastique pour les Kunststoff-Rohrleitungssysteme für die Warm- und
installations d'eau chaude et froide - Polypropylene (PP) - Kaltwasserinstallation - Polypropylen (PP) - Teil 5:
Partie 5: Aptitude à l'emploi du système (ISO 15874- Gebrauchstauglichkeit des Systems (ISO 15874-5:2013)
5:2013)
This European Standard was approved by CEN on 5 January 2013.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15874-5:2013: E
worldwide for CEN national Members.

Contents Page
Foreword . 3

Foreword
This document (EN ISO 15874-5:2013) has been prepared by Technical Committee CEN/TC 155 “Plastics
piping systems and ducting systems” the secretariat of which is held by NEN, in collaboration with Technical
Committee ISO/TC 138 “Plastics pipes, fittings and valves for the transport of fluids”.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by August 2013, and conflicting national standards shall be withdrawn at
the latest by August 2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 15874-5:2003.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
INTERNATIONAL ISO
STANDARD 15874-5
Second edition
2013-02-15
Plastics piping systems for hot and cold
water installations — Polypropylene (PP) —
Part 5:
Fitness for purpose of the system
Systèmes de canalisations en plastique pour les installations d’eau
chaude et froide — Polypropylene (PP) —
Partie 5: Aptitude à l’emploi du système
Reference number
ISO 15874-5:2013(E)
©
ISO 2013
ISO 15874-5:2013(E)
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO’s
member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
ii © ISO 2013 – All rights reserved

ISO 15874-5:2013(E)
Contents Page
Foreword .iv
Introduction . v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions, symbols and abbreviated terms . 2
4 Fitness for purpose of the joints and the piping system. 2
4.1 General . 2
4.2 Internal pressure test . 2
4.3 Bending test . 5
4.4 Pull-out test . 7
4.5 Thermal cycling test . 7
4.6 Pressure cycling test . 8
4.7 Leak tightness under vacuum . 8
Bibliography . 9
ISO 15874-5:2013(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International
Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
ISO 15874-5 was prepared by Technical Committee CEN/TC 155, Plastics piping systems and ducting systems,
in collaboration with Technical Committee ISO/TC 138, Plastics pipes, fittings and valves for the transport of
fluids, and Subcommittee SC 2, Plastics pipes and fittings for water supplies, in accordance with the Agreement
on technical cooperation between ISO and CEN (Vienna Agreement).
This second edition cancels and replaces the first edition (ISO 15874-5:2003), which has been technically
revised. In 4.2, Tables 2, 3 and 4, values have been adjusted; in Table 5, the material PP-RCT has been
included; and in 4.3, Tables 6, 7 and 8, values have been adjusted.
1)
ISO 15874 consists of the following parts under the general title Plastics piping systems for hot and cold water
installations — Polypropylene (PP):
— Part 1: General;
— Part 2: Pipes;
— Part 3: Fittings;
— Part 5: Fitness for purpose of the system;
— Part 7: Guidance for the assessment of conformity [Technical specification].
1) For ancillary equipment separate standards can apply. Guidance on installation of plastics piping systems made from
different materials intended to be used for hot and cold water installations is given by CEN/TR 12108 [1].
iv © ISO 2013 – All rights reserved

ISO 15874-5:2013(E)
Introduction
This part of ISO 15874 specifies the requirements for a piping system and its components when made from
polypropylene (PP). The piping system is intended to be used for hot and cold water installations.
Regarding potential undesirable effects on the quality of water intended for human consumption, caused by
the product covered by ISO 15874
— no information is provided as to whether the product can be used without restriction, and
— existing national regulations concerning the use and/or the characteristics of this product remain in force.
Requirements and test methods for components of the piping system are specified in ISO 15874-1, ISO 15874-2
and ISO 15874-3. ISO/TS 15874-7 gives guidance for the assessment of conformity.
This part of ISO 15874 specifies the characteristics of fitness for purpose of the piping systems.
At the date of publication of this part of ISO 15874, the following system International Standards for piping
systems of other plastics materials used for the same application are
— ISO 15875, Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X)
— ISO 15876, Plastics piping systems for hot and cold water installations — Polybutylene (PB)
— ISO 15877, Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl
chloride) (PVC-C)
— ISO 22391, Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature
resistance (PE-RT)
The International Organization for Standardization (ISO) draws attention to the fact that it is claimed that
compliance with this document may involve the use of a patent.
ISO takes no position concerning the evidence, validity and scope of this patent right.
The holder of this patent right has assured ISO that they are willing to negotiate licences under reasonable and
non-discriminatory terms and conditions with applicants throughout the world. In this respect, the statement of
the holder of this patent right is registered with ISO. Information may be obtained from:
Borealis AG
Wagramerstrasse 17-19, A-1220,
Vienna, Austria
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights
other than those identified above. ISO shall not be held responsible for identifying any or all such patent rights.
ISO (www.iso.org/patents) and IEC (http://patents.iec.ch) maintain on-line databases of patents relevant to their
standards. Users are encouraged to consult the databases for the most up to date information concerning patents.
INTERNATIONAL STANDARD ISO 15874-5:2013(E)
Plastics piping systems for hot and cold water installations —
Polypropylene (PP) —
Part 5:
Fitness for purpose of the system
1 Scope
This part of ISO 15874 specifies the characteristics of the fitness for purpose of polypropylene (PP) piping
systems, intended to be used for hot and cold water installations within buildings for the conveyance of water,
whether or not intended for human consumption (domestic systems) and for heating systems, under design
pressures and temperatures according to the class of application (see Table 1 of ISO 15874-1:2013).
This part of ISO 15874 covers a range of service conditions (classes of application) and design pressure
classes. For values of T , T and T in excess of those in Table 1 of ISO 15874-1:2013 does not apply.
D max mal
NOTE It is the responsibility of the purchaser or specifier
...