EN 113-1:2020
(Main)Durability of wood and wood-based products - Test method against wood destroying basidiomycetes - Part 1: Assessment of biocidal efficacy of wood preservatives
Durability of wood and wood-based products - Test method against wood destroying basidiomycetes - Part 1: Assessment of biocidal efficacy of wood preservatives
This document specifies a method for determining the efficacy of wood preservatives applied to wood by penetration treatment against wood destroying basidiomycetes cultured on a malt extract agar medium.
The method is applicable to formulated products or to their active ingredients.
NOTE This method can be used in conjunction with an ageing procedure, for example EN 73 or EN 84.
Annex A (informative) contains an example of a test report.
Annex B (normative) contains some methods of sterilization.
Annex C (informative) contains information on the test vessels.
Annex D (informative) contains information on test fungi.
Annex E (informative) contains a recommended but non-comprehensive list of optional fungi.
Dauerhaftigkeit von Holz und Holzprodukten — Prüfverfahren in Bezug auf Holz zerstörende Basidiomyceten — Teil 1: Bewertung der bioziden Wirksamkeit von Holzschutzmitteln
Dieses Dokument legt ein Prüfverfahren zur Bestimmung der Wirksamkeit von Holzschutzmitteln gegen Holz zerstörende, auf Malzextrakt-Agarnährmedium gezüchtete Basidiomyceten fest, nachdem die Mittel durch ein Tränkverfahren in das Holz eingebracht wurden.
Dieses Verfahren ist auf formulierte Produkte oder deren Wirkstoffe anwendbar.
ANMERKUNG Dieses Verfahren kann in Verbindung mit einer Alterungsbeanspruchung, z. B. nach EN 73 oder EN 84, angewendet werden.
Anhang A (informativ) enthält ein Beispiel für einen Prüfbericht.
Anhang B (normativ) enthält einige Sterilisationsverfahren.
Anhang C (informativ) enthält Informationen zu den Prüfgefäßen.
Anhang D (informativ) enthält Informationen zu Prüfpilzen.
Anhang E (informativ) enthält eine Liste von empfohlenen fakultativen Prüfpilzen, die jedoch weitere Prüf-pilze nicht ausschließt.
Durabilité du bois et des matériaux dérivés du bois - Méthode d'essai vis-à-vis des champignons basidiomycètes - Partie 1 : Détermination de l'efficacité protectrice de produits de préservation
Le présent document décrit une méthode de détermination de l'efficacité d'un produit de préservation du bois, appliqué par traitement par imprégnation profonde, vis-à-vis des champignons basidiomycètes lignivores cultivés sur milieu malt-agar.
La méthode est applicable aux produits formulés ou à leurs matières actives.
NOTE Cette méthode peut être utilisée conjointement avec une épreuve de vieillissement, par exemple selon l'EN 73 ou l'EN 84.
L'Annexe A (informative) donne un exemple de rapport d'essai.
L'Annexe B (normative) donne plusieurs méthodes de stérilisation.
L'Annexe C (informative) donne des informations sur les flacons d'essai.
L'Annexe D (informative) donne des informations sur les champignons d'essai.
L'Annexe E
Trajnost lesa in lesnih proizvodov - Preskusna metoda proti glivam prostotrosnicam - 1. del: Ocenjevanje biocidne učinkovitosti biocidnih proizvodov za les
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-marec-2021
Nadomešča:
SIST EN 113:2002
SIST EN 113:2002/A1:2004
Trajnost lesa in lesnih proizvodov - Preskusna metoda proti glivam
prostotrosnicam - 1. del: Ocenjevanje biocidne učinkovitosti biocidnih proizvodov
za les
Durability of wood and wood-based products - Test method against wood destroying
basidiomycetes - Part 1: Assessment of biocidal efficacy of wood preservatives
Dauerhaftigkeit von Holz und Holzprodukten - Prüfverfahren gegen Holz zerstörende
Basidiomyceten - Teil 1: Bewertung der bioziden Wirksamkeit von Holzschutzmitteln
Durabilité du bois et des matériaux dérivés du bois - Méthode d'essai vis-à-vis des
champignons basidiomycètes - Partie 1 : Détermination de l'efficacité protectrice de
produits de préservation
Ta slovenski standard je istoveten z: EN 113-1:2020
ICS:
71.100.50 Kemikalije za zaščito lesa Wood-protecting chemicals
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN 113-1
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2020
EUROPÄISCHE NORM
ICS 71.100.50 Supersedes EN 113:1996,
EN 113:1996/A1:2004
English Version
Durability of wood and wood-based products - Test
method against wood destroying basidiomycetes - Part 1:
Assessment of biocidal efficacy of wood preservatives
Durabilité du bois et des matériaux dérivés du bois - Dauerhaftigkeit von Holz und Holzprodukten -
Méthode d'essai vis-à-vis des champignons Prüfverfahren gegen Holz zerstörende Basidiomyceten
basidiomycètes - Partie 1 : Détermination de l'efficacité - Teil 1: Bewertung der bioziden Wirksamkeit von
protectrice de produits de préservation Holzschutzmitteln
This European Standard was approved by CEN on 2 November 2020.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 113-1:2020 E
worldwide for CEN national Members.
Contents Page
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Principles . 6
5 Test material and apparatus . 6
5.1 Biological material . 6
5.1.1 General . 6
5.1.2 Obligatory fungi in all cases (see also Annex D) . 6
5.1.3 Obligatory fungus for particular uses (see also Annex D) . 7
5.1.4 Maintenance of strains . 7
5.2 Products and reagents . 7
5.2.1 Culture medium . 7
5.2.2 Solvents and diluents . 8
5.3 Apparatus . 8
5.3.1 Conditioning chamber . 8
5.3.2 Culture chamber . 8
5.3.3 Drying oven . 8
5.3.4 Treatment vessels . 8
5.3.5 Ballast . 8
5.3.6 Safety equipment and protective clothing . 8
5.3.7 Vacuum vessels . 9
5.3.8 Vacuum pump . 9
5.3.9 Kolle flasks or equivalent culture vessels . 9
5.3.10 Test specimen supports . 9
5.3.11 Drying vessel(s) . 9
5.3.12 Equipment for steam sterilization or access to a radiation source . 9
5.3.13 Ordinary laboratory equipment . 9
6 Sampling of the preservative . 9
7 Test specimens . 9
7.1 Wood species . 9
7.2 Wood quality . 10
7.3 Provision of test specimens . 10
7.4 Dimensions and density of test specimens. 10
7.5 Number and distribution of test specimens. 10
8 Procedure . 11
8.1 Conditioning of test specimens before treatment . 11
8.2 Treatment of test specimens . 11
8.2.1 Preparation of treatment solutions/dilutions . 11
8.2.2 Impregnation . 12
8.3 Drying and conditioning of test specimens after treatment . 12
8.4 Exposure to fungi . 13
8.5 Culture conditions and duration of test . 13
8.6 Assessment of test . 14
8.6.1 Examination of the test specimens . 14
8.6.2 Loss in mass caused by fungal attack . 14
8.6.3 Validity of results . 14
8.6.4 Assessment of results . 15
9 Statement of results . 15
10 Test report . 15
Annex A (informative) Example of a test report . 17
Annex B (normative) Methods of sterilization . 23
Annex C (informative) Culture vessels . 24
Annex D (informative) Test fungi . 27
Annex E (informative) Non-comprehensive list of optional fungi . 29
Bibliography . 31
European foreword
This document (EN 113-1:2020) has been prepared by Technical Committee CEN/TC 38 “Durability of
wood and wood-based products”, the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2021, and conflicting national standards shall be
withdrawn at the latest by June 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 113:1996 and EN 113:1996/A1:2004.
Test results obtained with earlier versions of EN 113 are still valid.
Compared to EN 113:1996 and EN 113:1996/A1:2004 the following major changes have been
introduced:
— This is now a first part of EN 113 corresponding to the EN 113:1996 document. Other parts relate
to a different scope.
— The title is changed;
— The obligatory fungi are indicated differently;
— The calculation of a correction factor (C) has been differently included;
— The methods for sterilization are updated;
— All annexes are informative except Annex B;
— Some additional validity requirements are introduced for control specimens.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,
Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North
Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United
Kingdom.
Introduction
This document describes a laboratory method of test, which gives a basis for the assessment of
effectiveness of a wood preservative against wood destroying basidiomycetes. By using this method it is
possible to determine the loading at which impregnated wood of a susceptible species can regarded as
adequately protected under the conditions of test.
This laboratory method p
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.