EN ISO 20932-2:2020
(Main)Textiles - Determination of the elasticity of fabrics - Part 2: Multiaxial tests (ISO 20932-2:2018)
Textiles - Determination of the elasticity of fabrics - Part 2: Multiaxial tests (ISO 20932-2:2018)
This document specifies the test methods which can be used to measure elasticity and related properties of fabrics when they undergo a deformation of their surface. Two methods are specified: a dynamic method (method A) and a static method (method B). This document does not apply to narrow fabrics.
The results obtained cannot be compared. The choice of test method are agreed between parties and indicated in the test report.
Textilien - Bestimmung der Elastizität von textilen Flächengebilden - Teil 2: Multiaxiale Prüfungen (ISO 20932-2:2018)
Dieses Dokument legt die Prüfverfahren fest, die zur Messung der Elastizität und zugehöriger Eigenschaften von textilen Flächengebilden angewendet werden können, wenn deren Oberfläche einer Verformung ausgesetzt wird. Zwei Verfahren werden festgelegt: ein dynamisches Verfahren (Verfahren A) und ein statisches Verfahren (Verfahren B). Dieses Dokument ist nicht anzuwenden für Schmaltextilien.
Die erhaltenen Ergebnisse können nicht verglichen werden. Die Wahl des Prüfverfahrens wird zwischen den Parteien vereinbart und im Prüfbericht angegeben.
Textiles - Détermination de l'élasticité des étoffes - Partie 2: Essais multiaxiaux (ISO 20932-2:2018)
Le présent document spécifie les méthodes d'essai qui peuvent être appliquées pour mesurer l'élasticité et les propriétés afférentes des étoffes lorsqu'elles sont soumises à la déformation de leur surface. Il spécifie deux méthodes: une méthode dynamique (méthode A) et une méthode statique (méthode B). Le présent document ne s'applique pas aux étoffes étroites.
Les résultats obtenus ne peuvent être comparés. Le choix de la méthode fait l'objet d'un accord entre les parties intéressées et est indiqué dans le rapport d'essai.
Tekstilije - Ugotavljanje elastičnosti tkanin - 2. del: Večosni preskusi (ISO 20932-2:2018)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-maj-2020
Nadomešča:
SIST EN 14704-2:2007
Tekstilije - Ugotavljanje elastičnosti tkanin - 2. del: Večosni preskusi (ISO 20932-
2:2018)
Textiles - Determination of the elasticity of fabrics - Part 2: Multiaxial tests (ISO 20932-
2:2018)
Textilien - Bestimmung der Elastizität von textilen Flächengebilden - Teil 2: Multiaxiale
Prüfungen (ISO 20932-2:2018)
Textiles - Détermination de l'élasticité des étoffes - Partie 2: Essais multiaxiaux (ISO
20932-2:2018)
Ta slovenski standard je istoveten z: EN ISO 20932-2:2020
ICS:
59.080.01 Tekstilije na splošno Textiles in general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 20932-2
EUROPEAN STANDARD
NORME EUROPÉENNE
February 2020
EUROPÄISCHE NORM
ICS 59.080.30 Supersedes EN 14704-2:2007
English Version
Textiles - Determination of the elasticity of fabrics - Part 2:
Multiaxial tests (ISO 20932-2:2018)
Textiles - Détermination de l'élasticité des étoffes - Textilien - Bestimmung der Elastizität von textilen
Partie 2: Essais multiaxiaux (ISO 20932-2:2018) Flächengebilden - Teil 2: Multiaxiale Prüfungen (ISO
20932-2:2018)
This European Standard was approved by CEN on 11 November 2019.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 20932-2:2020 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
The text of ISO 20932-2:2018 has been prepared by Technical Committee ISO/TC 38 "Textiles” of the
International Organization for Standardization (ISO) and has been taken over as EN ISO 20932-2:2020
by Technical Committee CEN/TC 248 “Textiles and textile products” the secretariat of which is held by
BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by August 2020, and conflicting national standards shall
be withdrawn at the latest by August 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 14704-2:2007.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 20932-2:2018 has been approved by CEN as EN ISO 20932-2:2020 without any
modification.
INTERNATIONAL ISO
STANDARD 20932-2
First edition
2018-11
Textiles — Determination of the
elasticity of fabrics —
Part 2:
Multiaxial tests
Textiles — Détermination de l'élasticité des étoffes —
Partie 2: Essais multiaxiaux
Reference number
ISO 20932-2:2018(E)
©
ISO 2018
ISO 20932-2:2018(E)
© ISO 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved
ISO 20932-2:2018(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 2
5 Sampling . 2
6 Atmosphere for conditioning and testing . 2
7 Preparation of test specimens . 3
8 Method A — Dynamic test . 3
8.1 Apparatus . 3
8.2 Test specimen preparation . 3
8.3 Procedure for loading test specimen in clamping ring . 4
8.4 Recording . 4
8.5 Expressions and calculations of test results . 4
8.6 Test report . 5
9 Method B — Static test . 5
9.1 Preliminary test . 5
9.1.1 Apparatus . 5
9.1.2 Preparation of test specimens . 5
9.1.3 Procedure . 5
9.2 Actual static test . 6
9.2.1 Apparatus . 6
9.2.2 Selection of testing parameters . 6
9.2.3 Preparation of test specimens . 6
9.2.4 Procedure . 6
9.2.5 Setting of the hemispherical shape . 6
9.2.6 Measurement of the residual deformation. 7
9.2.7 Recording . 7
9.2.8 Expressions and calculations of test results . 7
9.2.9 Test report . 7
Annex A (informative) Example of a typical cycling graph . 9
Annex B (informative) Procedure for sampling .10
Annex C (informative) Example of a pattern for cutting test specimens from a laboratory
sample .11
Annex D (informative) Method A — Dynamic test equipment.12
Annex E (informative) Method B — Static test equipment .15
Bibliography .17
ISO 20932-2:2018(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/patents).
Any trade name used in t
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.