iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty!
CEN

FprCEN/TS 17693-2

(Main)

Earthworks - Soil treatment tests - Part 2: Test of evaluation of the aptitude of a dry material to emit dust

Earthworks - Soil treatment tests - Part 2: Test of evaluation of the aptitude of a dry material to emit dust

This document describes the reference method for the determination of the Index of dust emission (IDE) in soil treatment for earthworks.

Erdarbeiten - Prüfungen zur Bodenbehandlung - Teil 2: Prüfung zur Bewertung der Staubemissionsfähigkeit eines trockenen Materials

Dieses Dokument beschreibt das Referenzverfahren zur Bestimmung des Index der Staubemission (IDE) bei der Bodenbehandlung für Erdarbeiten.
Diese Prüfung betrifft insbesondere:
—   Kalk in Übereinstimmung mit EN 459 1, Baukalk — Teil 1: Begriffe, Anforderungen und Konformitätskriterien;
—   Zement in Übereinstimmung mit EN 197 1, Zement — Teil 1: Zusammensetzung, Anforderungen und Konformitätskriterien von Normalzement;
—   Tragschichtbinder in Übereinstimmung mit EN 13282 1, Hydraulische Tragschichtbinder — Teil 1: Schnell erhärtende hydraulische Tragschichtbinder — Zusammensetzung, Anforderungen und Konformitätskriterien;
—   Tragschichtbinder in Übereinstimmung mit EN 13282 2, Hydraulische Tragschichtbinder — Teil 2: Normal erhärtende hydraulische Tragschichtbinder — Zusammensetzung, Anforderungen und Konformitätskriterien;
—   Flugasche in Übereinstimmung mit EN 14227 4, Hydraulisch gebundene Gemische — Anforderungen — Teil 4: Flugasche für hydraulisch gebundene Gemische;
—   kieselhaltige Flugasche in Übereinstimmung mit EN 450 1, Flugasche für Beton — Teil 1: Definition, Anforderungen und Konformitätskriterien;
—   Hüttensandmehl in Übereinstimmung mit EN 15167 1, Hüttensandmehl zur Verwendung in Beton, Mörtel und Einpressmörtel — Teil 1: Definitionen, Anforderungen und Konformitätskriterien.

Terrassements - Essais de traitement de sol - Partie 2 : Test d'évaluation de l'aptitude d'un matériau sec à émettre de la poussière

Ce document décrit la méthode de référence pour la détermination de l'indice d'émission de poussières (IDE) dans le traitement des sols pour les travaux de terrassement.
Ce test concerne plus particulièrement :
—   les chaux conformes à la norme EN 459 -1, Chaux de construction - Partie 1 : définitions, spécifications et critères de conformité ;
—   les ciments conformes à la norme EN 197-1, Ciment - Partie 1 : composition, spécifications et critères de conformité des ciments courants ;
—   les liants routiers conformes à la norme EN 13282-1, Liants hydrauliques routiers - Partie 1 : liants hydrauliques routiers à durcissement rapide - Composition, spécifications et critères de conformité ;
—   les liants routiers conformes à la norme EN 13282-2, Liants hydrauliques routiers - Partie 2 : liants hydrauliques routiers à durcissement normal - Composition, spécifications et critères de conformité ;
—   les cendres volantes conformes à la norme EN 14227-4, Mélanges traités aux liants hydrauliques - Spécifications - Partie 4 : cendre volante pour mélanges traités aux liants hydrauliques ;
—   les cendres volantes siliceuses conformes à la norme EN 450-1, Cendres volantes pour béton - Partie 1 : définition, spécifications et critères de conformité ;
—   le laitier granulé de haut fourneau moulu conforme à la norme EN 15167-1, Laitier granulé de haut-fourneau moulu pour utilisation dans le béton, mortier et coulis - Partie 1 : définitions, exigences et critères de conformité.

Zemeljska dela - Preskusi obdelave zemljin - 2. del: Preskus vrednotenja zmožnosti suhega materiala za emitiranje prahu

General Information

Status
Not Published
ICS
13.080.99 - Other standards related to soil quality
93.020 - Earthworks. Excavations. Foundation construction. Underground works
Technical Committee
CEN/TC 396 - Earthworks
Drafting Committee
CEN/TC 396/WG 8 - Test methods
Current Stage
5060 - Closure of Vote - Formal Approval
Due Date
07-Oct-2021
Completion Date
07-Oct-2021
Ref Project
kSIST-TS FprCEN/TS 17693-2:2021 - Earthworks - Soil treatment tests - Part 2: Test of evaluation of the aptitude of a dry material to emit dust

Buy Standard

-TS FprCEN/TS 17693-2:2021-TS FprCEN/TS 17693-2:2021
PreviousNext
Technical specification
-TS FprCEN/TS 17693-2:2021
English language
14 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
kSIST-TS FprCEN/TS 17693-2:2021
01-september-2021
Zemeljska dela - Preskusi obdelave tal - 2. del: Ugotavljanje prašnosti suhega
materiala

Earthworks - Soil treatment tests - Part 2: Test of evaluation of the aptitude of a dry

material to emit dust
Erdarbeiten - Prüfungen zur Bodenbehandlung - Teil 2: Prüfung zur Bewertung der
Staubemissionsfähigkeit eines trockenen Materials

Terrassements - Essais de traitement de sol - Partie 2 : Test d'évaluation de l'aptitude

d'un matériau sec à émettre de la poussière
Ta slovenski standard je istoveten z: FprCEN/TS 17693-2
ICS:
13.080.99 Drugi standardi v zvezi s Other standards related to
kakovostjo tal soil quality
93.020 Zemeljska dela. Izkopavanja. Earthworks. Excavations.
Gradnja temeljev. Dela pod Foundation construction.
zemljo Underground works
kSIST-TS FprCEN/TS 17693-2:2021 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
kSIST-TS FprCEN/TS 17693-2:2021
---------------------- Page: 2 ----------------------
kSIST-TS FprCEN/TS 17693-2:2021
FINAL DRAFT
TECHNICAL SPECIFICATION
FprCEN/TS 17693-2
SPÉCIFICATION TECHNIQUE
TECHNISCHE SPEZIFIKATION
July 2021
ICS 13.080.99; 93.020
English Version
Earthworks - Soil treatment tests - Part 2: Test of
evaluation of the aptitude of a dry material to emit dust

Terrassements - Essais de traitement de sol - Partie 2 : Erdarbeiten - Prüfungen zur Bodenbehandlung - Teil 2:

Test d'évaluation de l'aptitude d'un matériau sec à Prüfung zur Bewertung der Staubemissionsfähigkeit

émettre de la poussière eines trockenen Materials

This draft Technical Specification is submitted to CEN members for Vote. It has been drawn up by the Technical Committee

CEN/TC 396.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,

Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and

United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are

aware and to provide supporting documentation.

Warning : This document is not a Technical Specification. It is distributed for review and comments. It is subject to change

without notice and shall not be referred to as a Technical Specification.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. FprCEN/TS 17693-2:2021 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
kSIST-TS FprCEN/TS 17693-2:2021
FprCEN/TS 17693-2:2021 (E)
Contents Page

European foreword ............................................................................................................................................ 3

Introduction .......................................................................................................................................................... 4

1 Scope .......................................................................................................................................................... 5

2 Normative references .......................................................................................................................... 5

3 Terms and definitions ......................................................................................................................... 5

4 Abbreviations and symbols ............................................................................................................... 5

5 Principle of the test .............................................................................................................................. 6

6 Equipment ............................................................................................................................................... 6

7 Procedure ................................................................................................................................................ 7

7.1 General...................................................................................................................................................... 7

7.2 Preparation of the test ........................................................................................................................ 7

7.3 Preparation, execution of the test, cleaning and maintenance operations ..................... 7

7.3.1 Presetting................................................................................................................................................. 7

7.3.2 Execution ................................................................................................................................................. 8

7.3.3 At the end of the test ............................................................................................................................ 8

7.3.4 After each test ........................................................................................................................................ 8

8 Expression of the results .................................................................................................................... 8

9 Test report ............................................................................................................................................... 8

Annex A (normative) Figures ....................................................................................................................... 10

Bibliography ....................................................................................................................................................... 14

---------------------- Page: 4 ----------------------
kSIST-TS FprCEN/TS 17693-2:2021
FprCEN/TS 17693-2:2021 (E)
European foreword

This document (FprCEN/TS 17693-2:2021) has been prepared by Technical Committee CEN/TC 396

“Earthworks”, the secretariat of which is held by AFNOR.
This document is currently submitted to the Vote on TS.
---------------------- Page: 5 ----------------------
kSIST-TS FprCEN/TS 17693-2:2021
FprCEN/TS 17693-2:2021 (E)
Introduction

This document describes a laboratory test method making it possible to determine the aptitude of a

material coming from a dry mineral treatment, to emit dust at the time of various stages during an

operation of soil treatment for earthworks (stocking and destocking of the product on jobsite, spreading,

mixing).

The Index of dust emission (I ) determined by this laboratory test is not directly comparable to the real

rate of dust emitted on the jobsite.
---------------------- Page: 6 ----------------------
kSIST-TS FprCEN/TS 17693-2:2021
FprCEN/TS 17693-2:2021 (E)
1 Scope

This document describes the reference method for the determination of the Index of dust emission (I )

in soil treatment for earthworks.
This test concerns more particularly:

— limes in conformity with EN 459-1, Building lime - Part 1: Definitions, specifications and conformity

criteria;

— cements in conformity with EN 197-1, Cement - Part 1: Composition, specifications and conformity

criteria for common cements;

— road binders in conformity with EN 13282-1, Hydraulic road binders - Part 1: Rapid hardening

hydraulic road binders - Composition, specifications and conformity criteria;

— road binders in conformity with EN 13282-2, Hydraulic road binders - Part 2: Normal hardening

hydraulic road binders - Composition, specifications and conformity criteria;

— fly ashes in conformity with EN 14227-4, Hydraulically bound mixtures - Specifications – Part 4: Fly

ash for hydraulically bound mixtures;

— siliceous fly ashes in conformity with EN 450-1, Fly ash for concrete - Part 1: Definition, specifications

and conformity criteria;

— ground-granulated blastfurnace slag in conformity with EN 15167-1, Ground granulated blast

furnace slag for use in concrete, mortar and grout - Part 1: Definitions, specifications and conformity

criteria.
2 Normative references
There are no normative references in this document.
3 Terms and definitions
No terms and definitions are listed in this document.

ISO and IEC maintain terminological databases for use in standardization at the following addresses:

— IEC Electropedia: available at https://www.electropedia.org/
— ISO Online browsing platform: available at https://www.iso.org/obp
4 Abbreviations and symbols
Symbols for quantities
I Index of dust emission dimensionless (%)
m initial mass of the sample put on the sieve and submitted for testing g
m remaining mass of the sample on the sieve at the end of the test g
---------------------- Page: 7 ----------------------
kSIST-TS FprCEN/TS 17693-2:2021
FprCEN/TS 17693-2:2021 (E)
5 Principle of the test
The test consists in determining the percentage of dust carried by air passing t
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 16907-2:2018(Main)
Earthworks - Part 2: Classification of materials
SIST EN 16907-2:2019

This document defines a common basis for description and classification for use by all parties involved in the design, planning and construction of the earthworks.
This document specifies the processes and properties to be used in the description and classification of earthworks materials. It specifies soil and rock groups as a basis of material specifications for earth structure elements. This classification relates to the physical and chemical properties of the soil and rock materials.
NOTE 1 The approach to description of soil and rock set out in EN ISO 14688-1 and EN ISO 14689 respectively and the approach to classification of soil set out in EN ISO 14688-2 are applicable to earthworks, but the range and scope of classification for earthworks given here is more detailed and orientated to the specific demands of earthwork procedures and earth structure elements.
NOTE 2 Informative examples of existing national experience based classification systems and their use are presented in the annexes to EN 16907-1:2018.

  • Standard
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 17685-1(Main)
Earthworks - Chemical tests - Part 1: Determination of organic matter content by loss on ignition
oSIST prEN 17685-1:2021

This document describes a method for the determination of the loss on ignition (wLOI) of fine, intermediate, composite and coarse soils, organic soils and anthropogenic materials (according to EN 16907-2) after ignition under air at 550°C.
The loss of mass suffered by these materials at 550 °C is usually due to the release of volatile compounds, water (absorbed, crystalized or structural) and gases from decomposition of organic matter and inorganic substances such as sulfur, sulphides or hydroxides (e.g. H2O, CO2, SO2).
A method is given in Annex B in order to estimate the organic matter content (COM) from the value of wLOI for clayed soils.

  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
FprCEN/TS 17693-1(Main)
Earthworks - Soil treatment tests - Part 1: pH-test for determination of the lime requirement of soils for stabilization (Lime Fixation Point LFP, Lime Modification Optimum LMO)
kSIST-TS FprCEN/TS 17693-1:2021

This document describes the reference method for the determination of the the Lime Fixation Point (LFP) in soil treatment for earthworks.
The test consists in measuring the lowest quantity of lime to be added in a soil suspension in water, that will result in a pH value of the soil-lime mix suspension of 12,4, measured at 25 +/- 1°C.

  • Technical specification
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16907-2:2018(Main)
Earthworks - Part 2: Classification of materials
SIST EN 16907-2:2019

This document defines a common basis for description and classification for use by all parties involved in the design, planning and construction of the earthworks.
This document specifies the processes and properties to be used in the description and classification of earthworks materials. It specifies soil and rock groups as a basis of material specifications for earth structure elements. This classification relates to the physical and chemical properties of the soil and rock materials.
NOTE 1 The approach to description of soil and rock set out in EN ISO 14688-1 and EN ISO 14689 respectively and the approach to classification of soil set out in EN ISO 14688-2 are applicable to earthworks, but the range and scope of classification for earthworks given here is more detailed and orientated to the specific demands of earthwork procedures and earth structure elements.
NOTE 2 Informative examples of existing national experience based classification systems and their use are presented in the annexes to EN 16907-1:2018.

  • Standard
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 17685-1(Main)
Earthworks - Chemical tests - Part 1: Determination of organic matter content by loss on ignition
oSIST prEN 17685-1:2021

This document describes a method for the determination of the loss on ignition (wLOI) of fine, intermediate, composite and coarse soils, organic soils and anthropogenic materials (according to EN 16907-2) after ignition under air at 550°C.
The loss of mass suffered by these materials at 550 °C is usually due to the release of volatile compounds, water (absorbed, crystalized or structural) and gases from decomposition of organic matter and inorganic substances such as sulfur, sulphides or hydroxides (e.g. H2O, CO2, SO2).
A method is given in Annex B in order to estimate the organic matter content (COM) from the value of wLOI for clayed soils.

  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
FprCEN/TS 17693-1(Main)
Earthworks - Soil treatment tests - Part 1: pH-test for determination of the lime requirement of soils for stabilization (Lime Fixation Point LFP, Lime Modification Optimum LMO)
kSIST-TS FprCEN/TS 17693-1:2021

This document describes the reference method for the determination of the the Lime Fixation Point (LFP) in soil treatment for earthworks.
The test consists in measuring the lowest quantity of lime to be added in a soil suspension in water, that will result in a pH value of the soil-lime mix suspension of 12,4, measured at 25 +/- 1°C.

  • Technical specification
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 9902-6:2021(Main)
Textile machinery - Noise test code - Part 6: Fabric manufacturing machinery (ISO 9902-6:2018)
SIST EN ISO 9902-6:2021

This document covers the different types of weaving and knitting machines defined in ISO 5247 (all parts)[2] and ISO 7839[3], respectively.
It is applicable to:
full-width weaving machines with weft insertion by:
shuttles;
rigid, telescopic or flexible rapiers;
projectiles;
hydraulic (waterjet) or by pneumatic (airjet) nozzle;
narrow fabric weaving machines with weft insertion by shuttles or needles;
jacquard machines;
knitting machinery including:
circular knitting;
flat bed knitting;
warp knitting;
raschel;
cotton (flat weft weaving);
other fabric manufacturing machines e.g.:
multi-phase weaving machines;
circular weaving machines;
stitch bonding machines.
NOTE Because of the high requirements on measurement conditions, grade 1 methods are normally not feasible for textile machinery.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15746-2:2020(Main)
Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements
SIST EN 15746-2:2021

This document specifies the significant hazards, hazardous situations and events, common to self-propelled road-rail machines - henceforward referred to as machines - and associated equipment, arising due to the adaptation for their use on railway networks and urban rail networks. These machines are intended for construction, maintenance and inspection of the railway infrastructure, shunting and emergency rescue vehicles, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer; see Clause 4.
This document deals with the common hazards during assembly and installation, commissioning, travelling on and off track, use including setting, programming, and process changeover, operation, cleaning, fault finding, maintenance and de-commissioning of the machines.
NOTE   Specific measures for exceptional circumstances are not dealt with in this document. They can be subject to negotiation between manufacturer and the machine operator.
The common hazards dealt with include the general hazards presented by the machines, also the hazards presented by the following specific machine functions:
a)   excavation;
b)   ballast tamping, ballast cleaning, ballast regulating, ballast consolidating;
c)   track construction, renewal, maintenance and repair;
d)   lifting;
e)   overhead contact line system renewal / maintenance;
f)   maintenance of the components of the infrastructure;
g)   inspection and measurement of the components of the infrastructure;
h)   working in tunnels;
i)   shunting;
j)   vegetation control;
k)   emergency rescue and recovery;
during commissioning, use, maintenance and servicing.
For a road-rail machine it is assumed that an EU road permissible host vehicle will offer an accepted safety level for its designed basic functions before conversion. Unless explicitly stated otherwise in a particular clause this specific aspect is not dealt with in this document.
This document does not deal with:
1)   requirements with regard to the quality of work and the performance of the machine;
2)   machines that utilize the contact line system for traction purposes;
3)   specific requirements established by a railway Infrastructure Manager or Urban Rail Manager;
4)   negotiations between the manufacturer and the machine operator for additional or alternative requirements;
5)   requirements for use and travel of the machine on public highway;
6)   hazards due to air pressure caused by the passing of high-speed trains at more than 190 km/h;
7)   requirements which could be necessary in case of use in extreme conditions, such as extreme ambient temperatures (tropical or polar); see 5.30;
8)   highly corrosive or contaminating environment, e.g. due to the presence of chemicals;
9)   potentially explosive atmospheres.
Other special machines used on railway tracks are dealt with in other European Standards, see Annex E.

  • Standard
    86 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    79 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 352-10:2020(Main)
Hearing protectors - Safety requirements - Part 10: Entertainment audio earplugs
SIST EN 352-10:2021

This European Standard is applicable to entertainment audio earplugs. It specifies requirements on construction, design, performance, marking and user information relating to the inclusion of the entertainment audio facility.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 352-8:2020(Main)
Hearing protectors - Safety requirements - Part 8: Entertainment audio earmuffs
SIST EN 352-8:2021

This European Standard is applicable to entertainment audio ear-muffs. It specifies requirements on construction, design, performance, marking and user information relating to the inclusion of the entertainment audio facility.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day