iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 2411:2000

(Main)

Rubber- or plastics-coated fabrics - Determination of coating adhesion (ISO 2411:2000)

Rubber- or plastics-coated fabrics - Determination of coating adhesion (ISO 2411:2000)

This European Standard specifies a method of determining the coating adhesion strength of coated fabrics.

Mit Kautschuk oder Kunststoff beschichtete Textilien - Bestimmung der Haftfestigkeit von Beschichtungen (ISO 2411:2000)

Diese Europäische Norm legt ein Verfahren zur Ermittlung der Haftfestigkeit von Beschichtungen bei beschichteten Textilien fest.

Supports textiles revêtus de caoutchouc ou de plastique - Détermination de l'adhérence du revêtement (ISO 2411:2000)

La présente norme internationale spécifie une méthode de détermination de la force d'adhérence du revêtement des supports textiles revêtus.

Gumirane ali plastificirane tekstilije - Ugotavljanje adhezije plasti (ISO 2411:2000)

General Information

Status
Withdrawn
Publication Date
30-Apr-2000
Withdrawal Date
10-Oct-2017
ICS
59.080.40 - Coated fabrics
Technical Committee
CEN/TC 248 - Textiles and textile products
Drafting Committee
CEN/TC 248/WG 4 - Coated fabrics
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
11-Oct-2017
Ref Project
SIST EN ISO 2411:2000 - Rubber- or plastics-coated fabrics - Determination of coating adhesion (ISO 2411:2000)

Relations

Replaced By
EN ISO 2411:2017 - Rubber- or plastics-coated fabrics - Determination of coating adhesion (ISO 2411:2017)
Effective Date
18-Oct-2017

Buy Standard

EN ISO 2411:2000EN ISO 2411:2000
PreviousNext
Standard
EN ISO 2411:2000
English language
15 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 2411:2000
01-november-2000
Gumirane ali plastificirane tekstilije - Ugotavljanje adhezije plasti (ISO 2411:2000)
Rubber- or plastics-coated fabrics - Determination of coating adhesion (ISO 2411:2000)
Mit Kautschuk oder Kunststoff beschichtete Textilien - Bestimmung der Haftfestigkeit von
Beschichtungen (ISO 2411:2000)
Supports textiles revetus de caoutchouc ou de plastique - Détermination de l'adhérence
du revetement (ISO 2411:2000)
Ta slovenski standard je istoveten z: EN ISO 2411:2000
ICS:
59.080.40 3RYUãLQVNRSUHYOHþHQH Coated fabrics
WHNVWLOLMH
SIST EN ISO 2411:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 2411:2000

---------------------- Page: 2 ----------------------

SIST EN ISO 2411:2000

---------------------- Page: 3 ----------------------

SIST EN ISO 2411:2000

---------------------- Page: 4 ----------------------

SIST EN ISO 2411:2000
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 5978:2023(Main)
Rubber- or plastics-coated fabrics - Determination of blocking resistance (ISO 5978:2023)
SIST EN ISO 5978:2023

This document specifies a method for the determination of the resistance of rubber- or plastics-coated fabric sheets to blocking when left in contact for specified temperature, time and pressure.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1875-3:2023(Main)
Rubber- or plastics-coated fabrics - Determination of tear strength - Part 3: Trapezoidal method (five-highest-peak calculation)
SIST EN 1875-3:2023

This document specifies test conditions and the procedure to be followed for determining the tear strength of a trapezoidal specimen of a rubber- or plastics-coated fabric, using a tensile testing machine. This test can be carried out:
-   either on test specimens conditioned in reference atmospheres; or
-   on test specimens which have been subjected to any necessary treatment for the application considered, for example dipping.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15618:2022(Main)
Rubber- or plastic-coated fabrics - Upholstery fabrics - Classification and methods of test
SIST EN 15618:2023

This document specifies a set of properties relevant to the assessment of upholstery coated fabrics for indoor furniture and the appropriate test methods to determine these properties. It also describes a matrix system to express the material properties of an upholstery fabric.
This document applies to upholstery fabrics both in domestic and public use, except when used for the seats of road or railway vehicles, boats or aeroplanes.
This document applies to upholstery fabrics with a coating on the wear face.
This document does not apply to textile upholstery fabrics covered by EN 14465.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 4674-2:2021(Main)
Rubber- or plastics-coated fabrics - Determination of tear resistance - Part 2: Ballistic pendulum method (ISO 4674-2:2021, Corrected version 2021-11)
SIST EN ISO 4674-2:2021

This document specifies a method for the determination of tear resistance based on the action of an active force applied to a notched test piece.
The test can be carried out on:
test pieces that have been conditioned in a standard atmosphere; or
test pieces that have undergone pre-treatment, e.g. water immersion.
The results obtained by this method cannot be compared with those obtained by methods involving constant rate of tear.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    14 pages
    German language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 6450:2021(Main)
Rubber- or plastics-coated fabrics - Determination of resistance to liquids (ISO 6450:2021)
SIST EN ISO 6450:2021

This document specifies two methods of evaluating the resistance of rubber- or plastics-coated fabrics to the action of liquids by measurement of selected properties of the materials before and after immersion in selected liquids.
The two methods are as follows:
—    Method A: total immersion with liquid;
—    Method B: one surface side immersion with liquid.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    18 pages
    German language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 5470-2:2021(Main)
Rubber- or plastics-coated fabrics - Determination of abrasion resistance - Part 2: Martindale abrader (ISO 5470-2:2021)
SIST EN ISO 5470-2:2021

This document specifies two separate methods for determining the resistance of a material to wet and dry abrasion.
It is applicable to the coated surface or surfaces of coated fabrics.
It does not apply to determining the abrasion behaviour of an uncoated surface of a coated fabric, for which the methods for uncoated textiles described in the ISO 12947 series apply.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    12 pages
    German language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17117-2:2021(Main)
Rubber- or plastics-coated fabrics - Mechanical test methods under biaxial stress states - Part 2: Determination of the pattern compensation values
SIST EN 17117-2:2021

This document describes methods for the determination of compensation values for orthotropic coated fabrics (different properties along ideally perpendicular directions, such as the weft and warp yarns for woven based coated fabrics, or along the courses and wales of knitted based coated fabrics) for determining cutting patterns.
NOTE The final interpretation and the determination of the compensation values remains the responsibility of the project engineer.
Annex C describes a method to determine comparable measures of extensibility along ideally perpendicular directions of coated fabrics. The comparable measures of extensibility can be used by design engineers to assess the extensibility of a coated fabric by comparison with other coated fabrics. In this way, they can help to interpret results of compensation tests. Moreover, they can be used by material suppliers to measure the consistency of extensibility along perpendicular directions of a coated fabric from batch to batch.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 3303-1:2020(Main)
Rubber- or plastics-coated fabrics - Determination of bursting strength - Part 1: Steel-ball method (ISO 3303-1:2020)
SIST EN ISO 3303-1:2020

This document specifies a method for the determination of the bursting strength of rubber or plastics coated fabrics, using a mechanically operated steel ball.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    10 pages
    German language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 22751:2020(Main)
Rubber or plastic coated fabrics - Physical and mechanical test - Determination of bending force (ISO 22751:2020)
SIST EN ISO 22751:2020

This document specifies a test method for the determination of the bending force of rubber or plastics-coated fabrics.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    10 pages
    German language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 3303-2:2020(Main)
Rubber- or plastics-coated fabrics - Determination of bursting strength - Part 2: Hydraulic method (ISO 3303-2:2020)
SIST EN ISO 3303-2:2020

This document specifies a method for the determination of the bursting strength of rubber - or plastics - coated fabrics, using one of two types of diaphragm bursting tester, designated type A and B, both operated by hydraulic pressure.
The type A test machine is applicable to materials having bursting strengths ranging from 350 kPa to 5 500 kPa and the type B test machine is applicable to materials of bursting strengths ranging from 70 kPa to 1 400 kPa.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    13 pages
    German language
    sale 10% off
    e-Library read for
    1 day